What's more, part of that ExamcollectionPass LEED-AP-BD-C dumps now are free: https://drive.google.com/open?id=1I9OEOJGBbHg0jc79FRj9QrNIw3LKvbKW
Our company employs a professional service team which traces and records the popular trend among the industry and the latest update of the knowledge about the LEED-AP-BD-C exam reference. We give priority to keeping pace with the times and providing the advanced views to the clients. We keep a close watch at the most advanced social views about the knowledge of the test LEED-AP-BD-C Certification. Our experts will renovate the test bank with the latest LEED-AP-BD-C exam practice question and compile the latest knowledge and information into the questions and answers.
| Section | Objectives |
|---|---|
| Topic 1: Indoor Environmental Quality | - Occupant health and comfort
|
| Topic 2: Sustainable Sites | - Site development
|
| Topic 3: Water Efficiency | - Water conservation strategies
|
| Topic 4: Innovation | - Innovative sustainability practices
|
| Topic 5: Location and Transportation | - Site selection and connectivity
|
| Topic 6: Regional Priority | - Regional environmental priorities
|
| Topic 7: Integrative Process | - Discovery and planning
|
| Topic 8: Materials and Resources | - Resource management
|
| Topic 9: Energy and Atmosphere | - Energy performance
|
>> LEED-AP-BD-C New Braindumps Book <<
You may think choosing practice at the first time is a little bit like taking gambles. However, you can be assured by our LEED-AP-BD-C learning quiz with free demos to take reference, and professional elites as your backup. Accuracy rate is unbelievably high and helped over 98 percent of exam candidates pass the exam. By imparting the knowledge of the LEED-AP-BD-C Exam to those ardent exam candidates who are eager to succeed like you, they treat it as responsibility to offer help. So please prepare to get striking progress if you can get our LEED-AP-BD-C study guide with following traits for your information
NEW QUESTION # 249
For a task chair purchased for a healthcare facility, which portion of the product contributes toward Materials and Resources Credit, Furniture and Medical Furnishings?
Answer: B
Explanation:
Explanation
The metal base, 20% of product by weight, which do not contain heavy metals and is not plated with hexavalent chromium, contributes toward Materials and Resources Credit, Furniture and Medical Furnishings.
This is because it meets the criteria of Option 1: Minimal Chemical Content, which requires that all components that constitute at least 5%, by weight, of a furniture or medical furnishing assembly must contain less than 100 ppm of at least four of the five chemical groups listed in the option. The other portions of the product either do not meet the 5% weight threshold (wheels), or contain chemicals that are restricted by Option 1 (fabric, armrests).References: LEED v4 BD+C Reference Guide, Materials and Resources Category, MRc Furniture and Medical Furnishings, Option 1. Minimal Chemical Content, page 711.
NEW QUESTION # 250
Under Energy and Atmosphere Prerequisite, Fundamental Commissioning and Verification, a current facilities requirements and operations and maintenance plan must contain which information necessary to operate the building efficiently?
Answer: D
Explanation:
A current facilities requirements and operations and maintenance plan must contain any changes in schedules or setpoints for different seasons, days of the week, and times of day. This is to ensure that the building systems are operating efficiently and according to the design intent. The other options are too limited or too specific and do not cover all the possible variations in schedules or setpoints.
Reference: LEED v4 BD+C Reference Guide, Energy and Atmosphere Category, EAp Fundamental Commissioning and Verification, page 569.
NEW QUESTION # 251
Questions 1-5 are based on the same project scenario. Please use the scenario information when answering.
A hospital certified underLEED V5in 2018 is designing and constructing a 21,000 ft² (1,950.96 m²) vertical addition, plus vegetated terraces and a mechanical penthouse.
The original hospital achieved the Gold certification level and was built with the capacity to add three floors-levels six through eight-to the top of the structure. This addition requires partial demolition of the roof and the floor below.
The project is designed to be architecturally cohesive with the existing building façade and is targeting Platinum certification under LEED v5.
The campus is in a dense urban area adjacent to several bus stops, a light-rail transit station within a 2,500 ft. (762 m) walking distance, and a bicycle docking point at the main entrance to the property. An on-campus shuttle service connects patients, visitors, and staff from the parking areas to each medical building and the light-rail station.
The healthcare campus has existing infrastructure; therefore, no new roads, sidewalks, parking structures, or ground-level landscaping will be installed.
