P.S. Free & New NSEI_OTS_AR-7.6 dumps are available on Google Drive shared by PracticeDump: https://drive.google.com/open?id=1j8Jt8ShRHfOYblKUk_CMgKHmXBVAohhP
Questions of Fortinet NSE I - OT Security 7.6 Architect desktop practice exam software are similar to the actual NSEI_OTS_AR-7.6 exam questions. This gives you a genuine feeling of being in an NSEI_OTS_AR-7.6 exam atmosphere. This feature helps you become familiar with the NSEI_OTS_AR-7.6 real test format and improves your ability to do well on the actual NSEI_OTS_AR-7.6 exam.
| Section | Weight | Objectives |
|---|---|---|
| Network Security | 25% | - Deep inspection for industrial protocols (Modbus, DNP3, OPC) - Security automation and threat response - Virtual patching for legacy OT systems |
| Monitoring and Risk Assessment | 25% | - Event handling and logging with FortiAnalyzer 7.6 - OT-focused risk assessment and management - Threat detection using FortiSIEM 7.4 |
| Asset Management | 25% | - OT security standards and compliance (IEC 62443, NIST) - Device detection and inventory using FortiGate & FortiNAC - Fortinet Security Fabric for OT environments |
| Network Access Control | 25% | - Authentication and access policies for OT devices - OT Ethernet and industrial communication models - Purdue Model and secure network segmentation |
>> Guide Fortinet NSEI_OTS_AR-7.6 Torrent <<
Time is nothing; timing is everything. Stop hesitating. NSEI_OTS_AR-7.6 VCE dumps help you save time to clear exam. If you choose valid exam files, you will pass exams one-shot; you will obtain certification in the shortest time with our Fortinet VCE dumps. If you complete for a senior position just right now, you will have absolutely advantage over others. Now, don't wasting time again, just start from our NSEI_OTS_AR-7.6 VCE Dumps. Excellent & valid VCE dumps will make you achieve your dream and go to the peak of your life ahead of other peers.
NEW QUESTION # 53
Refer to the exhibit.
The OT devices behind the ruggedized FortiGate have vulnerabilities and you want to apply a virtual patching profile in the firewall policy. Why is Virtual Patching not available in the Security Profiles section? (Choose one answer)
Answer: D
Explanation:
The correct answer is A. You must enable Virtual Patching in the Feature Visibility section .
The study guide states clearly that "By default, virtual patching profiles are hidden on the GUI, and you must enable them through System > Feature Visibility." That exactly matches the situation in the exhibit, where Virtual Patching does not appear under Security Profiles . So the issue is not that the feature is unsupported, but that it is simply hidden in the GUI until it is enabled.
The other options do not answer the question being asked. A valid OT security service license is required for virtual patching signatures and protection workflow, and OT signatures are relevant to IPS-based OT protection, but those do not explain why the menu item itself is missing from the Security Profiles section .
The guide specifically identifies Feature Visibility as the reason the Virtual Patching profile is not shown in the GUI. Therefore, the required action is to enable Virtual Patching in System > Feature Visibility .
NEW QUESTION # 54
You want to improve the security of your OT network and therefore deploy a FortiGate device with the OT signatures database. Which two statements about this database are true? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are A and D .
Option A is correct because the study guide states that for OT protocol coverage, "a valid OT security service license is required to receive updates on both intrusion prevention and application control signatures." It also shows "Valid license required" in the FortiGuard subscriptions section for OT protocol coverage. This confirms that a valid OT security service license is required to use and maintain the OT signatures database correctly.
Option D is also correct because the guide explicitly shows the CLI configuration used "To enable OT signatures" :
config ips global
set exclude-signatures none
end
It then states that "By default, OT signatures are excluded from the signatures lists on the GUI until you enable them on the CLI." This directly confirms that you must set exclude-signatures to none in the CLI to enable OT signatures.
Option B is incorrect because the study guide does not say you manually import the OT signatures database.
Instead, it explains that FortiGuard maintains updated OT signatures and that a valid license is required to receive updates. Option C is incorrect because the guide clearly says OT signatures are excluded by default until enabled from the CLI.
NEW QUESTION # 55
Refer to the exhibits.
The Playbook Monitor dashboard and the analysis of the corresponding incident analysis are shown. You created the playbook with the objective of automatically attaching the report to the incident that was created.
Which two statements are correct? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are C and D .
Option D is correct because the Playbook Monitor clearly shows the starter as On_Demand and the trigger as user(admin) . The study guide states that "ON_DEMAND: The playbook runs when an administrator manually starts it" and also notes that to run it manually, you select the playbook and click Run . This exactly matches the exhibit, so the playbook was manually triggered.
