ExamPassdump SD-WAN-Engineer 최신 PDF 버전 시험 문제집을 무료로 Google Drive에서 다운로드하세요: https://drive.google.com/open?id=1HILjWp1EPgLWjFMHksobMmMn5G7B0TTc
많은 시간과 돈이 필요 없습니다. 30분이란 특별학습가이드로 여러분은Palo Alto Networks SD-WAN-Engineer인증시험을 한번에 통과할 수 있습니다, ExamPassdump에서Palo Alto Networks SD-WAN-Engineer시험자료의 문제와 답이 실제시험의 문제와 답과 아주 비슷한 덤프만 제공합니다.
| Section | Weight | Objectives |
|---|---|---|
| Operations and Monitoring | 38% | - Monitoring and Troubleshooting
|
| Planning and Design | 24% | - Architecture Design
|
| Deployment and Configuration | 38% | - Prisma SD-WAN Deployment
|
>> SD-WAN-Engineer합격보장 가능 덤프공부 <<
ExamPassdump선택으로Palo Alto Networks SD-WAN-Engineer시험을 패스하도록 도와드리겠습니다. 우선 우리ExamPassdump 사이트에서Palo Alto Networks SD-WAN-Engineer관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ExamPassdump에 신뢰감을 느끼게 됩니다. ExamPassdump에서 제공하는Palo Alto Networks SD-WAN-Engineer덤프로 시험 준비하세요. 만약 시험에서 떨어진다면 덤프전액환불을 약속 드립니다.
질문 # 59
When configuring a Path Policy rule for a "Real-Time Video" application, the administrator wants to ensure the traffic uses the path with the lowest packet loss.
How does the Prisma SD-WAN ION determine the "Packet Loss" metric for a given path when there is no active user traffic flowing on that link?
정답：B
설명：
Comprehensive and Detailed Explanation
Prisma SD-WAN utilizes Link Quality Monitoring (LQM) to maintain a real-time health score for every WAN path.
To ensure the system knows the quality of a path before sending critical user traffic onto it, the ION device uses Active Probing.
Mechanism: The ION sends synthetic probe packets (typically UDP) across the Secure Fabric (VPN tunnels) and Direct Internet paths to its peers. These probes measure Latency, Jitter, and Packet Loss.
Active vs. Passive: While the system does use Passive Monitoring (observing actual user flows) when traffic is present to reduce overhead, Active Probes are essential for idle links or backup paths. Without active probing, the ION would have no data to make an intelligent steering decision for the first packet of a new video call. This ensures that "Real-Time" policies always have up-to-date metrics to select the best path immediately.
질문 # 60
A network installer is at a remote branch site to deploy a new ION 3000 device. The device has been racked, cabled to the internet, and powered on. The installer has the "Claim Code" displayed on the email sent by the administrator.
When the administrator enters this Claim Code into the Prisma SD-WAN portal, what is the immediate status of the device before the configuration is fully pushed?
정답：C
설명：
Comprehensive and Detailed Explanation
In the Prisma SD-WAN (CloudGenix) Zero Touch Provisioning (ZTP) lifecycle, the device status transitions through specific stages that indicate its readiness and connectivity.
When an administrator enters the Claim Code (or Serial Number/Claim Code pair) into the portal, the device status immediately updates to "Claimed".
This status confirms that the portal has registered the device's unique identity and associated it with the customer's tenant. However, "Claimed" does not necessarily mean the device is fully operational or passing traffic yet. It simply signifies that the ownership is verified.
Once the physical device at the site successfully connects to the internet and reaches the Prisma SD-WAN Controller (using the call-home function), it will authenticate using its installed certificate. Upon successful authentication and the establishment of the secure control channel, the status will transition from "Claimed" to "Online".
Only after the device is "Online" can the controller push the specific site configuration (Device Shell), policies, and IP addressing required for the device to become "Provisioned" and eventually "Active" in the data path. If the device remains in the "Claimed" state for an extended period, it indicates that the hardware has not yet successfully contacted the controller, which prompts troubleshooting of the physical internet circuit or firewall rules upstream.
질문 # 61
Which metrics can be monitored at the individual Prisma SD-WAN ION device level to assess its health and operational performance?
정답：A
설명：
To ensure the stability and performance of the SD-WAN fabric, Prisma SD-WAN provides granular visibility into the health of each Instant-On Network (ION) appliance. While the solution is primarily application- defined, monitoring the underlying physical and system resources of the hardware or virtual instance is critical for proactive maintenance and troubleshooting.
At the individual device level, administrators can monitor system resource utilization, which includes CPU usage, memory (RAM) consumption, and disk space availability.1 High CPU or memory usage can indicate that the device is reaching its throughput limits or that a specific process (such as deep packet inspection) is overtaxing the system. Disk utilization is monitored to ensure there is sufficient space for local logs and system operations.
