100% Pass-Rate Fresh JN0-364 Dumps Supply you First-Grade Latest Test Discount for JN0-364: Service Provider Routing and Switching, Specialist (JNCIS-SP) to Prepare easily

BTW, DOWNLOAD part of iPassleader JN0-364 dumps from Cloud Storage: https://drive.google.com/open?id=1YpayNPFSTenO5NUsgl8TIg1Puu9K1hFc

If you are preparing for the practice exam, we can make sure that the JN0-364 test practice files from our company will be the best choice for you, and you cannot find the better study materials than our company'. There are a lot of advantages of our JN0-364 preparation materials, and you can free download the demo of our JN0-364 training guide to know the special functions of our JN0-364 prep guide in detail. And you will know the quality of our JN0-364 study prep as well. We are hopeful that you will like our JN0-364 exam questions.

Juniper JN0-364 Exam Syllabus Topics:

SectionObjectives
Topic 1: IPv6- Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6
- Identify the concepts, operation, or functionality of IPv6
  • 1. Static routes
  • 2. IPv6 over IPv4 tunneling
  • 3. Dynamic routing - OSPFv3, IS-IS, BGP
Topic 2: Intermediate System to Intermediate System (IS-IS)- Identify the concepts, operation, or functionality of IS-IS
  • 1. Adjacencies and neighbors
  • 2. Type, length, values (TLVs)
  • 3. IS-IS protocol data units (PDUs)
  • 4. Link-state database
  • 5. Designated intermediate system (DIS)
  • 6. Metrics
  • 7. Levels and areas
- Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS
  • 1. Routing policy application
  • 2. Troubleshooting tools
  • 3. Interfaces and adjacencies
Topic 3: Layer 2 Bridging or VLANs- Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS
  • 1. Service provider switching platforms
  • 2. Frame processing
  • 3. Bridging elements and terminology
  • 4. Virtual Switches
  • 5. Provider bridging (Q-in-Q tunneling)
- Identify the concepts, benefits, or functionality of VLANs
  • 1. Tagging
  • 2. Port modes
  • 3. Integrated Routing and Bridging (IRB)
- Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs
  • 1. Provider bridging
  • 2. IRB
  • 3. Interfaces and ports
  • 4. VLANs
Topic 4: Spanning Tree Protocols- Demonstrate knowledge of how to configure, monitor, or troubleshoot Spanning Tree Protocols
  • 1. MSTP
  • 2. RSTP
  • 3. VSTP
  • 4. STP
- Identify the concepts, operation, or functionality of STP
  • 1. MSTP
  • 2. RSTP
  • 3. VSTP
  • 4. STP
Topic 5: Protocol-Independent Routing- Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components
  • 1. Static, aggregate, and generated routes
  • 2. Load balancing
  • 3. Filter-based forwarding
- Identify the concepts, operation, or functionality of various protocol-independent routing components
  • 1. Martian addresses
  • 2. Static, aggregate, and generated routes
  • 3. Load balancing
  • 4. Filter-based forwarding
  • 5. Routing instances, including routing information base (RIB) (also known as routing table) group
Topic 6: Multiprotocol Label Switching (MPLS)- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
  • 1. Shortest path segment-routing LSPs
  • 2. LDP-signaled Label-Switched Paths (LSPs)
  • 3. RSVP-signaled Label-Switched Paths (LSPs)
  • 4. MPLS forwarding
- Identify the concepts, operation, or functionality of MPLS CoS processing on Junos devices
  • 1. Segment routing with MPLS
  • 2. End-to-end packet flow and forwarding
  • 3. Labels and the label information base
  • 4. LDP
  • 5. RSVP
  • 6. MPLS and routing tables
  • 7. MPLS packet header
  • 8. MPLS terminology
Topic 7: Border Gateway Protocol (BGP)- Identify the concepts, operation, or functionality of BGP
  • 1. Attributes
  • 2. BGP basic operation
  • 3. BGP route reflection and confederations
  • 4. IBGP and EBGP functionality and interaction
  • 5. Route selection process
  • 6. BGP message types
- Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP
  • 1. Routing policy application
  • 2. Troubleshooting tools
  • 3. Peers and peer groups
Topic 8: Open Shortest Path First (OSPF)- Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF
  • 1. Routing policy application
  • 2. Troubleshooting tools
  • 3. Interfaces and neighbor
- Identify the concepts, operation, or functionality of OSPF
  • 1. OSPF area and router types
  • 2. Link-state advertisement (LSA) packet type
  • 3. OSPF packet types
  • 4. Adjacencies and neighbors
  • 5. Router ID
  • 6. Link-state database
  • 7. Designated router and backup designated router

>> Fresh JN0-364 Dumps <<

Latest Test JN0-364 Discount, Regualer JN0-364 Update

If you failed to do so then the customer gets a full refund from iPassleader according to the terms and conditions. Users can start using Juniper JN0-364 instantly after purchasing it. Three JN0-364 Exam Questions format is provided to customers so that they can access the Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) prep material in every possible way according to their needs.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q170-Q175):

NEW QUESTION # 170
Which IS-IS adjacency state indicates that hello packets have been exchanged but the adjacency is not yet fully established?

