P.S. Free & New SD-WAN-Engineer dumps are available on Google Drive shared by Actual4dump: https://drive.google.com/open?id=1xKteDs6baqTLdtl1-VT6uO1EH1ok7LVV
Through years of marketing, our SD-WAN-Engineer latest certification guide has won the support of many customers. The most obvious data is that our products are gradually increasing each year, and it is a great effort to achieve such a huge success thanks to our product development. First of all, we have done a very good job in studying the updating of materials. In addition, the quality of our SD-WAN-Engineer real study braindumps is strictly controlled by teachers. So, believe that we are the right choice, if you have any questions about our study materials, you can consult us.
| Certification Vendor: | Palo Alto Networks |
|---|---|
| Exam Name: | Palo Alto Networks Certified SD-WAN Engineer |
| Exam Number: | SD-WAN-Engineer |
| Exam Format: | Multiple choice, Scenario-based |
| Related Certifications: | Network Security Professional Security Service Edge (SSE) Engineer |
| Certificate Validity Period: | 2 years |
| Exam Duration: | 90 minutes |
| Available Languages: | English |
| Sample Questions: | Palo Alto Networks SD-WAN-Engineer Sample Questions |
| Exam Way: | Online (Proctored) or Pearson VUE Test Center |
| Pre Condition: | Recommended: Network Security Professional certification or equivalent experience. |
| Official Syllabus URL: | https://www.paloaltonetworks.com/services/education/sd-wan-engineer |
>> Latest SD-WAN-Engineer Exam Price <<
Normally, you just need to wait for about five to ten minutes after you purchase our SD-WAN-Engineer learning braindumps. If you do not receive our SD-WAN-Engineer study materials, please contact our online workers. It is our great advantage to attract customers. In a word, our running efficiency on SD-WAN-Engineer Exam Questions is excellent. Time is priceless. Once you receive our email, just begin to your new learning journey.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 55
Which configuration requirement must be met to allow two branch ION devices to automatically establish a direct Dynamic VPN (branch-to-branch) connection for traffic flow, bypassing the Data Center?
Answer: B
Explanation:
Comprehensive and Detailed Explanation
Dynamic VPNs (also known as ION-to-ION or Branch-to-Branch VPNs) allow Prisma SD-WAN devices to establish direct, on-demand secure tunnels between branch sites to optimize latency for peer-to-peer traffic (e.g., VoIP calls between offices).
To enable this capability, the primary architectural requirement is the configuration of VPN Clusters.
A VPN Cluster defines a logical group of devices that are authorized to communicate with one another.
By default, or if devices are in different clusters without peering, the topology typically defaults to Hub-and-Spoke, where branches only talk to the Data Center.
When two branch ION devices are placed into the same VPN Cluster (or peered clusters), the controller shares the necessary reachability and cryptographic information between them.
Once in the same cluster, the ION devices monitor traffic. If a user at Branch A tries to contact a server at Branch B, the ION devices detect this interest. If a direct path is available (e.g., via public internet), they will dynamically negotiate a direct VPN tunnel, bypassing the Data Center hub. This offloads the hub and reduces latency. Option B is incorrect because SD-WAN eliminates manual GRE config. Option C is incorrect because dynamic VPNs are a performance feature, not just a disaster recovery feature.
NEW QUESTION # 56
Which specialized hardware feature is available on the ION 9000 series but NOT on the ION 3000 series, making it suitable for high-throughput Data Center deployments?
Answer: C
Explanation:
Comprehensive and Detailed Explanation
The ION 9000 is the flagship high-performance hardware model designed for large Data Centers and Campus Cores.
10GbE Connectivity (C): The defining hardware differentiator for the ION 9000 is its inclusion of multiple 10 Gigabit Ethernet (SFP+) interfaces. This allows it to interconnect with Data Center core switches at 10Gbps speeds, supporting the multi-gigabit aggregate throughput required for hub sites aggregating traffic from hundreds of branches.
ION 3000: The ION 3000 is a branch-tier device limited to 1 Gigabit Ethernet (copper/SFP) interfaces.
Bypass Pairs (B): Both models (and others like ION 2000/7000) support Bypass Pairs.
LTE/PoE (A/D): These are typically features of smaller branch/edge models (like ION 1200), not the high-end DC concentrators.
NEW QUESTION # 57
Which statements accurately describes how the Prisma SD-WAN zone-based firewall functions within a branch network?
