As long as you need the exam, we can update the Fortinet certification NSEI_OTS_AR-7.6 exam training materials to meet your examination needs. TorrentValid's training materials contain many practice questions and answers about Fortinet NSEI_OTS_AR-7.6 and they can 100% ensure you pass Fortinet NSEI_OTS_AR-7.6 exam. With the training materials we provide, you can take a better preparation for the exam. And we will also provide you a year free update service.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Network Security | 25% | - Security automation and threat response - Virtual patching for legacy OT systems - Deep inspection for industrial protocols (Modbus, DNP3, OPC) |
| Topic 2: Monitoring and Risk Assessment | 25% | - OT-focused risk assessment and management - Threat detection using FortiSIEM 7.4 - Event handling and logging with FortiAnalyzer 7.6 |
| Topic 3: Asset Management | 25% | - Fortinet Security Fabric for OT environments - Device detection and inventory using FortiGate & FortiNAC - OT security standards and compliance (IEC 62443, NIST) |
| Topic 4: Network Access Control | 25% | - Authentication and access policies for OT devices - OT Ethernet and industrial communication models - Purdue Model and secure network segmentation |
>> Instant Fortinet NSEI_OTS_AR-7.6 Download <<
Our website provides the most up to date and accurate Fortinet NSEI_OTS_AR-7.6 learning materials which are the best for clearing NSEI_OTS_AR-7.6 real exam. It is best choice to accelerate your career as a professional in the information technology industry. We are proud of our reputation of helping people clear NSEI_OTS_AR-7.6 Actual Test in your first attempt. Our pass rate reached almost 86% in recent years.
NEW QUESTION # 51
How are rogue devices evaluated in FortiNAC? (Choose one answer)
Answer: D
Explanation:
The correct answer is A. Through device profiling rules . The study guide states: "When a rogue device record is created, the device is evaluated against the enabled device profiling rules." It further explains that "FortiNAC evaluates a device against each rule until a failed, passed, or cannot evaluate result is reached." That is the direct evaluation mechanism used for rogue devices in FortiNAC.
The guide also adds that "Device profiling rules are used to evaluate and classify rogue devices" and that FortiNAC applies rule methods and classification settings to determine whether the device matches a known type. This is why the other options are incorrect: FortiGuard server queries and the local device database (CIDB) relate to FortiGate device detection workflows, not FortiNAC rogue-device evaluation, and importing a devices list is not the evaluation method described for rogue devices.
NEW QUESTION # 52
Refer to the exhibit.
Which statement about this partial Asset Identity List page is correct? (Choose one answer)
Answer: A
Explanation:
The correct answer is B. A firewall policy has a Virtual Patching security profile applied to it .
The decisive clue in the exhibit is the Vulnerabilities column showing KEVs and device-specific vulnerability counts. The study guide explains the virtual patching workflow in this exact way: "FortiGate performs a lookup for device-specific vulnerabilities and mitigation rules in FortiGuard," then
"FortiGuard returns specific OT virtual patching signatures," and "FortiGate caches the signatures and mitigation rules that apply to each device." That is the same behavior reflected by the Asset Identity List showing vulnerability information per detected device.
The guide then states that "When traffic related to the vulnerable device reaches FortiGate, the firewall policy with the virtual patching profile applies." It also says "A virtual patching profile can be applied to firewall policies in any direction, protecting traffic from or to the vulnerable OT device." This directly links the per-device vulnerability visibility to a Virtual Patching profile enforced through firewall policy.
The other options do not match the exhibit. Antivirus is not described in the study guide as building a device- by-device vulnerability list, Application Control is used for OT protocol and message visibility, and IPS focuses on exploit detection and prevention. The Vulnerabilities/KEVs display is the indicator that FortiGate is using Virtual Patching logic for those OT devices.
NEW QUESTION # 53
Refer to the exhibit.
A firewall policy page is shown. To improve the security of your OT network, you have configured a Supervisor profile in the firewall policies, as shown in the exhibit. However, a supervisor is reporting that he cannot ping PLC-1. What are the two reasons? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are A and C .
Option A is correct because the study guide explains that with active authentication , FortiGate prompts the user only when they use "an acceptable login protocol." It states: "When you use only active authentication, if all possible policies that could match the source IP address have authentication enabled, then the user will receive a login prompt (assuming they use an acceptable login protocol)." A direct ping to PLC-1 uses ICMP , which is not the kind of login protocol used to trigger user authentication.