Option C is also correct. The study guide explains that "tasks run one after another" and that "if needed, the output of one task can be used by the tasks that follow it." It also gives an example where workflow logic matters, such as creating an incident and then attaching details to it. In the exhibit, the sequence shown is Attach_report , then Run_report , then Create_Incident , while the incident analysis shows no report attached . Since the report must exist and the incident must already be available before it can be attached properly, the task order is wrong and must be reordered.
Option B is incorrect because the monitor shows multiple tasks completed successfully, not only Create_Incident . Option A is not the best answer because the main problem demonstrated by the exhibits is not simply waiting time, but the incorrect workflow order. The playbook completed successfully, yet the report is still not attached, which indicates a design issue in the task sequence rather than just a delay.
NEW QUESTION # 56
Refer to the exhibit.
The Core Network Security Connectors page of a FortiGate device is shown. You are configuring the Security Fabric in your OT network. One of the devices is not sending logs to FortiAnalyzer. When you check the status of the FortiGate device, it is Disabled as shown in the exhibit. Which two actions must you perform to enable this FortiGate device to send logs to FortiAnalyzer? (Choose two answers)
Answer: A,B
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of OT Security 7.6 Study guides:
The correct answers are A and C .
A is correct because the exhibit explicitly shows Logging & Analytics # FortiAnalyzer: Disabled on this FortiGate. The FortiGate must therefore have its FortiAnalyzer logging destination enabled and configured.
The study guide explains that the FortiAnalyzer Fabric connector consolidates traffic logs and, importantly, that "each FortiGate in the Security Fabric logs traffic to FortiAnalyzer independent of the root or other leaf devices." This means each FortiGate requires its own functioning logging connection to FortiAnalyzer; being a Security Fabric member alone does not cause its logs to pass through the root FortiGate.
C is correct because FortiAnalyzer must accept and authorize the FortiGate as a managed/logging device before the FortiGate can establish the normal logging relationship. This complements the FortiGate-side Logging & Analytics configuration. The study guide ' s Security Fabric logging architecture shows individual FortiGate devices maintaining FortiAnalyzer log connections , with FortiAnalyzer receiving and correlating their traffic and UTM logs. It specifically states that if the root FortiGate is unavailable, logging from leaf FortiGate devices to FortiAnalyzer continues to function , confirming that the FortiGate-to-FortiAnalyzer logging relationship is direct.
B is incorrect because configuring Fabric settings on FortiAnalyzer is not the missing step indicated by the exhibit. The problem shown is that FortiAnalyzer logging is Disabled on the FortiGate .
D is incorrect because authorization on the root FortiGate concerns joining and trusting a FortiGate as a Security Fabric member. It does not authorize that FortiGate as a logging device on FortiAnalyzer. The study guide explicitly distinguishes the architecture by stating that every FortiGate logs to FortiAnalyzer independently of the root .
NEW QUESTION # 57
Refer to the exhibit.
A partial OT network is shown. In this OT network, you must add additional security measures to detect OT protocols and, therefore, increase the traffic visibility. Which security sensor must you implement to detect the OT protocols in this network? (Choose one answer)
Answer: C
Explanation:
The correct answer is C. Application sensor set to monitor on all the FortiGate devices .
The study guide clearly explains that application control is the feature used to identify OT protocols. It states that "application control detects the protocols used in applications like Modbus, IEC 104, and the contents of the telecontrol messages" and also says "You can use application control signatures to detect OT protocols." It further shows an example where a Modbus application control profile is enabled on a firewall policy "for OT protocol visibility in the monitor status." This directly matches the requirement in the question, which is to detect OT protocols and increase traffic visibility .
The other options do not fit the requirement as precisely. Device detection is for identifying devices and collecting endpoint information, not for detecting industrial protocols. Inline IDS and IPS are focused more on detecting or blocking attacks, exploits, protocol abnormalities, and known vulnerabilities. While IPS can inspect some OT traffic, the study guide distinguishes it from application control by stating that IPS signatures tend to detect exploits, whereas application control signatures tend to provide protocol detection at various levels . Therefore, the required security sensor for OT protocol detection and traffic visibility is the application sensor in monitor mode .
NEW QUESTION # 58
......
PracticeDump is website that can help a lot of IT people realize their dreams. If you have a IT dream, then quickly click the click of PracticeDump. It has the best training materials, which is PracticeDump;s Fortinet NSEI_OTS_AR-7.6 Exam Training materials. This training materials is what IT people are very wanted. Because it will make you pass the exam easily, since then rise higher and higher on your career path.
New NSEI_OTS_AR-7.6 Exam Pattern: https://www.practicedump.com/NSEI_OTS_AR-7.6_actualtests.html
What's more, part of that PracticeDump NSEI_OTS_AR-7.6 dumps now are free: https://drive.google.com/open?id=1j8Jt8ShRHfOYblKUk_CMgKHmXBVAohhP