To let the clients be familiar with the atmosphere and pace of the real 300-110 exam we provide the function of stimulating the exam. In such a way, our candidates will become more confident by practising on it. And our expert team updates the 300-110 Study Guide frequently to let the clients practice more. So the quality of our 300-110 practice materials is very high and we can guarantee to you that you will have few difficulties to pass the exam.
| Section | Weight | Objectives |
|---|---|---|
| Mobility | 25% | - Design mobility groups - Validate mobility tunneling - Optimize client roaming - Site Tags |
| Wired and Wireless Infrastructure | 30% | - Physical infrastructure requirements - Logical infrastructure requirements - Design wireless bridging (mesh) - Design radio management - Design high-density wireless networks - Design for data, voice, video, location |
| Wireless Site Survey | 25% | - Predictive site survey - Planning tools and network metrics evaluation - Layer 1 site survey analysis - Post-deployment site survey - Pre-deployment site survey - Collect design requirements and evaluate constraints - Material attenuation and its design effects |
| WLAN High Availability | 20% | - Design AP high availability - Design controller high availability |
>> Sample Cisco 300-110 Questions <<
With our 300-110 test prep, you don't have to worry about the complexity and tediousness of the operation. Our 300-110 exam torrent is available in different versions. Whether you like to study on a computer or enjoy reading paper materials, our test prep can meet your needs. Our PDF version of the 300-110 quiz guide is available for customers to print. You can print it out, so you can practice it repeatedly conveniently. And our 300-110 Exam Torrent make it easy for you to take notes on it so that your free time can be well utilized and you can often consolidate your knowledge. Everything you do will help you successfully pass the exam and get the card.
NEW QUESTION # 38
A customer wants to provide wireless coverage in a parking lot outside of a building. An engineer determines that three APs are required. The APs can be mounted on the light poles in the parking lot because there are cable routes already in place for these locations. The closest wiring closet is approximately 200 meters away.
Which setup powers and connects the APs back to the customer network?
Answer: B
Explanation:
This question hinges on a fundamental network engineering constraint: the maximum transmission distance of copper Ethernet cabling. IEEE 802.3 standards specify a maximum segment length of 100 meters (328 feet) for all standard PoE and Ethernet over Category 5e, 6, or 6A UTP copper cabling. The parking lot light poles are approximately 200 meters from the closest wiring closet - more than double the maximum copper distance. This immediately eliminates Options A and D, which specify Category 6 UTP cabling: at 200 meters, UTP copper cannot reliably carry Ethernet at any supported speed, and PoE cannot be delivered over this distance regardless of standard. The correct solution is fiber optic connectivity between the wiring closet and the parking lot, combined with a local AC/DC power module at each pole location. Fiber optic cabling supports single-mode runs of kilometers and multi-mode runs of hundreds of meters at Gigabit speeds - easily spanning 200 meters. At the AP mounting location on the light pole, an AC/DC power module (powered from the pole ' s existing electrical supply) converts AC power to the DC power the AP requires.
Option B (fiber with 802.3af) is incorrect because PoE cannot be delivered over fiber - 802.3af requires copper cabling for simultaneous power and data delivery. Reference: WLSD Study Guide - Outdoor AP Deployment, Fiber vs. Copper Distance Limitations, Outdoor Power Solutions.
NEW QUESTION # 39
A wireless engineer must design a WLAN for a university that requires outdoor Wi-Fi access.
Which obstruction has the greatest effect on wireless signal propagation?
Answer: D
Explanation:
In outdoor wireless deployments, foliage -- particularly dense trees -- represents the most significant and variable RF obstruction that engineers must account for during site survey and design. Trees are problematic for multiple compounding reasons: the high water content of living tissue causes signal absorption consistent with the principle that water is an effective absorber of
2.4 GHz and 5 GHz RF energy; the irregular branching structure causes multi-path scattering; and foliage density changes seasonally, meaning signal propagation characteristics measured during winter may differ substantially from summer readings when leaves are fully developed. A fully leafed deciduous tree can attenuate a 5 GHz signal by 6?5 dB depending on density and depth.
NEW QUESTION # 40
An engineer must configure the virtual IP address on multiple controllers in a mobility group. Which rule must the engineer follow to ensure proper roaming?
Answer: C
Explanation:
In a Cisco wireless mobility group, all Wireless LAN Controllers (WLCs) must be configured with the same virtual IP address to ensure proper roaming. The virtual IP address is a Layer 3 construct used by wireless clients during the DHCP renewal process when roaming between subnets managed by different WLCs. All WLCs in the same mobility group use the same virtual IP (typically from the unused 1.1.1.0/24 or similar non- routable space) so that clients receive consistent DHCP server responses regardless of which controller they are associated with. If different virtual IP addresses were used (Option B), clients roaming between controllers would experience DHCP failures during inter-controller roaming because the DHCP server address seen by the client would change. Options A and C relate to DNS hostname configuration, which is useful for AP discovery but does not affect the roaming behavior of client devices. The virtual IP address consistency across all mobility group members is a fundamental requirement for seamless inter-controller roaming. Reference: WLSD Study Guide - Mobility Group Configuration, Virtual IP Address, Inter- Controller Roaming Requirements.
NEW QUESTION # 41
A network engineer is configuring high availability on an access point. What is the maximum number of controllers that can be configured?
Answer: A
Explanation:
When configuring high availability on a Cisco access point, the AP can be configured with a maximum of three controllers: a primary controller, a secondary controller, and a tertiary controller. This three- tier hierarchy defines the failover order -- the AP first attempts to join its primary controller, then the secondary if the primary is unavailable, and finally the tertiary if both the primary and secondary are unreachable. After exhausting all three configured options, the AP enters a discovery process to find any available controller. This three-controller configuration (primary, secondary, tertiary) allows network engineers to implement N+1 redundancy where critical APs can be directed to specific backup controllers in a deliberate sequence. Limiting the configuration to only 2 controllers (as stated in Option B which would be incorrect) would reduce redundancy options for environments with geographically distributed controllers requiring specific failover paths.
NEW QUESTION # 42
During a post-deployment site survey, issues are found with non-Wi-Fi interference. What should the engineer use to identify the source of the interference?
Answer: B
Explanation:
Cisco Spectrum Expert is a dedicated spectrum analysis tool designed to identify and analyze non-Wi-Fi interference sources at Layer 1. During a post-deployment site survey, it can detect interference from various devices such as cordless phones, Bluetooth devices, microwave ovens, video cameras, and other unlicensed RF emitters. The tool provides a visual representation of the RF environment across the frequency spectrum, allowing engineers to pinpoint the exact source of interference and characterize it by duty cycle, frequency, and interference pattern. A network analysis module (Option A) operates at Layer 2 and above, unable to detect non-802.11 RF emissions. Wireless intrusion prevention (Option B) detects rogue APs and 802.11 attacks but not Layer 1 RF noise. Wireshark (Option C) is a packet capture tool for Layer 2-7 analysis and cannot detect non-Wi-Fi RF energy. Reference: WLSD Study Guide - Layer 1 Spectrum Analysis, Post- Deployment Survey, Non-Wi-Fi Interference Identification.
NEW QUESTION # 43
......
Nowadays there is a growing tendency in getting a certificate. 300-110 study materials offer you an opportunity to get the certificate easily. 300-110 exam dumps are edited by the experienced experts who are familiar with the dynamics of the exam center, therefore 300-110 Study Materials of us are the essence for the exam. Besides we are pass guarantee and money back guarantee. Any other questions can contact us anytime.
300-110 Braindumps Torrent: https://www.trainingdump.com/Cisco/300-110-practice-exam-dumps.html