Answer: D

Explanation:
The initializing state indicates that IS-IS hello packets have been exchanged between neighbors and the routers have detected each other, but the adjacency has not yet progressed to the fully established state where databases are synchronized.


NEW QUESTION # 171
You are evaluating BGP between two Juniper routers and the BGP session is stuck in the Idle state. What would cause this behavior?

Answer: C

Explanation:
In the BGP Finite State Machine (FSM), theIdlestate is the first stage of any BGP connection. When a BGP session is "stuck" in Idle, it typically indicates that the router is unable to even begin the process of establishing a TCP connection with its neighbor. According to Juniper Networks documentation, before BGP can transition to theConnectorActivestates, it must have a valid route to the neighbor's IP address in the routing table and be able to initiate a three-way TCP handshake on port 179.
If thepeer IP address is incorrect(Option D), the router may not have a route to that destination, or it may be attempting to connect to a non-existent or unreachable host. In many Junos configurations, if the underlying IGP (OSPF/IS-IS) or static routing cannot provide reachability to the neighbor address defined in the BGP configuration, the BGP process will remain in the Idle state and periodically retry the connection.
Regarding the other options:
* The local AS number is missing (Option C):In Junos, you cannot commit a BGP configuration if the local autonomous system is not defined at either the [edit routing-options] level or within the BGP group itself. The commit check would fail before the session could even attempt to start.
* The BGP group type (Option B):Having a mismatch in group type (internal vs. external) usually results in the session reaching theOpenSentorOpenConfirmstate before failing due to an
"unacceptable AS" error in the OPEN message.
* BGP hold time (Option A):Issues with hold timers or keepalives generally cause a session that is already in theEstablishedstate to drop; they do not prevent the session from leaving the Idle state.


NEW QUESTION # 172
Referring to the exhibit, which two statements are correct? (Choose two.)

Answer: C,D

Explanation:
Local preference is a BGP attribute that dictates which path is preferred when multiple paths to the same destination are available. A higher local preference is preferred over a lower one. Since ISP A (AS 65501) is advertising a local preference of 100 and ISP B (AS 65502) is advertising a local preference of 200 to AS 65512, traffic from devices in AS 65512 will prefer the path via ISP B for all networks that ISP B advertises. However, since ISP A advertises the 172.20.21.0/24 network and ISP B does not, traffic for 172.20.21.0/24 will go through ISP A. For the
172.20.0.0/24 network, which both ISPs advertise, devices in AS 65512 will prefer the path via ISP B due to the higher local preference.


NEW QUESTION # 173
Click the Exhibit button. Referring to the exhibit, R1 is advertising prefix 203.0.113.0/24 to R2 over EBGP. R2 is configured to advertise this prefix into IBGP. R3 receives the 203.0.113.0/24 route, however the route is hidden.
Which configuration statement do you need to add to R2 to solve this problem?

Answer: D

Explanation:
R2 is advertising the EBGP-learned route into iBGP without changing the next-hop, so R3 receives the route with a next-hop of 172.16.10.1 (R1). Because that next-hop is not reachable from R3, Junos marks the route as hidden. Setting next-hop self on R2 makes the next-hop reachable (R2), so the route becomes usable on R3.


NEW QUESTION # 174
Which two events cause a static route to be removed from a routing table? (Choose two.)

Answer: B,C

Explanation:
If the outbound interface associated with a static route becomes unavailable, the router removes the route from the routing table because the next-hop path is no longer reachable.
A static route is also removed when it is manually deleted from the configuration, after which the router withdraws it from the routing table.


NEW QUESTION # 175
......

The receptiveness of three novel relationships for Juniper JN0-364 exam licenses clients to rehearse themselves in various conditions. Free demos are accessible for download to look at in work areas for Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Exam. Juniper JN0-364 Dumps awards you the whole day, constant client affiliation, and 365 days of free updates.

Latest Test JN0-364 Discount: https://www.ipassleader.com/Juniper/JN0-364-practice-exam-dumps.html

BONUS!!! Download part of iPassleader JN0-364 dumps for free: https://drive.google.com/open?id=1YpayNPFSTenO5NUsgl8TIg1Puu9K1hFc