BONUS!!! Download part of Itexamguide SD-WAN-Engineer dumps for free: https://drive.google.com/open?id=1fsNSM0Ii05jHrZZAWrWfmTzDLyNA2YEJ
We are now in an era of technological development. SD-WAN-Engineer had a deeper impact on our work. Passing the SD-WAN-Engineer exam is like the vehicle's engine. Only when we pass the exam can we find the source of life and enthusiasm, become active and lasting, and we can have better jobs in todayโs highly competitive times. To pass the SD-WAN-Engineer Exam, careful planning and preparation are crucial to its realization. Of course, the path from where you are to where you want to get is not always smooth and direct. Therefore, this is the point of our SD-WAN-Engineer exam materials, designed to allow you to spend less time and money to easily pass the exam.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
>> SD-WAN-Engineer Valid Braindumps Pdf <<
Business Applications SD-WAN-Engineer certification exam with our braindumps, just send us your failed score report. After we confirm your SD-WAN-Engineer score report and we can give full refund of the SD-WAN-Engineer Exam to you in time. Meanwhile, if you also need to take other related exams you also can choose another exam instead of the failed exam.
NEW QUESTION # 64
A network installer is attempting to claim a new ION device using the "Claim Code" method. The device is connected to the internet, but the status in the portal remains stuck at "Claimed" and does not transition to
"Online". The installer connects a laptop to the LAN port of the ION and can successfully browse the internet, confirming the uplink is active.
What is the most likely cause of the device failing to reach the "Online" state?
Answer: D
NEW QUESTION # 65
An administrator is configuring an ION 2000 device for a deployment where high availability is required, but the site has only a single internet circuit. The administrator configures a Bypass Pair (Fail-to-Wire) on ports 1 and 2 connecting the ISP modem to the legacy firewall.
If the ION device loses power, what is the resulting behavior of the traffic flowing through this Bypass Pair?
Answer: B
Explanation:
Comprehensive and Detailed Explanation
The Bypass Pair feature on Prisma SD-WAN ION devices (specifically supported models like ION 2000, 3000, 7000, 9000) is a hardware-based resiliency mechanism known as Fail-to-Wire.
Operation: A "Bypass Pair" logically groups two physical interfaces (e.g., WAN 1 and LAN 1). Under normal operation, the ION processes traffic between them.
Power Loss: In the event of a total power loss (or critical software failure), a mechanical relay inside the device physically closes the circuit between the two ports.
Result: This creates a direct electrical connection (like a patch cable) between the upstream device (ISP Modem) and the downstream device (Legacy Firewall or Router). This ensures that internet connectivity is preserved for the site, even if the SD-WAN appliance is completely dead. This is critical for single-point-of-failure deployments where maintaining basic dial-tone is more important than SD-WAN optimization during a hardware outage.
NEW QUESTION # 66
Based on the HA topology image below, which two statements describe the end-state when power is removed from the ION 1200-S labeled "Active", assuming that the ION labeled "Standby" becomes the active ION?
(Choose two.)
Answer: A,D
Explanation:
Prisma SD-WAN High Availability (HA) for branch ION devices, particularly the Gen-2 ION 1200-S, is designed to provide "100% WAN Capacity" preservation during a hardware or power failure. This is achieved through the use of Bypass Pairs (Fail-to-Wire). In the provided topology, the ISP A and LTE/5G circuits are cross-connected using the bypass ports (typically ports 3 and 4 on the ION 1200-S).
When the "Active" ION device loses power, the internal physical relays in its bypass ports transition to a closed state, effectively creating a physical bridge between the ports. In this scenario, the LTE/5G signal- which enters the Active ION's port 4-is mechanically bridged to port 3, allowing it to pass through to port 4 of the Standby ION. Simultaneously, ISP A is already connected to the Standby ION. Consequently, once the Standby device completes its transition to the "Active" state, it has physical access to both WAN circuits, validating Statement A.