The new floors have separate mechanical systems in the penthouse, but piping for public and patient restrooms, janitor closets, and staff break rooms connects directly to the main hospital plumbing system.
The newly installed medical equipment uses gas, steam, and chilled water supplied by the campus central plant.
Based on the project design and the credit options that the project team may attempt, what is the highest LEED certification level that can be achieved?
Answer: A
Explanation:
Platinum is the highest certification level available under LEED and is therefore the correct response to the question as written. However, the scenario does not provide a completed scorecard or enough performance data to prove that this particular hospital addition will actually earn Platinum certification. The project must satisfy every applicable prerequisite, earn the required total points, and meet any LEED v5 Platinum-level requirements relating to energy efficiency, operational carbon, and renewable-energy use. The project's use of gas and central-plant thermal energy therefore requires careful decarbonization analysis and could affect its final certification result. Targeting Platinum does not guarantee achievement; certification depends on documented compliance, the total verified score, and successful review of all submitted prerequisites and credits.
NEW QUESTION # 252
The maximum number of points for Water Efficiency Credit, Cooling Tower Water Use can be obtained by
Answer: D
Explanation:
Achieving a minimum of 10 cooling tower cycles by increasing the level of make-up water treatment is the way to obtain the maximum number of points for Water Efficiency Credit, Cooling Tower Water Use. This credit aims to conserve water used for cooling tower equipment by encouraging the use of non-potable water sources and increasing the cycles of concentration1. The cycles of concentration are the ratio of the concentration of dissolved solids in the blowdown water to the concentration of dissolved solids in the make- up water2. Increasing the cycles of concentration reduces the amount of make-up water and blowdown water, and thus saves water and energy2. The credit has two options: Option 1. Non-potable Water Source (1 point) and Option 2. Cooling Tower Water Use (2 points). Option 1 requires using at least 50% non-potable water for cooling tower make-up water1. Option 2 requires achieving a minimum number of cooling tower cycles based on the quality of the make-up water, as specified in Table 1 of the credit requirements1. The maximum number of cycles is 10, which can be achieved by increasing the level of make-up water treatment to meet the criteria for conductivity, silica, and alkalinity1. Therefore, Option 2 is the way to obtain the maximum number of points for this credit. References:
* Credit: Cooling tower water use | U.S. Green Building Council
* Cooling Tower Evaporation Credits | WaterSignal
NEW QUESTION # 253
In pursuit of the Materials and Resources Credit, Building Disclosure and Optimization - Sourcing of Raw Materials, Option 2. Leadership Extraction Practices, which of the following statements is true related to products purchased for temporary use (formwork, bracing and scaffolding) on the project?
Answer: A
Explanation:
Temporary wood products cannot be included in the calculations for the Materials and Resources Credit, Building Disclosure and Optimization - Sourcing of Raw Materials, Option 2. Leadership Extraction Practices. This is because the credit only applies to permanently installed building products, not to products purchased for temporary use on the project1. The other options are false. If any temporary wood materials are included in the calculation, they must be excluded from the total value of permanently installed building products1. Non-certified wood materials do not contribute to other credits, unless they meet other criteria such as recycled content or regional materials2. FSC-certified wood materials purchased for more than one project cannot be applied to other projects seeking LEED certification, unless they are reused or salvaged materials3.
Reference:
* Building product disclosure and optimization - sourcing of raw materials, p. 2
* LEED v4 for Building Design and Construction, p. 323
* NC-v4 MRc3: Building product disclosure and optimization - sourcing of raw materials, p. 3
NEW QUESTION # 254
......
Our LEED-AP-BD-C practice braindumps beckon exam candidates around the world with our attractive characters. Our experts made significant contribution to their excellence of the LEED-AP-BD-C study materials. So we can say bluntly that our LEED-AP-BD-C simulating exam is the best. Our effort in building the content of our LEED-AP-BD-C learning questions lead to the development of learning guide and strengthen their perfection.
Pass LEED-AP-BD-C Exam: https://www.examcollectionpass.com/USGBC/LEED-AP-BD-C-practice-exam-dumps.html
BONUS!!! Download part of ExamcollectionPass LEED-AP-BD-C dumps for free: https://drive.google.com/open?id=1I9OEOJGBbHg0jc79FRj9QrNIw3LKvbKW