P.S. Free 2026 Nokia SRAN-Radio-Network-Performance-Optimization dumps are available on Google Drive shared by Exam4Docs: https://drive.google.com/open?id=1ff_W8pPI4wKUmULysrC4KOrDQvPIiK2H
Of course, we also need to realize that it is very difficult for a lot of people to pass the exam without valid SRAN-Radio-Network-Performance-Optimization study materials in a short time, especially these people who have not enough time to prepare for the exam, that is why many people need to choose the best and most suitable SRAN-Radio-Network-Performance-Optimization Study Materials as their study tool. We believe that if you have the good SRAN-Radio-Network-Performance-Optimization study materials when you are preparing for the exam, it will be very useful and helpful for you to pass exam and gain the related certification successfully.
| Section | Weight | Objectives |
|---|---|---|
| Performance Troubleshooting | 20-25% | - Troubleshooting tools utilization - Optimization case studies - Root cause analysis methodologies - Common performance issues diagnosis - Network failure identification and resolution |
| SRAN Optimization Tools and Reports | 10-15% | - Configuration management for optimization - Automated optimization features - Report generation and interpretation - Nokia NetAct and performance tools |
| Radio Network Optimization Techniques | 25-30% | - Handover optimization - Interference analysis and mitigation - Parameter tuning best practices - Capacity optimization strategies - Coverage optimization methods - Load balancing techniques |
| SRAN Architecture and Fundamentals | 15-20% | - Radio access concepts and principles - SRAN solution components and functions - Single RAN integration principles - SRAN network architecture overview |
| Radio Network Performance Monitoring | 20-25% | - KPI definition and measurement - Real-time network monitoring techniques - Performance data collection and analysis - Performance monitoring tools and dashboards - Threshold configuration and alerting |
>> Test SRAN-Radio-Network-Performance-Optimization Score Report <<
Our SRAN-Radio-Network-Performance-Optimization learning questions engage our working staff in understanding customers’ diverse and evolving expectations and incorporate that understanding into our strategies, thus you can 100% trust our SRAN-Radio-Network-Performance-Optimization exam engine. And our professional SRAN-Radio-Network-Performance-Optimization Study Materials determine the high pass rate. According to the research statistics, we can confidently tell that 99% candidates after using our products have passed the SRAN-Radio-Network-Performance-Optimization exam.
NEW QUESTION # 22
In NR SA Option 2, the UE is camped on an SA serving cell. An IRAT handover is triggered for a multi-QCI call, QCI 1 and QCI 6, due to weak coverage of the serving cell. What will happen to both QCIs during the IRAT handover toward LTE?
Answer: C
Explanation:
The correct answer is D.
In 5G SA Option 2, NR works independently with the 5G Core, but interworking with LTE/EPC can be supported for mobility continuity. When IRAT handover toward LTE is triggered due to weak NR coverage, the goal is to preserve the active services during mobility.
For a multi-QCI service:
QCI 1 normally represents the voice bearer, such as VoLTE/IMS voice continuity after movement to LTE.
QCI 6 normally represents a non-GBR data bearer.
During a supported IRAT handover from NR SA to LTE, both the voice bearer and data bearer can be transferred to LTE, assuming proper interworking, bearer mapping, and LTE coverage availability.
Option C is incorrect because IRAT mobility from NR SA to LTE is supported in properly configured networks. Option A is incorrect because the voice bearer is the most critical bearer to preserve. Option B is also not the best answer because the data bearer does not necessarily need to be released during IRAT handover.
Therefore, the expected result is:
Both QCI 1 voice and QCI 6 data continue on LTE.
NEW QUESTION # 23
In the context of mmWave deployments , what is the primary benefit of analog beamforming ?
Answer: C
Explanation:
The correct answer is A .
In mmWave systems, beamforming is essential because FR2 signals suffer from high path loss and blockage.
Analog beamforming uses fewer RF chains than fully digital beamforming, so it is cheaper and less complex in terms of RF hardware, power consumption, and implementation. Research and industry references explain that analog and hybrid beamforming architectures reduce the number of required ADCs/RF chains compared with fully digital beamforming, lowering cost and power complexity.
