2026 Latest PrepAwayPDF NSEI_OTS_AR-7.6 PDF Dumps and NSEI_OTS_AR-7.6 Exam Engine Free Share: https://drive.google.com/open?id=143kjsYfZbMsApLsqSg44TCvkU8o500al
In order to allow you to safely choose PrepAwayPDF, part of the best Fortinet certification NSEI_OTS_AR-7.6 exam materials provided online, you can try to free download to determine our reliability. We can not only help you pass the exam once for all, but also can help you save a lot of valuable time and effort. PrepAwayPDF can provide you with the real Fortinet Certification NSEI_OTS_AR-7.6 Exam practice questions and answers to ensure you 100% pass the exam. When having passed Fortinet certification NSEI_OTS_AR-7.6 exam your status in the IT area will be greatly improved and your prospect will be good.
| Section | Objectives |
|---|---|
| Monitoring and Risk Assessment | - Analyze security reports from FortiAnalyzer - Perform risk assessment and management - Create FortiAnalyzer event handlers |
| Asset Management | - Use Fortinet Security Fabric for an OT network - Implement device detection on FortiGate and FortiNAC - Explain OT standards and Fortinet compliance |
| Network Access Control | - Configure network access authentication - Configure network segmentation schemas - Explain OT Ethernet concepts |
| Network Security | - Configure virtual patching - Configure security inspections for industrial protocols - Configure automation |
>> NSEI_OTS_AR-7.6 Latest Test Practice <<
Will you feel nervous in the exam? If you do, just try us NSEI_OTS_AR-7.6 study materials, we will release your nerves as well build up your confidence for the exam. NSEI_OTS_AR-7.6 Soft test engine can stimulate the real exam environment, so that you can know the procedure of the real exam, and your nervous will be relieved. In addition, NSEI_OTS_AR-7.6 Study Materials are high quality, and they can help you pass the exam. They also contain both questions and answers, you can have a quickly check after practicing.
NEW QUESTION # 49
What are two advantages provided by industrial Ethernet? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are B. Real-time control and D. Determinism . The study guide defines industrial Ethernet as the "use of Ethernet and TCP/IP as transport mechanisms for industrial protocols" and states that it provides "real-time control," "low latency," and "determinism (meaning reliable and predictable data delivery)" in harsh environments. It further explains that industrial Ethernet "provides deterministic communication between machine controllers, actuators, sensors, and other units." These statements directly confirm that the two key advantages are real-time control and determinism.
The other options are not supported by the study guide as core advantages of industrial Ethernet. Encryption is not listed as one of the benefits in this section, and remote access is discussed elsewhere in the OT architecture but not as a defining advantage of industrial Ethernet itself. The guide is explicit that the main benefits here are predictable delivery and real-time communication, which are essential in industrial control environments where timing and reliability matter.
NEW QUESTION # 50
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in a firewall policy, which two statements are correct? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are A and C .
Option C is correct because the profile clearly contains the Operational Technology category and specific OT application signatures such as Modbus and IEC.60870.5.104 . The study guide says "You can use application control signatures to detect OT protocols" and "You can filter to a specific OT protocol." That means OT application signatures are active in this sensor profile.
Option A is correct because the guide explains that application control works at different levels: "Detection of protocol (one detection per session)" and "Message level (one detection per protocol message)." It also says you can use application signatures for "granular message type identification." In the exhibit, IEC.
60870.5.104.Control.Functions is explicitly configured, which is a granular IEC message/control-level signature rather than only a protocol-level match. That means logging and control can occur at the IEC command level.
Option B is not correct because the profile shows Modbus configured at the parent protocol level as Monitor
, while the guide states that the "parent signature takes precedence over the child signature." Since protocol-level detection is one detection per session , that does not mean FortiGate will necessarily log each Modbus command individually.
Option D is incorrect because even though the broader Operational Technology category is set to block, the profile includes specific application and filter overrides for Modbus and IEC 104 behavior. So the resulting effect is not simply that all OT protocols are blocked .
NEW QUESTION # 51
During layer 2 polling , which two pieces of information are gathered by FortiNAC to identify a device?
