Our NSEI_OTS_AR-7.6 exam guide can stand the test of market as well as customers of various needs with passing rate up to 98 to 100 percent, which is a strong proof that attest to their efficacy. OurNSEI_OTS_AR-7.6 practice materials can provide the evidence of your working proficiency, and the high-efficiency of them are provided by our company can effectively advance your pace of making progress and speed up your pace of reviving it. So our NSEI_OTS_AR-7.6 Practice Engine is your ideal choice.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Monitoring and Risk Assessment | 25% | - OT-focused risk assessment and management - Threat detection using FortiSIEM 7.4 - Event handling and logging with FortiAnalyzer 7.6 |
| Topic 2: Asset Management | 25% | - OT security standards and compliance (IEC 62443, NIST) - Fortinet Security Fabric for OT environments - Device detection and inventory using FortiGate & FortiNAC |
| Topic 3: Network Security | 25% | - Virtual patching for legacy OT systems - Security automation and threat response - Deep inspection for industrial protocols (Modbus, DNP3, OPC) |
| Topic 4: Network Access Control | 25% | - Purdue Model and secure network segmentation - OT Ethernet and industrial communication models - Authentication and access policies for OT devices |
>> Certification NSEI_OTS_AR-7.6 Exam Cost <<
Fortinet NSEI_OTS_AR-7.6 dumps may be the best method for candidates who are preparing for their exam and eager to clear exam as soon as possible. People's success lies in their good use of every change to self-improve. Our Fortinet NSEI_OTS_AR-7.6 Dumps will be the best resources for your real test. If you choose our products, we will choose efficient and high-passing preparation materials.
NEW QUESTION # 41
Refer to the exhibits.
A partial Basic Event Handler page on FortiAnalyzer and the creation of a trigger in a FortiGate device are shown. To improve the protection of your OT network, you want to automate the handling of compromised devices notified through FortiAnalyzer. You have configured an event handler named Alert_trigger as shown in the exhibit. When you create the trigger on the FortiGate device, the Event handler name field does not provide the Alert_trigger option. What two actions must you perform to make the Alert_trigger option available? (Choose two answers)
Answer: A,C
Explanation:
The correct answers are C and D .
Option C is correct because the study guide explains that when "a handler generates an event with the automation stitch option enabled, FortiAnalyzer sends a notification" and, in the Security Fabric workflow, "FortiAnalyzer parses the logs and notifies the root FortiGate." This means FortiGate must first have the FortiAnalyzer connection configured so it can consume FortiAnalyzer event handlers and use them in automation. The wizard message in the exhibit also points to this requirement by indicating that a FortiAnalyzer connection must be configured.
Option D is also correct because the study guide explicitly says that in this automation flow "the root FortiGate triggers the action" and shows "Stitches configured on root FortiGate." Therefore, if you want the FortiAnalyzer event handler to appear and be usable for automation, the trigger must be configured on the root FortiGate , not on an arbitrary downstream FortiGate.
Option A is incorrect because + Create is only a GUI control and does not solve the missing-event-handler visibility problem. Option B is not identified in the study guide as the requirement for making a FortiAnalyzer event handler available in the FortiGate automation trigger list.
NEW QUESTION # 42
Refer to the exhibit.
A partial OT network is shown. You want to provide the supervisor with secure remote access. Which two features can you implement on Edge-FortiGate ? (Choose two answers)
Answer: C,D
Explanation:
Based on the exhibit and the OT Security 7.6 Architect standards for Secure Remote Access :
* Secure Tunneling (Statement A) : The exhibit shows a Remote PC connecting through a VPN Cloud to the Edge-FortiGate . In the Fortinet architecture, IPsec VPN is the primary method for establishing a secure, encrypted tunnel for remote administrators or supervisors to access the internal OT segments (Level 2/3) from an external location.
* Multi-Factor Authentication (Statement B) : Secure remote access in OT environments (aligned with IEC 62443 standards) requires strong authentication. The study guide emphasizes the use of FortiToken to provide Two-Factor Authentication (2FA) for VPN users, ensuring that compromised credentials alone are not enough to gain access to critical infrastructure.