Answer: B
Explanation:
The Prisma SD-WAN (ION) device includes a native, application-aware Zone-Based Firewall (ZBFW) that provides comprehensive security within the branch without the mandatory requirement for additional hardware.2 The fundamental principle of this architecture is the grouping of interfaces and sub-interfaces into logical Security Zones.3 Once these zones are defined (e.g., LAN, WAN, Guest, IoT), the administrator can create security policies that govern the traffic permitted to flow between them.4 Unlike traditional routers that rely on stateless Access Control Lists (ACLs) which are difficult to manage and lack application visibility, the Prisma SD-WAN ZBFW is stateful and application-aware.5 This means it can apply granular control over North-South traffic (flows moving between the LAN and the WAN/Internet) and East-West traffic (flows moving between different segments within the LAN, such as from a Guest zone to a Corporate zone).6 By using security zones, an ION device can ensure that even if two local networks are connected to the same physical appliance, they remain completely isolated unless a specific policy explicitly allows communication.
This "Zero Trust" approach at the branch edge allows organizations to segment vulnerable devices (like IoT) from critical internal resources and strictly control how users access the internet or the corporate data center.7 The ZBFW works in tandem with the global controller to ensure that security postures are consistent across all branch locations, eliminating the complexity of manual ACL management at each site.8
NEW QUESTION # 58
An administrator wants to configure a Path Policy that routes all "Guest Wi-Fi" traffic directly to the internet using the local broadband interface, bypassing all VPN tunnels.
Which Service & DC Group setting should be selected in the policy rule to achieve this "Direct Internet Access" (DIA) behavior?
Answer: C
Explanation:
Comprehensive and Detailed Explanation
In Prisma SD-WAN Path Policies, the Service & DC Group (Destination) field determines where the traffic is sent.
* Direct: This is the specific keyword/object used to instruct the ION to route traffic directly out to the local WAN interface (Local Breakout) towards the Internet, without encapsulation in a VPN tunnel.
This is the correct setting for Guest Wi-Fi, SaaS applications (like Office 365), or any public web browsing that does not need to be backhauled.
* Standard VPN / Default-Cluster: These options direct traffic into an IPSec overlay tunnel destined for a Data Center or another ION. Selecting these would "backhaul" the guest traffic, which contradicts the requirement for DIA.
When "Direct" is selected, the ION uses its available "Internet" category links. The policy can further specify which internet link to use (e.g., "Use Broadband, avoid LTE") via the path preference list, but the Destination type must be "Direct".
NEW QUESTION # 59
The UI triggers incident DEVICESW_CONCURRENT_FLOWLIMIT_EXCEEDED for a branch site. Based in the image below, which tool can be used to identify the host?
Answer: D
Explanation:
When a Prisma SD-WAN ION device triggers the
DEVICESW_CONCURRENT_FLOWLIMIT_EXCEEDED incident, it indicates that the number of active sessions has reached the hardware or software-defined capacity limit of that specific appliance. In the provided graph, we can see a massive spike in concurrent TCP flows on May 13th, reaching nearly 500k, which is a clear indicator of anomalous behavior-likely a "top talker" host, a malware outbreak, or a misconfigured application generating excessive connections.
To identify the specific host responsible for this surge, administrators should navigate to Monitor # Activity
# Flows. This interface, commonly known as the Flow Browser, provides the most granular visibility into real-time and historical session data within the Prisma SD-WAN fabric. Unlike "Transaction Stats," which provide high-level summaries, or "New Flows," which only show the rate of session initiation, the Flows view allows an engineer to filter and sort the active session table by metadata such as Source IP, Destination IP, Application, and Site.
By utilizing the Flow Browser, an administrator can quickly group flows by "Source IP" to pinpoint exactly which internal host is consuming the most flow table entries. This is the standard "Day 2" operational workflow for troubleshooting performance and capacity incidents. While running a tcpdump (Option A) is a valid diagnostic for packet-level analysis, it is inefficient for identifying a single host among hundreds of thousands of flows and can further tax the device's CPU during a high-load event. The Monitor # Activity # Flows tool is designed specifically for this type of scale, providing the necessary visibility to remediate the flow limit exhaustion and restore normal network operations.
NEW QUESTION # 60
......
Valid SD-WAN-Engineer Test Blueprint: https://www.actual4dump.com/Palo-Alto-Networks/SD-WAN-Engineer-actualtests-dumps.html
BTW, DOWNLOAD part of Actual4dump SD-WAN-Engineer dumps from Cloud Storage: https://drive.google.com/open?id=1xKteDs6baqTLdtl1-VT6uO1EH1ok7LVV