What's more, part of that Exams-boost H35-580_V2.0 dumps now are free: https://drive.google.com/open?id=13oYJdheq-lqAslIhfOuG6OWuM-Jrx3kg
We provide top quality verified Huawei certifications preparation material for all the H35-580_V2.0 exams. Our H35-580_V2.0 certified experts have curated questions and answers that will be asked in the real exam, and we provide money back guarantee on Exams-boost Huawei preparation material. Moreover, we also offer H35-580_V2.0 practice software that will help you assess your skills before real H35-580_V2.0 exams. Here is exclusive Huawei bundle deal, you can get all H35-580_V2.0 exam brain dumps now at discounted price.
| Section | Weight | Objectives |
|---|---|---|
| Fundamentals of 5G Network Optimization | 30% | - Network Optimization Process and Methods - Interference Optimization - Capacity and Throughput Optimization - Performance Monitoring and Evaluation Indicators - Coverage Optimization - Mobility Optimization |
| 5G Wireless Network Principles | 20% | - 5G NR Channels and Signals - 5G NR Mobility and Power Control - 5G NR Frame Structure and Physical Resources - 5G NR Overview and Key Technologies |
| 5G Base Station Overview and Basic Operations | 10% | - 5G Base Station Products and Hardware Composition - 5G Base Station Installation and Deployment - 5G Base Station Configuration and Commissioning - 5G Base Station Maintenance and Fault Handling |
| Basic Features of 5G Wireless Networks | 20% | - Beam Management and Optimization - 5G QoS and Slicing - Massive MIMO Technology - Flexible Duplex and Spectrum Sharing |
| Fundamentals of 5G Network Planning | 20% | - Capacity and Interference Planning - Wireless Environment Analysis and Coverage Planning - Site Survey and Design - 5G Network Planning Process and Principles - Parameter Planning and Configuration |
>> Exam Dumps H35-580_V2.0 Zip <<
Our Exams-boost is the most reliable backing for every H35-580_V2.0 candidate. All study materials required in H35-580_V2.0 exam are provided by Our Exams-boost. Once you purchased our H35-580_V2.0 exam dump, we will try our best to help you Pass H35-580_V2.0 Exam. Additionally, our excellent after sales service contains one-year free update service and the guarantee of dump cost full refund if you fail the exam with our dump.
NEW QUESTION # 15
The UPEU in the BBU5900 needs to be connected to two circuit breakers.
Answer: B
Explanation:
Explanation
According to the BBU Quick Installation Guide (V100R005C10_04) (PDF)-EN, the UPEU in the BBU5900 needs to be connected to only one circuit breaker, not two. The UPEU is a universal power and environment interface unit that provides power supply and environment monitoring functions for other boards in a subrack.
The UPEU converts -48 V DC to +12 V DC and distributes the power to other boards. The UPEU also collects alarms from the subrack and reports them to the main processing board. The UPEU can be installed in slot 0 or slot 10 of the BBU5900 subrack. The UPEU needs to be connected to a -48 V DC power cable that is connected to a circuit breaker in the cabinet. The circuit breaker must have a rated current of 16 A or higher.
Therefore, the correct answer is B.
NEW QUESTION # 16
In SA networking, which of the following is the first step for a UE to perform a cell search?
Answer: C
Explanation:
Explanation
According to the 5G SA Cell Search & Network Entry Matrix, the first step for a UE to perform a cell search in SA networking is to synchronize frames and obtain PCI group number. This step involves the following sub-steps:
The UE scans the available frequency range to detect the presence of Synchronization Signal Blocks (SSBs) from different base stations. SSBs are periodic signals that contain essential synchronization and system information for cell search and initial access.
The UE selects an SSB with the strongest signal strength and decodes its Primary Synchronization Signal (PSS) and Secondary Synchronization Signal (SSS). The PSS and SSS are part of the SSB and provide coarse timing synchronization and cell identity information.
The UE uses the PSS and SSS information to synchronize its internal clock with that of the base station and obtain the Physical Cell Identity (PCI) group number. The PCI group number is a 9-bit value that identifies a group of 8 cells that share the same PSS and SSS sequences. The PCI group number ranges from 0 to 1007.
The other steps for a UE to perform a cell search in SA networking are:
Synchronize half-frames and obtain the ID within a PCI group: The UE further synchronizes its timing with the base station by decoding its Narrowband Synchronization Signal (NSSS), which is also part of the SSB. The NSSS provides more precise timing information and the ID within a PCI group, which is a
3-bit value that identifies a specific cell within a PCI group. The ID within a PCI group ranges from 0 to
7. By combining the PCI group number and the ID within a PCI group, the UE can obtain the full PCI, which is a 10-bit value that uniquely identifies a cell.
Obtain other cell information: The UE decodes other signals and channels in the SSB to acquire other cell information, such as system bandwidth, subcarrier spacing, frame structure, etc. These signals and channels include Demodulation Reference Signals (DMRS), Master Information Block (MIB), System Information Block (SIB), etc.
Obtain the cell signal quality: The UE measures the cell signal quality based on various indicators, such as Reference Signal Received Power (RSRP), Reference Signal Received Quality (RSRQ), Signal-to-Interference-plus-Noise Ratio (SINR), etc. These indicators reflect the strength, quality, and interference level of the received signal.
NEW QUESTION # 17
Among the A3 event parameters for intra-frequency handover, which of the following parameters cannot be configured individually based on QCI?
Answer: D
Explanation:
CIO is configured per neighbor relation and is not typically differentiated according to QCI.
NEW QUESTION # 18
During the downlink MCS adjustment process, the base station makes the adjustment based on which of the following measurements?
Answer: B
Explanation:
Link adaptation aims to maintain a target BLER. Therefore, MCS adjustments are primarily based on the observed PDSCH BLER performance.
NEW QUESTION # 19
If the MeasAndMobParametersMRDC of the terminal MR-DC capability contains the independentGapConfig information element, which GAP configuration is recommended for NR inter-frequency measurement?
Answer: D
Explanation:
When the UE supports independentGapConfig, Per UE GAP is the recommended configuration because it provides flexible measurement gap management across radio technologies.
NEW QUESTION # 20
......
Business Applications H35-580_V2.0 certification exam with our braindumps, just send us your failed score report. After we confirm your H35-580_V2.0 score report and we can give full refund of the H35-580_V2.0 Exam to you in time. Meanwhile, if you also need to take other related exams you also can choose another exam instead of the failed exam.
H35-580_V2.0 100% Accuracy: https://www.exams-boost.com/H35-580_V2.0-valid-materials.html
P.S. Free 2026 Huawei H35-580_V2.0 dumps are available on Google Drive shared by Exams-boost: https://drive.google.com/open?id=13oYJdheq-lqAslIhfOuG6OWuM-Jrx3kg