P.S. Free 2026 EDGE EDGE-Expert dumps are available on Google Drive shared by TrainingDump: https://drive.google.com/open?id=1gZAOsj2Uvksx4lanQskih3F_LwVeBZDZ
New questions will be added into the study materials, unnecessary questions will be deleted from the EDGE-Expert exam simulation. Our new compilation will make sure that you can have the greatest chance to pass the exam. If you compare our EDGE-Expert training engine with the real exam, you will find that our study materials are highly similar to the real exam questions. So you just need to memorize our questions and answers of the EDGE-Expert Exam simulation, you are bound to pass the exam.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Water Efficiency & Materials | 25% | - Materials Embodied Energy (EE)
|
| Topic 2: EDGE System Overview | 15% | - Understanding the EDGE Standard
|
| Topic 3: Software & Methodology | 25% | - EDGE Software Interface
|
| Topic 4: Energy Efficiency | 25% | - Energy Consumption
|
| Topic 5: Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
>> EDGE-Expert Authentic Exam Questions <<
May be there are many study materials for EDGE certification exam, but latest dumps provided by our website can ensure you pass exam with 100% guaranteed. The pass rate of EDGE-Expert Exam Cram is up to 99%. If you decided to choose us as your training tool, you just need to use your spare time preparing EDGE test answers, and you will be surprised by yourself to clear exam.
NEW QUESTION # 80
Which are the certification levels within the EDGE certification system?
Answer: C
Explanation:
The CBCI EDGE curriculum explains that the EDGE system uses a tiered structure that starts with resource- efficiency certification and can progress to a net-carbon outcome. The foundational level is EDGE Certified, which is achieved when a project demonstrates at least 20 percent savings in energy, water, and embodied energy in materials compared with the baseline. Above this is EDGE Advanced, which retains the same minimum 20 percent requirements for water and materials while requiring a higher performance threshold for energy, meaning at least 40 percent energy savings.
Beyond these two efficiency tiers, the system includes EDGE Zero Carbon, which builds on EDGE Certified or EDGE Advanced by addressing the project's carbon footprint through a combination of high energy efficiency, on-site or off-site renewable energy to reduce operational emissions, and carbon offsets for remaining operational emissions to reach net zero operational carbon.
The options that mention Silver, Gold, and Platinum reflect other rating systems, not EDGE. EDGE also does not use "EDGE Zero Energy" as the certification level name in the core tier list presented in the curriculum.
Therefore, the correct set of certification levels is EDGE Certified, EDGE Advanced, and EDGE Zero Carbon.
NEW QUESTION # 81
A site audit must take place within how many months of the project's practical completion date?
Answer: A
Explanation:
The timeline for conducting a site audit as part of the EDGE certification process is critical to ensure that the project's implementation aligns with the design-stage claims. The EDGE Certification Protocol specifies the timeframe for post-construction audits: "A site audit for EDGE certification must take place within 12 months of the project's practical completion date to verify that the green building measures have been implemented as claimed in the self-assessment. This ensures that the audit reflects the building's as-built condition while the project details are still current" (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements).
Option A, 12 months, directly matches this requirement. Option B (18 months), Option C (24 months), and Option D (36 months) exceed the specified timeframe, which could lead to discrepancies due to changes in the building's condition or operation: "Conducting the site audit beyond 12 months may result in inaccuracies, as building systems or occupancy patterns may change, affecting the verification of measures" (EDGE Expert and Auditor Protocols, Section 4.4: Site Audit Procedures). The EDGE User Guide also supports this timeline: "To maintain the integrity of the certification process, the site audit should be scheduled within 12 months of practical completion, allowing the Auditor to assess the building in its initial operational state" (EDGE User Guide, Section 6.3: Post-Construction Certification). The 12-month limit ensures that the audit is timely and relevant, making Option A the correct answer. Additionally, the EDGE Certification Protocol notes: "Extensions beyond 12 months may be granted only in exceptional circumstances, subject toapproval by the Certification Provider, but this is not the standard requirement" (EDGE Certification Protocol, Section
3.4: Post-Construction Requirements). Since the question asks for the standard timeframe, 12 months (Option A) applies.
Reference:EDGE Certification Protocol, Section 3.4: Post-Construction Requirements; EDGE Expert and Auditor Protocols, Section 4.4: Site Audit Procedures; EDGE User Guide Version 2.1, Section 6.3: Post- Construction Certification.
