BONUS!!! Download part of NewPassLeader JN0-683 dumps for free: https://drive.google.com/open?id=1q3lfILetNvkec_98zuk1NUFCX6iPaiVZ
After taking a bird's eye view of applicants' issues, NewPassLeader has decided to provide them with the real JN0-683 Questions. These JN0-683 dumps pdf is according to the new and updated syllabus so they can prepare for JN0-683 certification anywhere, anytime, with ease. A team of professionals has made the product of NewPassLeader after much hard work with their complete potential so the candidates can prepare for Data Center, Professional (JNCIP-DC) (JN0-683) practice test in a short time.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
For successful preparation, it is essential to have good Juniper JN0-683 Exam Dumps and to prepare questions that may come up in the exam. NewPassLeader helps candidates overcome all the difficulties they may encounter in their exam preparation. To ensure the candidates' satisfaction, NewPassLeader has a support team that is available 24/7 to assist with a wide range of issues.
NEW QUESTION # 31
Exhibit.
Referring to the exhibit, why is the active source field blank for the entry that uses the 00:0c:29:e8:b7:39 MAC address?
Answer: C
Explanation:
In this scenario, the active source field is blank for the MAC address 00:0c:29:e8:b7:39, indicating an issue with how this MAC entry is being processed within the EVPN/VXLAN environment.
Step-by-Step Analysis:
* Understanding the MAC Entry:
* The active source field should normally indicate the source of the route advertisement for a specific MAC address within the EVPN. If it is blank, it suggests that there is a problem with how this entry is being learned or propagated.
* Possible Issues:
* Option A:If the EVPN route for this MAC address does not have a valid next hop, the entry might exist in the MAC table, but it will not have a valid path for forwarding, leading to a blank active source.
* Option B:If the ARP lookup had failed, the entry might not even appear in the MAC table.
However, the entry does exist, suggesting that ARP is not the primary issue here.
* Option C:If the host were locally connected, the active source should reflect a local interface, but the field is blank, ruling out local connection as the cause.
* Option D:Multicast EVPN routes typically do not appear in this manner in the MAC table, and this would not cause the active source to be blank.
Conclusion:The most logical explanation is that the EVPN route for this host exists but does not have a valid next hop, leading to the absence of an active source. This is consistent with how EVPN routing tables work in a VXLAN environment, where the lack of a valid next hop would prevent proper route advertisement and forwarding for the specific MAC address.
NEW QUESTION # 32
You are deploying multiple Juniper switches at the same location. Your switches are currently using the factory-default configuration.
In this scenario, which two statements are correct? (Choose two.)
Answer: B,C
Explanation:
By default, Juniper switches with factory-default configurations attempt to obtain an IP address via DHCP on any connected and operational interface, not just the management interface.
The DHCP server configuration can include options to provide Junos version requirements, such as bootfile information, to DHCP clients for automated provisioning or upgrades.
NEW QUESTION # 33
You are deploying an EVPN-VXLAN overlay. You must ensure that Layer 3 routing happens on the spine devices. In this scenario, which deployment architecture should you use?
Answer: D
Explanation:
* Understanding EVPN-VXLAN Architectures:
* EVPN-VXLAN overlays allow for scalable Layer 2 and Layer 3 services in modern data centers.
* CRB (Centralized Routing and Bridging):In this architecture, the Layer 3 routing is centralized on spine devices, while the leaf devices focus on Layer 2 switching and VXLAN tunneling. This setup is optimal when the goal is to centralize routing for ease of management and to avoid complex routing at the leaf level.
* ERB (Edge Routing and Bridging):This architecture places routing functions on the leaf devices, making it a distributed model where each leaf handles routing for its connected hosts.
* Architecture Choice for Spine Routing:
* Given the requirement to ensure Layer 3 routing happens on the spine devices, theCRB (Centralized Routing and Bridging)architecture is the correct choice. This configuration offloads routing tasks to the spine, centralizing control and potentially simplifying the overall design.
* Explanation:
* With CRB, the spine devices perform all routing between VXLAN segments. Leaf switches handle local switching and VXLAN encapsulation, but routing decisions are centralized at the spine level.
* This model is particularly advantageous in scenarios where centralized management and routing control are desired, reducing the complexity and configuration burden on the leaf switches.
Data Center References:
* The CRB architecture is commonly used in data centers where centralized control and simplified management are key design considerations. It allows the spines to act as the primary routing engines, ensuring that routing is handled in a consistent and scalable manner across the fabric.
NEW QUESTION # 34
You are asked to build redundant gateways in your EVPN-VXLAN environment, but you must conserve address space because these gateways must span across seven PES. What should you implement on the PEs lo satisfy these requirements?
Answer: A
Explanation:
* Redundant Gateways in EVPN-VXLAN:
* In an EVPN-VXLAN environment, providing redundant gateway functionality typically involves the use of Anycast Gateway. This allows multiple PEs (Provider Edge devices) to use the same IP address and MAC address for the gateway, enabling seamless failover and redundancy without IP conflicts.
* Conserving Address Space:
* Using the same IP address across multiple PEs conserves address space because only one IP address is needed for the gateway function, regardless of the number of PEs. The shared MAC address ensures that ARP resolution and forwarding behavior are consistent across all the PEs.
Conclusion:
* Option C:Correct-Using IRB interfaces with the same IP and MAC address across all PEs satisfies the need for redundancy while conserving address space.
OptionsA, B,andDintroduce unnecessary complexity or do not fully utilize the efficient Anycast Gateway approach, which is best practice for conserving IP space and providing redundancy.
NEW QUESTION # 35
You are using E8GP peering in an underlay IP fabric. Which two statements are correct in this scenario?
(Choose two.)
Answer: A,C
Explanation:
* Understanding EBGP in an IP Fabric:
* EBGP (External Border Gateway Protocol) is commonly used in IP fabrics to establish peering between routers, such as leaf and spine nodes, without relying on an Interior Gateway Protocol (IGP) like OSPF or IS-IS.
* IGP Requirement for EBGP:
* Option B:EBGP peering does not require an IGP for adjacency establishment. This is because EBGP peers are typically directly connected, and BGP establishes its own sessions without needing an underlying IGP.
* Leaf-to-Spine Peering:
* Option C:In a typical IP fabric, each leaf node establishes an EBGP session with every spine node. This ensures full connectivity between leaves and spines, facilitating efficient routing and forwarding within the fabric.
Conclusion:
* Option B:Correct-EBGP does not require an IGP for establishing peering sessions.
* Option C:Correct-Each leaf node peers with every spine node, which is a standard practice in IP fabrics to ensure connectivity and redundancy.
NEW QUESTION # 36
......
Our reliable JN0-683 question dumps are developed by our experts who have rich experience in the fields. Constant updating of the JN0-683 prep guide keeps the high accuracy of exam questions thus will help you get use the JN0-683 Exam quickly. During the exam, you would be familiar with the questions, which you have practiced in our JN0-683 question dumps. Thatโs the reason why most of our customers always pass exam easily.
JN0-683 Test Questions Vce: https://www.newpassleader.com/Juniper/JN0-683-exam-preparation-materials.html
P.S. Free 2026 Juniper JN0-683 dumps are available on Google Drive shared by NewPassLeader: https://drive.google.com/open?id=1q3lfILetNvkec_98zuk1NUFCX6iPaiVZ