* FSSO (Statement D) : Fortinet Single Sign-On is generally used for identifying internal users already on the network to apply identity-based policies; it is not the primary mechanism for establishing the remote connection itself.
* SD-WAN (Statement C) : While SD-WAN can manage the path of the VPN traffic, it is a WAN optimization and reliability feature, not a " secure remote access " feature for a supervisor in the context of authentication and encryption.
NEW QUESTION # 43
According to the IEC 62443 standard, your security level is 4 . What is your OT environment defending against? (Choose one answer)
Answer: D
Explanation:
Explanation:
NEW QUESTION # 44
Refer to the exhibit.
A firewall policy page is shown. To improve the security of your OT network, you have configured a Supervisor profile in the firewall policies, as shown in the exhibit. However, a supervisor is reporting that he cannot ping PLC-1. What are the two reasons? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are A and C .
Option A is correct because the study guide explains that with active authentication , FortiGate prompts the user only when they use "an acceptable login protocol." It states: "When you use only active authentication, if all possible policies that could match the source IP address have authentication enabled, then the user will receive a login prompt (assuming they use an acceptable login protocol)." A direct ping to PLC-1 uses ICMP , which is not the kind of login protocol used to trigger user authentication.
So the supervisor must first authenticate through a protocol such as HTTPS or Telnet , then the ICMP traffic can match the authenticated policy.
Option C is also correct because the exhibit shows policy ID 8 greyed out, meaning it is not enabled. That policy appears above the Supervisor_access (9) policy and allows broader access to PLC-1 , whereas policy 9 is limited to ALL_ICMP . The study guide explains that "Because the user has not yet authenticated, the user group aspect of the traffic does not match" and FortiGate continues searching for another complete match. In this case, with policy 8 disabled, the supervisor is left with only the ICMP rule, which cannot be used to perform the initial login step needed for active authentication.
Option B is not supported by the exhibit. Option D is incorrect because auth-on-demand always would force authentication prompts more aggressively, but the core problem here is that the user is trying to start with ICMP and the broader policy that could permit the initial authenticated access is disabled.
NEW QUESTION # 45
Refer to the exhibit.
A basic event handler is shown. You have enabled Automation Stitch to automate the handling of an alert.
Which two steps must you take to use this automation stitch? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are C and D .
Option D is correct because the study guide states that the configuration of an event handler can include
"Rules" and explains that "Rules are granular conditions" and "Event handlers can have one or more rules." It further states that "FortiAnalyzer uses event handlers to filter all incoming logs" and "If logs match the conditions configured in an event handler, FortiAnalyzer generates an event." Therefore, to use the automation stitch, you must define the rules on FortiAnalyzer so the event handler can actually generate the event that starts the automation flow.
Option C is also correct. The study guide explains that "When a handler generates an event with the automation stitch option enabled, FortiAnalyzer sends a notification" to the FortiGate side, and in the attack-detection example it says "FortiAnalyzer parses the logs and notifies the root FortiGate" and then
"The root FortiGate triggers the action." It also explicitly shows "Stitches configured on root FortiGate." This means the FortiGate must have the corresponding automation trigger configured for the FortiAnalyzer event handler notification.
Option A is incorrect because the study guide does not describe configuring an Action on FortiAnalyzer as the required step for this FortiAnalyzer-to-FortiGate automation-stitch flow. Option B is also incorrect because playbooks are a different FortiAnalyzer automation mechanism; the question specifically refers to using the Automation Stitch option in the event handler.
NEW QUESTION # 46
......
We give priority to the user experiences and the clients’ feedback, NSEI_OTS_AR-7.6 practice guide will constantly improve our service and update the version to bring more conveniences to the clients and make them be satisfied. The clients’ satisfaction degrees about our NSEI_OTS_AR-7.6 training materials are our motive force source to keep forging ahead. Now you can have an understanding of our NSEI_OTS_AR-7.6 Guide materials. Every subtle change in the mainstream of the knowledge about the NSEI_OTS_AR-7.6 certification will be caught and we try our best to search the NSEI_OTS_AR-7.6 study materials resources available to us.
NSEI_OTS_AR-7.6 Valid Exam Simulator: https://www.lead2passexam.com/Fortinet/valid-NSEI_OTS_AR-7.6-exam-dumps.html