Nowadays the competition in the job market is fiercer than any time in the past. If you want to find a good job๏ผyou must own good competences and skillful major knowledge. So owning the NSE7_FSN_AR-7.6 certification is necessary for you because we will provide the best study materials to you. Our NSE7_FSN_AR-7.6 exam torrent is of high quality and efficient, and it can help you pass the test successfully. The product we provide with you is compiled by professionals elaborately and boosts varied versions which aimed to help you learn the NSE7_FSN_AR-7.6 Study Materials by the method which is convenient for you. They check the update every day, and we can guarantee that you can get a free update service from the date of purchase.
| Section | Objectives |
|---|---|
| Topic 1: SD-WAN | - Traffic steering
|
| Topic 2: Enterprise Firewall | - Central management
|
>> New NSE7_FSN_AR-7.6 Exam Guide <<
Our accurate, reliable, and top-ranked Fortinet NSE7_FSN_AR-7.6 exam questions will help you qualify for your Fortinet NSE7_FSN_AR-7.6 certification on the first try. Do not hesitate and check out Itcertmaster excellent Fortinet NSE7_FSN_AR-7.6 Practice Exam to stand out from the rest of the others.
NEW QUESTION # 65
Which three factors about service-level agreement (SLA) targets and SD-WAN rules should you consider when configuring SD-WAN rules? (Choose three.)
Answer: B,C,D
Explanation:
Fortinet distinguishes measured link-quality metrics from SLA targets. Best performance, called Best Quality in current FortiOS terminology, compares member performance using a selected quality criterion; it does not use an SLA target as the eligibility mechanism. Thus, A is correct.
SLA-target eligibility belongs to the Lowest Cost (SLA) strategy, including Lowest Cost with load balancing, making D correct. When an SD-WAN rule references a particular performance SLA, it selects one SLA target ID from that performance SLA, so E is also correct. Additional performance SLAs can be referenced separately, but multiple target IDs from the same SLA are not selected simultaneously in that rule reference.
Option B confuses measurement with eligibility. Performance SLA processes measure member metrics independently; configuring an SLA target supplies thresholds against which those measurements are evaluated. Consequently, B and C are incorrect.
NEW QUESTION # 66
While troubleshooting a FortiGate web filter issue, users report that they cannot access any websites, even though those sites are not explicitly blocked by any web filter profiles that are applied to firewall policies.
What are the three most likely reasons for this behavior? (Choose three answers)
Answer: A,B,C
Explanation:
The reported symptom-users unable to access any websites despite no explicit blocks in the profile-points to systemic connectivity or configuration issues rather than specific URL filtering rules.
Option B (SSL/TLS Inspection): When Deep Inspection is enabled, the FortiGate acts as a Man-in-the-Middle (MitM) and re-signs server certificates using its own CA. If the clients (browsers) do not trust this CA (i.e., the certificate is not installed in their Trusted Root store), they will reject the connection with certificate errors, effectively preventing access to all HTTPS websites.
Option D (DNS): Web browsing relies on DNS resolution. If the configured DNS server is unreachable or failing, the FortiGate (or the client) cannot resolve FQDNs to IP addresses. Consequently, browsers will fail to load any page, resulting in a total loss of web access.
Option E (License): If the FortiGuard Web Filtering license expires, the FortiGate can no longer query the FortiGuard Distribution Network (FDN) for ratings. By default, or if the allow-when-rating-error setting is disabled (a common security practice), the FortiGate will block all web traffic that it cannot rate, often displaying a " Web Filter Service Error " or invalid license page.
Option A is incorrect because clearing the cache only increases latency, it does not block traffic. Option C is incorrect because webfilter-force-off is typically used to disable the service (often allowing traffic to bypass checks if the service is down), rather than blocking it.
NEW QUESTION # 67
Refer to the exhibit.
The output from a collector agent log is shown. The collector agent is showing the status of a workstation as Not Verified. What are two common causes for this message? (Choose two.)
Answer: A,D
Explanation:
The correct answers are B and C.
The study guide has a section titled "Not Verified Status on the Collector Agent" and states:
"The collector agent cannot verify if the user is still logged in" and lists these common causes:
"A firewall is blocking traffic to port 139 and 445"
"The workstation remote registry service is not running"
The guide also explains the verification method:
"For WMI polling mode, the collector agent checks the WMI service. For all the other modes, the collector agent checks the HKEY_USERS hive through remote registry services." If the workstation does not respond to these checks, the status can become not verified An additional requirements slide in the same study guide confirms:
"TCP ports 139 and 445 must be open between the collector agent and all workstations"
"Remote registry service must be up and running on each workstation"
Why the other options are wrong:
A is wrong because the study guide mentions a workstation coming out of hibernate mode under a different problem: "No Internet After IP Address Change", not as a common cause of Not Verified status D is wrong because DNS resolution issues are also discussed under the IP address change scenario, where the collector agent uses DNS to resolve the workstation name after an IP change. That is separate from the Not Verified causes listed for this log message So the verified answers are: B, C.
NEW QUESTION # 68
Refer to the exhibits.
An administrator is attempting to advertise the network configured on port3. However, FGT-A is not receiving the prefix.
Which two actions can the administrator take to fix this problem? (Choose two.)
Answer: A,C
NEW QUESTION # 69
Refer to the exhibit.
The modified output of live routing kemel is shown
Which two statements about the output are (rue? (Choose two.)
Answer: A,C
Explanation:
We must analyze the flags (*, > , S, O, B) and Administrative Distances (AD) shown in the get router info routing-table database exhibit to determine the correct statements.
Analysis for Option A (The BGP route to 10.0.4.0/24 is not in the forwarding information base):
True. Look at the entry for 10.0.4.0/24.
There is an OSPF route: O * > 10.0.4.0/24 [110/2]. The * indicates it is in the FIB, and > indicates it is the selected route.
There is a BGP route: B 10.0.4.0/24 [200/10]. This line lacks the * flag.
Reason: The OSPF route has an Administrative Distance of 110. The BGP route (iBGP) has an AD of 200.
Since 110 is lower than 200, OSPF wins, and the BGP route is not installed in the Forwarding Information Base (FIB).
Analysis for Option B (The default static route through 10.200.1.254 is in the forwarding information base):
True. Look at the 0.0.0.0/0 entries.
The first entry is S * > 0.0.0.0/0 [10/0] via 10.200.1.254.
The * flag confirms this specific route is installed in the FIB.
The second static route (via 10.200.2.254) has a higher distance ([20/0]) and no * flag, so it is inactive.
Why C is False: ECMP (Equal Cost Multi-Path) requires routes to have the same cost/priority. Here, one static route has AD 10 and the other has AD 20. They are not equal, so ECMP is not performed.
Why D is False: The routing table database shows active routes, not the raw Link State Advertisement (LSA) database. You cannot determine the number of LSAs received solely from this output.
Reference:
FortiGate Security 7.6 Study Guide (Routing): " The routing table database displays all known routes... The * indicates the route is in the FIB... Lower Administrative Distance is preferred. "
NEW QUESTION # 70
......
It is understandable that different people have different preference in terms of NSE7_FSN_AR-7.6 study guide. Taking this into consideration, and in order to cater to the different requirements of people from different countries in the international market, we have prepared three kinds of versions of our NSE7_FSN_AR-7.6 Preparation questions in this website, namely, PDF version, APP online and software version, and you can choose any one of them as you like. You will our NSE7_FSN_AR-7.6 exam dumps are the best!
Valid NSE7_FSN_AR-7.6 Exam Duration: https://www.itcertmaster.com/NSE7_FSN_AR-7.6.html