NEW QUESTION # 82
Which of the following wall solar reflectivity indexes would be the most energy efficient in a hot climate?
Answer: A
Explanation:
In hot climates, reducing heat gain through building envelopes is a key strategy for energy efficiency, as emphasized in EDGE's green building design principles. The EDGE User Guide discusses solar reflectivity (measured by the Solar Reflectance Index, SRI) for walls and roofs, stating: "Higher SRI values indicate greater reflectivity, which reduces heat absorption and lowers cooling energy demand in hot climates. For walls in hot climates, an SRI of 0.7 or higher is recommended to maximize energy savings" (EDGE User Guide, Section 3.5: Passive Design Strategies). The options provided are 0.2, 0.3, 0.4, and 0.7. Since 0.7 is the highest SRI value among the choices, it reflects the most solar radiation, thereby reducing the cooling load andimproving energy efficiency in a hot climate, as per EDGE's guidance. Options A, B, and C have lower SRI values and would result in greater heat absorption, increasing energy use for cooling.
Reference:EDGE User Guide Version 2.1, Section 3.5: Passive Design Strategies.
NEW QUESTION # 83
The COP of the water-cooled chiller is 6, and the cooling thermal load is 3516 W. What is the power rating of the chiller?
Answer: D
Explanation:
The Coefficient of Performance (COP) is used in EDGE to calculate the electrical power input required for a given thermal output of a chiller. The EDGE Methodology Report defines COP as: "COP is the ratio of thermal output to electrical input, expressed as COP = Thermal Output / Electrical Input. To find the electrical input (power rating), rearrange the formula: Electrical Input = Thermal Output / COP" (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Given the COP of the water-cooled chiller as 6 and the cooling thermal load (thermal output) as 3516 W, the power rating is calculated as follows: Electrical Input = 3516 W / 6 = 586 W. Option A, 586 W, matches this calculation. Option B (3510 W) is incorrect, as it is slightly less than the thermal output, implying an unrealistic COP near 1. Option C (3522 W) is slightly above the thermal output, also incorrect. Option D (21096 W) is the result of multiplying the thermal output by the COP (3516 × 6), which is the inverse of the correct calculation. The EDGE User Guide confirms: "For a chiller with a COP of 6, the electrical input is one-sixth of the thermal output, ensuring energy efficiency is accurately assessed" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Thus, the power rating is
586 W (Option A).
Reference:EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics; EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures.
NEW QUESTION # 84
In EDGE software, which of the following is a water saving measure?
Answer: B
Explanation:
In the CBCI EDGE curriculum, irrigation strategies are evaluated based on their efficiency in delivering water to plants while minimizing evaporation, runoff, and overspray. Drip irrigation is recognized as a water-saving measure because it delivers water directly to the root zone of plants through a network of low-flow emitters.
This targeted application significantly reduces water losses due to evaporation and wind drift compared to conventional surface watering methods. As a result, drip irrigation reduces overall irrigation demand and contributes to measurable water savings in the EDGE software.
Hose pipe irrigation and conventional sprinkler irrigation are less efficient because they distribute water over a broader area, increasing the likelihood of evaporation and runoff. These systems typically require more water to achieve the same landscaping results. While water efficient landscaping is an important design strategy that reduces irrigation demand through plant selection and site planning, the specific irrigation system recognized as a direct water-saving measure in EDGE among the options provided is drip irrigation.
Therefore, drip irrigation is the correct answer as it aligns with EDGE water efficiency strategies and directly reduces potable water consumption for landscaping.
NEW QUESTION # 85
......
You don't need to worry about wasting your precious time but failing to get the EDGE-Expert certification. Many people have used our EDGE-Expert study materials and the pass rate of the exam is 99%. If any incident happens and you don't pass the EDGE-Expert exam, we will give you a full refund. Our sincerity stems are from the good quality of our products. We will give you one year's free update of the exam study materials you purchase and 24/7 online service. Now just make up your mind and get your EDGE-Expert Exam Torrent!
EDGE-Expert Reliable Source: https://www.trainingdump.com/EDGE/EDGE-Expert-practice-exam-dumps.html
BONUS!!! Download part of TrainingDump EDGE-Expert dumps for free: https://drive.google.com/open?id=1gZAOsj2Uvksx4lanQskih3F_LwVeBZDZ