(Choose two answers)
Answer: A,D
NEW QUESTION # 52
Refer to the exhibit.
The Core Network Security Connectors page of the FortiGate-2 device is shown. Which statement is correct? (Choose one answer)
Answer: A
Explanation:
Based on the provided exhibit and the OT Security 7.6 Architect curriculum regarding the Fortinet Security Fabric :
* Fabric Role : The exhibit clearly shows that FortiGate-2 has the role set to Join Fabric . This confirms it is a downstream device and not the Fabric Root (eliminating Option A).
* Upstream Connection : The device is configured to point to an Upstream FortiGate at IP address
10.1.2.254 .
* Fabric Status : The status is currently displayed as Not Connected . In a standard Fortinet Security Fabric deployment, once a downstream device is configured to join the fabric, it sends a request to the upstream root device. The root FortiGate must then explicitly authorize the downstream unit before the connection is established and the status changes to " Connected. "
* Authorization Requirement : The " Not Connected " status, while having the upstream IP correctly configured, is the classic indicator that the authorization step is pending on the root FortiGate.
Furthermore, under the LAN Edge Devices section, it shows another downstream FortiGate requiring authorization on this specific unit, highlighting that authorization is a manual security requirement for all stages of the Fabric hierarchy.
* FortiAnalyzer Status : While the Logging & Analytics section shows FortiAnalyzer is Disabled , this is a configuration choice and does not prevent the Security Fabric from connecting; therefore, configuring it is not the solution to the connectivity status shown (eliminating Option C).
In summary, FortiGate-2 cannot join the fabric until an administrator logs into the Root FortiGate (10.1.2.254) and authorizes the join request from FortiGate-2.
NEW QUESTION # 53
Refer to the exhibit.
A simplified OT network is shown. You want to optimize the protection of this OT network. Which two controls must you implement? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are B. IPS on FortiGate_Level5 and C. Virtual patching on FortiGate_Level2 .
The study guide explains that "the first line of defense is securing the IT side of your network" and that FortiGate should be placed to protect ICS environments and stop threats from propagating from IT into OT. It also states that IPS improves OT security because "today's threat landscape requires IPS to block a wider range of threats and improve OT security" and that in IPS mode, vulnerable devices are protected . This makes FortiGate_Level5 , at the upper boundary near the DMZ and external connectivity, the correct place to implement IPS as a primary protection control.
The study guide also states in the Purdue model section that "Level 2 consists of the processes and programs that control the PLCs, RTUs, and IEDs found at Level 1" and that "it is necessary to segment, or even microsegment, these servers with firewall segmentation, along with policies that include application control and virtual patching." In addition, the virtual patching section says "Virtual patching protects OT devices that have not yet been updated against vulnerability exploits" and applies when traffic related to the vulnerable device reaches the firewall policy. Since FortiGate_Level2 sits between the process network and the control network, it is the right enforcement point for virtual patching to protect the PLC-side assets.
Option A is not one of the best answers because offline IDS only detects and logs attacks; the guide says "no traffic flows through FortiGate" in offline IDS mode, whereas IPS can actually block threats. Option D is also not the best answer because OT signatures are enabled within the IPS framework, but the stronger control explicitly described for this design is to deploy IPS at the upper boundary and virtual patching closer to vulnerable OT devices .
NEW QUESTION # 54
......
If you visit our website PrepAwayPDF, then you will find that our Fortinet NSEI_OTS_AR-7.6 practice questions are written in three different versions: PDF version, Soft version and APP version. All types of NSEI_OTS_AR-7.6 Training Questions are priced favorably on your wishes. Obtaining our Fortinet NSEI_OTS_AR-7.6 study guide in the palm of your hand, you can achieve a higher rate of success.
Practice NSEI_OTS_AR-7.6 Test Engine: https://www.prepawaypdf.com/Fortinet/NSEI_OTS_AR-7.6-practice-exam-dumps.html
BONUS!!! Download part of PrepAwayPDF NSEI_OTS_AR-7.6 dumps for free: https://drive.google.com/open?id=143kjsYfZbMsApLsqSg44TCvkU8o500al