It is difficult to get the H19-404_V1.0 certification for you need have extremely high concentration to have all test sites in mind. Our H19-404_V1.0 learning questions can successfully solve this question for the content are exactly close to the changes of the real exam. When you grasp the key points, nothing will be difficult for you anymore. Our professional experts are good at compiling the H19-404_V1.0 training guide with the most important information. Believe in us, and your success is 100% guaranteed!
| Section | Objectives |
|---|---|
| WLAN Planning and Design | - Wireless coverage planning - Capacity and performance design considerations |
| Switching and Routing in Campus Networks | - Layer 2 and Layer 3 design principles - VLAN and segmentation design |
| Huawei Campus Network Solutions | - iMaster NCE-Campus management platform - CloudCampus solution architecture |
| Network Security Design | - Campus security architecture considerations - Access control strategies |
| Presales Solution Design | - Customer requirement analysis - Solution proposal and design methodology |
| Campus Network Fundamentals | - Typical campus network deployment models - Enterprise campus network architecture principles |
>> Latest H19-404_V1.0 Test Pdf <<
We promise you that if you fail to pass the exam in your first attempt after using H19-404_V1.0 training materials of us, we will give you full refund. And we are also pass guarantee and money back guarantee. In addition, H19-404_V1.0 exam dumps are edited by skilled experts, and they are quite familiar with the exam center, therefore, if you choose us, you can know the latest information for the exam timely. We provide you with free update for 365 days for H19-404_V1.0 Exam Training materials and the update version will be sent to your email address automatically.
NEW QUESTION # 56
Which of the following statements is true about MACsec?
Answer: A
Explanation:
Hardware-based encryption is the unambiguously correct statement. MACsec protects Ethernet frames at Layer 2 using AES-GCM-based authenticated encryption. On enterprise switches and routers, the encryption and integrity operations are commonly implemented in forwarding ASICs or dedicated hardware so that frames can be protected at high throughput with low latency.
Option A is incorrect because complex manual configuration is not an inherent requirement. MACsec can use manually configured connectivity-association keys, but IEEE 802.1X MACsec Key Agreement can automate peer authentication, secure-channel establishment, key distribution, and rekeying. The operational complexity therefore depends on the deployment model and management platform.
Option C is also inaccurate. MACsec is media-independent, meaning it can operate over supported copper or fiber Ethernet; however, it does not eliminate the requirement for appropriate Layer 2 connectivity between participating MACsec entities. Standard hop-by-hop MACsec protects Ethernet links or LAN connectivity between peers and is not a general Layer 3 tunneling mechanism.
MACsec supplies Layer 2 confidentiality, integrity, origin authentication, and replay protection. Its encryption can be performed directly in network-device hardware, enabling substantially better forwarding performance than software-only encryption implementations.
NEW QUESTION # 57
Which of the following encryption algorithms is used by WPA3?
Answer: D
Explanation:
The intended answer is AES-256. In certification material, this question normally refers to the enhanced WPA3-Enterprise 192-bit security suite, which uses the GCMP-256 data-protection algorithm based on AES-
256, together with stronger integrity and key-management components. AES-512 is not a standardized AES variant, and RC4 is the obsolete stream cipher associated with legacy WEP and TKIP-era protection rather than WPA3.
There is an important technical qualification: WPA3 is a family of certification modes, not one universal cipher suite. WPA3-Personal commonly uses Simultaneous Authentication of Equals for password- authenticated key establishment and requires CCMP-128, which is based on AES-128. WPA3-Enterprise 192- bit mode, however, uses AES-256 in GCM mode. Therefore, the original wording is broader than it should be.
A technically precise version would ask which algorithm is associated with the WPA3-Enterprise 192-bit security suite. Under the intended Huawei examination scope and the supplied single-choice options, option B is correct. That distinction is crucial when interpreting this simplified examination item.
NEW QUESTION # 58
On a campus fabric network, which of the following methods can be used for non-authenticated terminals to access a VN?
Answer: D
Explanation:
Non-authenticated terminals can access a virtual network by using statically configured VLANs. Such terminals may include printers, cameras, sensors, industrial devices, and other dumb terminals that cannot perform 802.1X, Portal, or comparable interactive authentication. Their access interfaces and service VLANs are therefore configured in advance and mapped to the required VN.
Dynamic VLAN authorization requires a completed authentication or identification process. Normally, an authentication server returns a VLAN or other authorization attribute after validating the user or terminal.
Because the question specifically refers to non-authenticated terminals, dynamically authorizing a VLAN is not the applicable mechanism. The wired-mode and wireless-mode authorization options are likewise associated with authentication-based policy delivery rather than unconditional VN access.
Huawei's VN design guidance states that LAN-side physical interfaces and VLANs are assigned to the appropriate departments or services and then associated with corresponding VRFs or VNs. It also explains that a department may use an independent physical interface or share an interface while maintaining isolation through VLANs. Therefore, configuring a static VLAN is the correct method.
NEW QUESTION # 59
What is the function of the PROFINET DCP?
Answer: A
Explanation:
PROFINET DCP, meaning Discovery and Basic Configuration Protocol, is used during device discovery and initial network configuration. It operates at the data-link layer and enables an engineering station or PROFINET IO controller to locate devices on the local Ethernet segment, identify them by MAC address or station name, assign a PROFINET device name, and configure IP parameters such as the IP address, subnet mask, and default gateway.
DCP is therefore not responsible for normal cyclic process-data exchange. Real-time PROFINET communication performs that function after the controller and I/O device have been configured and an application relationship has been established. Alarm exchange and acyclic parameterization are also handled through other PROFINET communication relationships and services.
The distinction matters during commissioning. A new I/O device may initially have no usable IP configuration. DCP allows the controller or engineering tool to discover it at Layer 2 and provision the identity and addressing information required before higher-layer communication can begin. PROFINET documentation identifies DCP as mandatory for assigning IP addresses and configuring station names on the local network.
NEW QUESTION # 60
Which of the following deployment modes are supported by APs?
Answer: A,C,D
Explanation:
APs support barcode scanning through the CloudCampus APP, DHCP Option 148-based deployment, and deployment through Huawei's registration query center. With barcode scanning, the installer scans the AP's label using the CloudCampus APP. The application obtains information such as the electronic serial number and MAC address, associates the AP with the correct tenant and site, and allows the AP to register with iMaster NCE.
With DHCP Option 148, the DHCP server supplies the AP with its IP configuration and the IP address and port number of iMaster NCE. The AP changes to cloud-management mode and automatically initiates registration. Huawei lists AR routers, switches, and APs as supported devices for this mode.
The registration query center can also provide the controller address after the AP contacts Huawei's query service. It supports APs together with ARs, firewalls, and switches. Email-based deployment is primarily an SD-WAN CPE or AR-router ZTP method, not an AP deployment mode. Therefore, A, C, and D are correct.
NEW QUESTION # 61
......
Nowadays the test H19-404_V1.0 certificate is more and more important because if you pass H19-404_V1.0 exam you will improve your abilities and your stocks of knowledge in some certain area and find a good job with high pay. If you buy our H19-404_V1.0 exam materials you can pass the H19-404_V1.0 Exam easily and successfully. We have data proved that our H19-404_V1.0 exam material has the high pass rate of 99% to 100%, if you study with our H19-404_V1.0 training questions, you will pass the H19-404_V1.0 exam for sure.
Premium H19-404_V1.0 Exam: https://www.troytecdumps.com/H19-404_V1.0-troytec-exam-dumps.html