Ciscoの300-110試験のために不安なのですか。弊社のソフトは買うたるかどうかまだ疑問がありますか。そうであれば、無料で弊社の提供するCiscoの300-110のデモをダウンロードしてみよう。我々提供する資料はあなたの需要だと知られています。あなたのCiscoの300-110試験に参加する圧力を減ってあなたの効率を高めるのは我々の使命だと思います。
| Section | Weight | Objectives |
|---|---|---|
| Wireless Site Survey | 25% | - Material attenuation and its design effects - Collect design requirements and evaluate constraints - Predictive site survey - Planning tools and network metrics evaluation - Pre-deployment site survey - Post-deployment site survey - Layer 1 site survey analysis |
| WLAN High Availability | 20% | - Design controller high availability - Design AP high availability |
| Wired and Wireless Infrastructure | 30% | - Design wireless bridging (mesh) - Design radio management - Physical infrastructure requirements - Design for data, voice, video, location - Design high-density wireless networks - Logical infrastructure requirements |
| Mobility | 25% | - Site Tags - Validate mobility tunneling - Design mobility groups - Optimize client roaming |
社会の発展と相対的な法律と規制の完成により、私たちのキャリア分野での300-110証明書は、私たちの国にとって必要になります。 300-110に合格して証明書を取得することが、あなたの立場を変えて目標を達成するための最も迅速で直接的な方法かもしれません。そして、300-110試験に合格するためのお手伝いをいたします。このキャリアで最も本物のブランドと見なされているプロの専門家は、お客様に最新の有効な300-110試験シミュレーションを提供するために絶え間ない努力を行っています
質問 # 112
An engineer in a branch office that does not have a wired backhaul must ensure that local clients can be switched locally and authenticated centrally. In which mode must the AP be configured?
正解：B
解説：
Flex+Bridge mode is a specialized AP operating mode that combines two distinct Cisco wireless capabilities: FlexConnect (for local switching of client data traffic and central authentication via the WLC) and Bridge/Mesh mode (enabling wireless backhaul when no wired Ethernet uplink is available). In a branch environment without wired backhaul, a standard FlexConnect AP (Option D) cannot operate because FlexConnect still requires an Ethernet connection for its control plane.
Bridge mode alone provides mesh backhaul but does not support the local switching with central authentication model required here. MAP (Option A) is a Mesh Access Point role for wireless backhaul, and RAP (Option C) is a Root Access Point with a wired connection -- neither meets the no-wired-backhaul requirement with local switching. Flex+Bridge uniquely satisfies both requirements: the Flex component allows locally switched VLANs to be bridged directly to the access layer without traversing the WAN, while the Bridge component enables the AP to use a wireless mesh link for its backhaul uplink. Central authentication is maintained via the CAPWAP control tunnel over the mesh link.
質問 # 113
In an N+1 design, a customer needs certain APs in the emergency department to rejoin the backup controller before all other APs when a failover occurs. Which feature must the engineer include in the design?
正解：D
解説：
AP failover priority allows an engineer to assign each AP a priority level of low, medium, high, or critical. When a backup controller in an N+1 design receives more join requests than its licensed AP capacity allows, it uses these priority values to decide which APs to accept. If the controller is already at capacity and a higher-priority AP requests to join, the controller disassociates a lower- priority AP to make room for it. This makes AP failover priority the correct design element when specific coverage areas - such as an emergency department, operating theater, or warehouse safety zone - must be guaranteed service during a controller outage. AP fallback is a different feature that returns an AP to its primary controller once that controller comes back online, and it does not influence which APs are admitted during the failure. Mobility group priority and join profile weighting are not the mechanisms that govern controller admission during failover.
質問 # 114
A customer is planning to replace older access points with Cisco 4800 Series Access Points.
Unaware of the infrastructure requirements, the client has an engineer investigate the inline power requirement. Which IEEE 802.3 standard complies with the Cisco 4800 Series Access Points?
正解：A
解説：
The Cisco Aironet 4800 Series Access Point is a tri-radio, high-performance access point designed for high-density environments. It draws significantly more power than older dual-radio APs and requires IEEE 802.3bt (also known as PoE++), which provides up to 90W per port at the Power Sourcing Equipment. IEEE 802.3af (Type 1 PoE) delivers only 15.4W and 802.3at (Type 2 PoE+) provides up to 30W -- both are insufficient for full functionality of the 4800 series, which has a dedicated third scanning radio that requires the additional power budget provided by
802.3bt. IEEE 802.3ac is a standard related to VLAN tagging and is entirely unrelated to Power over Ethernet. Engineers designing wired infrastructure for Cisco 4800 deployments must ensure switches support 802.3bt Type 3 or Type 4 to guarantee full AP functionality across all three radios simultaneously.
質問 # 115
A wireless engineer is getting ready to perform a predictive site survey. The new network needs to support data and voice over wireless. Which two Cisco recommendations should be considered for the design? (Choose two.)
正解：A、D
解説：
For a network supporting both data and voice over wireless, two key Cisco design recommendations apply. First, the 5 GHz radio band is recommended for voice over wireless due to its wider channel bandwidths, allowing for higher data rates and better quality of service for latency-sensitive applications. 40 MHz channels in the 5 GHz band provide significantly higher throughput than 20 MHz channels in 2.4 GHz, making Option B correct for the bandwidth reason stated. Second, setting the cell boundary to -67 dBm ensures sufficient signal strength for reliable voice communication at the cell edge, which is the Cisco standard threshold for VoWLAN coverage.
質問 # 116
A customer wants a network engineer to design a Cisco wireless solution that will have redundancy through SSO and LAG. APs in the executive office must reassociate to the WLC as soon as possible in the event of a failure. The WLCs are located in a remote data center. The head office uses a WAN for connectivity with the data center. Which priority must be incorporated in the design to be assigned to the executive APs?
正解：B
解説：
Cisco WLC AP Failover Priority governs the order in which APs are processed when a WLC recovers and APs begin re-associating. The priority levels are: Critical, High, Medium, and Low. During recovery situations, the WLC will accept and process AP join requests in order of priority - Critical priority APs are processed first, before all other priority levels. In a deployment where the WLC is located in a remote data center connected via WAN, the join process for all APs is slower due to WAN latency and potential bandwidth constraints. Under these conditions, assigning Critical priority to executive office APs ensures they are at the front of the processing queue and restore service before lower-priority APs. The executive office designation implies business-critical operations requiring the fastest possible wireless restoration - a requirement that directly maps to the Critical priority level. High priority (Option A) would position the executive APs second in the queue behind any Critical priority APs. Medium (Option B) and Low (Option C) would place them further down the processing order. Reference: WLSD Study Guide - AP Failover Priority Configuration, N+1 and SSO Redundancy Design, WAN-Linked Controller Deployments.
質問 # 117
......
GoShikenはもっぱらCiscoプロ300-110認証試験に関する知識を提供するのサイトで、ほかのサイト使った人はGoShikenが最高の知識源サイトと比較しますた。GoShikenの商品はとても頼もしい300-110試験の練習問題と解答は非常に正確でございます。
300-110日本語版受験参考書: https://www.goshiken.com/Cisco/300-110-mondaishu.html