However, analog beamforming has limitations. It usually forms one beam, or a limited number of beams, at a time from a panel. Supporting multiple independent simultaneous beams and more UEs per sector is more associated with digital or hybrid beamforming, not pure analog beamforming.
Therefore, the primary benefit is:
Low cost and low complexity for coverage at higher mmWave bands.
NEW QUESTION # 24
Consider that the UE is performing handover from LTE to NR with the help of features CB007742 / CB008731 . Referring to the picture below, at what stage can the handover be triggered from LTE to NR?
Answer: A
Explanation:
The correct answer is C: From Stage 3 .
In LTE-to-NR mobility, the handover or redirection decision is normally based on a combination of:
LTE serving-cell signal level becoming weak enough, and
NR neighbor-cell signal level becoming strong enough.
From the diagram:
In Stage 1 , LTE is still good and NR is still weak, so LTE-to-NR HO should not be triggered.
In Stage 2 , the NR neighbor signal is improving, but the required combined LTE/NR mobility condition is not yet fully satisfied.
In Stage 3 , the NR neighbor signal has crossed the required NR threshold, while the LTE serving-cell signal has degraded enough to justify moving the UE from LTE to NR. This is the first valid stage where LTE-to- NR HO can be triggered.
In Stage 4 , NR is already clearly strong, but the handover could already have been triggered earlier in Stage 3.
NEW QUESTION # 25
Single Network Slice Selection Assistance Information , or S-NSSAI , identifies a network slice. Which of the following statements are correct regarding NSSAI ? Refer to the diagram for basic information.
Answer: H
Explanation:
The correct answer is D: A, B, C, and D .
In 5G network slicing, S-NSSAI identifies a single network slice. It is composed of:
SST , or Slice/Service Type
SD , or Slice Differentiator
Statement A is correct.
The combination of SST + SD can uniquely identify a slice. For example, two slices may both use SST 1 for eMBB/MBB-type service, but different SD values can separate them for different enterprises, tenants, or service groups.
Statement B is correct.
SST is mandatory. It is an 8-bit numeric field that indicates the expected slice/service behavior, such as eMBB, URLLC, or mMTC.
Statement C is correct.
SD is optional. It is a 24-bit field used to differentiate multiple slices that may share the same SST.
Statement D is correct.
SST may use standardized values, such as SST 1 for eMBB, SST 2 for URLLC, and SST 3 for mMTC/MIoT.
It may also use operator-specific or non-standardized values depending on deployment requirements.
NEW QUESTION # 26
Identify the missing network components X, Y, and Z in the architecture diagram.
Answer: B
Explanation:
The correct answer is B .
In the 5G Core , component X is connected to:
N2 from NG-RAN
N11 toward SMF
N15 toward PCF
N26 toward the EPC mobility entity
These are typical interfaces of the AMF , or Access and Mobility Management Function . Therefore, X = AMF .
In the EPC , component Z is connected to:
S1-MME from eNB
S11 toward the gateway
N26 toward the 5GC AMF
These are typical interfaces of the MME , or Mobility Management Entity . Therefore, Z = MME .
Component Y is outside the core user-plane path and represents the external service network connected through N6/SGi , commonly shown as IMS in voice-service architecture diagrams. Therefore, Y = IMS .
So the correct mapping is:
X: AMF, Y: IMS, Z: MME.
NEW QUESTION # 27
......
Our users are all over the world, and our privacy protection system on the SRAN-Radio-Network-Performance-Optimization study guide is also the world leader. Our SRAN-Radio-Network-Performance-Optimization exam preparation will protect the interests of every user. Now that the network is so developed, we can disclose our information at any time. You must recognize the seriousness of leaking privacy. For security, you really need to choose an authoritative product like our SRAN-Radio-Network-Performance-Optimization learning braindumps.
Valid Dumps SRAN-Radio-Network-Performance-Optimization Ebook: https://www.exam4docs.com/SRAN-Radio-Network-Performance-Optimization-study-questions.html
DOWNLOAD the newest Exam4Docs SRAN-Radio-Network-Performance-Optimization PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1ff_W8pPI4wKUmULysrC4KOrDQvPIiK2H