So the supervisor must first authenticate through a protocol such as HTTPS or Telnet , then the ICMP traffic can match the authenticated policy.
Option C is also correct because the exhibit shows policy ID 8 greyed out, meaning it is not enabled. That policy appears above the Supervisor_access (9) policy and allows broader access to PLC-1 , whereas policy 9 is limited to ALL_ICMP . The study guide explains that "Because the user has not yet authenticated, the user group aspect of the traffic does not match" and FortiGate continues searching for another complete match. In this case, with policy 8 disabled, the supervisor is left with only the ICMP rule, which cannot be used to perform the initial login step needed for active authentication.
Option B is not supported by the exhibit. Option D is incorrect because auth-on-demand always would force authentication prompts more aggressively, but the core problem here is that the user is trying to start with ICMP and the broader policy that could permit the initial authenticated access is disabled.
NEW QUESTION # 54
Refer to the exhibits.
A partial Incident Analysis page and the log details related to the event are shown. An attack is reported on your OT network. You analyze the corresponding incident. Based on the information provided on the Incident Analysis page and the log details, which two statements are correct? (Choose two answers)
Answer: C,D
Explanation:
Based on the technical data provided in the exhibits and the OT Security 7.6 Architect curriculum:
* Industrial Protocol Identification (Statement A) : The log details exhibit clearly shows that the Destination Port used in the attack is 502 . According to the study guide ' s section on Industrial Protocol Protection , the standard port used by the Modbus TCP protocol is 502 . Furthermore, the attack name identifies a " Triangle.Research.Nano-10.PLC, " which are industrial controllers commonly utilizing Modbus for communications.
* Attack Mitigation (Statement B) : The log details specify that the Action taken by the FortiGate (Edge-FortiGate) was dropped . In cybersecurity and Fortinet fabric operations, dropping a packet associated with an IPS signature means the traffic was blocked from reaching its target, thereby mitigating the attack.
* Target IP Address (Statement E) : The log detail explicitly lists the Destination IP as 192.168.2.3 .
The Incident Analysis page also titles the incident with dstip:192.168.2.3. While the " Affected Endpoint " is shown as 10.1.5.20 , in an " outgoing " attack direction (as shown in the log), this likely refers to the internal source/attacker IP, whereas the target is the destination IP (192.168.2.3). Thus, Statement E is incorrect.
* Protocol Conflict (Statement C) : The IEC 104 protocol typically utilizes port 2404 . Since the log specifies port 502, Statement C is incorrect.
* Severity Distinction (Statement D) : While the Incident severity is marked as High , the question specifically asks about event severity. The " Events " table at the bottom of the Incident Analysis page shows a " User login/logout failed " event with a medium severity. Because there is a distinction in the management console between the severity of individual events and the aggregated incident, and Statement A and B are technically definitive based on port and action, A and B are the correct architectural choices.
NEW QUESTION # 55
Refer to the exhibit.
A FortiAnalyzer report is shown.
You must extract relevant information provided by the report regarding your OT network.
Which two statements are correct? (Choose two.)
Answer: B,C
Explanation:
The correct answers are B and C . The exhibit ' s Top Threat section identifies the IPS threats as Blocked , directly confirming that the attacks were prevented rather than merely detected. The OT Traffic table also shows destination port 502 . Modbus/TCP conventionally operates on TCP port 502, and the OT Security 7.6 study guide identifies Modbus as an industrial protocol supported and inspected by Fortinet OT security controls. The report does not cover only one day; its displayed timeline spans multiple dates, from approximately October 30 through November 3. Option D is also inconsistent with the report because the visible OT destination addresses are associated with the 192.168.x.x networks rather than 10.1.5.1.
FortiAnalyzer reports summarize logged information into charts and tables specifically to expose traffic patterns, threats, and OT activity such as this.
NEW QUESTION # 56
......
The pressure is not terrible, and what is terrible is that you choose to evade it. You clearly have seen your own shortcomings, and you know that you really should change. Then, be determined to act! Buying our NSEI_OTS_AR-7.6 exam questions is the first step you need to take. Only with our NSEI_OTS_AR-7.6 Practice Guide, then you will totally know your dream clearly and have enough strenght to make it come true. Our NSEI_OTS_AR-7.6 learning materials have became a famous brand which can help you succeed by your first attempt.
Test NSEI_OTS_AR-7.6 Preparation: https://www.torrentvalid.com/NSEI_OTS_AR-7.6-valid-braindumps-torrent.html