Regarding the LAN transition, Prisma SD-WAN does not use standard VRRP for ION-to-ION HA; instead, it uses a proprietary Control Plane HA mechanism. When the failover occurs, the newly active ION takes over the IP addresses of all configured Switch Virtual Interfaces (SVIs) and LAN interfaces. To ensure the downstream Layer 2 infrastructure (like the LAN switches shown in the diagram) updates its MAC address tables to point to the new physical hardware for those IPs, the newly active ION immediately broadcasts a Gratuitous ARP (GARP). This ensures that LAN traffic is correctly steered to the new device without a significant timeout, validating Statement C.
NEW QUESTION # 67
In the Prisma SD-WAN portal, an administrator is viewing the "Media" analytics for a branch site to troubleshoot complaints about poor voice quality.
When calculating the Mean Opinion Score (MOS) for voice traffic, which two metrics does the system prioritize active monitoring for, even when no user voice traffic is present on the link? (Choose two.)
Answer: A,B
Explanation:
Comprehensive and Detailed Explanation
Prisma SD-WAN calculates the Mean Opinion Score (MOS) to provide a standardized metric (1-5) for voice quality. To ensure the system always knows the "voice readiness" of a path-even before a call starts-it uses Active Probes (synthetic UDP packets).
While latency is measured, the MOS calculation algorithm is most heavily penalized by Packet Loss (D) and Jitter (B).
Packet Loss: Even a small amount of loss (e.g., >1%) dramatically reduces voice clarity, causing dropouts.
Jitter: High variance in packet arrival time (jitter) causes the "robotic" voice effect and buffer underruns.
The system continuously measures these specific metrics on all WAN links using synthetic probes. If the packet loss or jitter exceeds the threshold defined in the "Path Quality Profile" (e.g., Voice Profile), the path is marked as non-compliant, and the MOS score drops, triggering a policy action to move the flow. Throughput (C) is less critical for voice as calls consume very little bandwidth (e.g., 64-100 Kbps), making congestion (loss/jitter) the primary enemy, not raw speed.
NEW QUESTION # 68
An administrator has configured a Zone-Based Firewall (ZBFW) policy on a branch ION. They created a rule to "Allow" traffic from the "Guest" zone to the "Internet" zone. However, users in the "Guest" zone are reporting they cannot reach a specific public website, and the Flow Browser shows the flow state as
"REJECT".
What is the most likely reason for this specific rejection, assuming the "Allow" rule is correctly placed at the top of the list?
Answer: D
Explanation:
Comprehensive and Detailed Explanation
In Prisma SD-WAN, security policies can be applied via Policy Stacks, which often have a hierarchy.
* Stack Precedence: A common configuration involves a Global Security Stack (applied to all sites) and a Local/Site Security Stack (specific to one site). If the administrator configured a "Global" rule that says "Deny Access to Gambling Sites" (or a specific IP list), and that rule is higher in the binding order or part of a higher-priority stack, it will enforce the block before the local "Allow Guest to Internet" rule is processed.
* Specifics of "REJECT": The state REJECT specifically implies a policy enforcement action (sending a TCP RST or ICMP Unreachable) rather than a silent drop or a routing failure.
* Why not A? If the "Allow" rule is at the top and matches the traffic parameters (Zone/IP), the Default Deny at the bottom would never be reached. The issue implies a higher priority Deny exists.
NEW QUESTION # 69
......
No one can be responsible for you except yourself. So you must carefully plan your life and future career development. Our SD-WAN-Engineer training quiz might offer you some good guidance. Maybe you never find out your real interest in the past. Now, everything is different. With our SD-WAN-Engineer Study Guide, you will find that studying knowledage and making a progress is quite interesting and easy. And the most important is that you will get the best reward according to the SD-WAN-Engineer certification.
New SD-WAN-Engineer Learning Materials: https://www.itexamguide.com/SD-WAN-Engineer_braindumps.html
P.S. Free & New SD-WAN-Engineer dumps are available on Google Drive shared by Itexamguide: https://drive.google.com/open?id=1fsNSM0Ii05jHrZZAWrWfmTzDLyNA2YEJ