Beyond internal system health, interface-level metrics are essential. This includes monitoring interface bandwidth utilization to identify bottlenecks on WAN or LAN ports. Crucially, operational performance is also assessed through error and discard counters on each interface. High error rates or frequent packet discards often signal physical layer issues (like bad cabling), duplex mismatches, or upstream provider congestion. While VPN status and application flows are vital for network-wide visibility, the core health of an ION device is defined by these foundational system and interface metrics.
Monitoring these specific parameters allows network engineers to distinguish between an application performance issue caused by network latency and one caused by a local hardware resource constraint.
질문 # 62
Based on the HA topology image below, which two statements describe the end-state when power is removed from the ION 1200-S labeled "Active", assuming that the ION labeled "Standby" becomes the active ION?
(Choose two.)
정답：A,D
설명：
Comprehensive and Detailed Explanation
This scenario depicts a High Availability (HA) topology utilizing the ION 1200-S model's Fail-to-Wire (bypass) capabilities to share WAN links between two devices without needing external switches for every WAN connection.
1. WAN Link Availability (Statement A):
The diagram illustrates a "daisy-chain" cabling method supported by the ION 1200-S bypass pairs.
* ISP A (Green): Connects directly to the "Standby" (Left) unit first. Since the Standby unit remains powered on, it maintains direct access to ISP A.
* LTE/5G (Blue): Connects to the "Active" (Right) unit first. The connection then loops through a bypass pair on the Active unit to the Standby unit. When power is removed from the "Active" unit, the fail-to-wire relays on its Ethernet ports close physically. This creates a passive electrical bridge that connects the LTE modem directly to the Standby unit. The Standby unit (now becoming Active) will detect the link state change and successfully utilize the LTE connection. Therefore, both WAN links remain usable.
2. LAN Failover Mechanism (Statement C):
Prisma SD-WAN ION devices typically use a VRRP-like mechanism for LAN redundancy.
* When the "Active" node fails (loses power), the "Standby" node stops receiving keepalives and promotes itself to the Active state.
* To ensure downstream switches and clients immediately send traffic to the new Active unit, it must update their ARP tables. It does this by broadcasting a Gratuitous ARP (GARP) packet for the Virtual IP (VIP) address of the Switch Virtual Interfaces (SVIs). This action informs the network that the MAC address associated with the Gateway I1P is now reachable via the port connected to the new Active ION.234
질문 # 63
An ION 3000 device at a remote branch has suffered a critical hardware failure and must be replaced via the RMA process. The administrator has received the replacement unit.
What is the correct procedure to transfer the configuration and license from the defective unit to the replacement unit to ensure minimal downtime and retention of historical data?
정답：D
설명：
Comprehensive and Detailed Explanation
The RMA replacement process in Prisma SD-WAN is designed to be seamless, leveraging the decoupling of logical configuration from physical hardware.
* Replace Device Workflow: The administrator should use the "Replace Device" (or RMA) function within the portal. This workflow allows you to select the "Defective" device (old serial) and the
"Replacement" device (new serial).
* Configuration Transfer: Once executed, the system automatically binds the existing Device Shell (which contains all interface configs, routing policies, and site associations) to the new hardware's serial number. The new device, once connected to the internet, will "call home," identify itself, and download the exact configuration of the previous unit.
* License Transfer: While the configuration moves automatically, the Support License transfer typically requires a specific step in the Customer Support Portal (CSP) or happens automatically if processed as a formal RMA order. Options A and D are incorrect because they involve manual reconfiguration, which is unnecessary and error-prone. Option C is incorrect as the ION platform relies on cloud-based config management, not local USB backups for hardware swaps.
질문 # 64
......
경쟁율이 치열한 IT업계에서 아무런 목표없이 아무런 희망없이 무미건조한 생활을 하고 계시나요? 다른 사람들이 모두 취득하고 있는 자격증에 관심도 없는 분은 치열한 경쟁속에서 살아남기 어렵습니다. Palo Alto Networks인증 SD-WAN-Engineer시험패스가 힘들다한들ExamPassdump덤프만 있으면 어려운 시험도 쉬워질수 밖에 없습니다. Palo Alto Networks인증 SD-WAN-Engineer덤프에 있는 문제만 잘 이해하고 습득하신다면Palo Alto Networks인증 SD-WAN-Engineer시험을 패스하여 자격증을 취득해 자신의 경쟁율을 업그레이드하여 경쟁시대에서 안전감을 보유할수 있습니다.
SD-WAN-Engineer인기자격증 덤프문제: https://www.exampassdump.com/SD-WAN-Engineer_valid-braindumps.html
그 외, ExamPassdump SD-WAN-Engineer 시험 문제집 일부가 지금은 무료입니다: https://drive.google.com/open?id=1HILjWp1EPgLWjFMHksobMmMn5G7B0TTc