ITExamSimulator is one of the most reliable platforms to get actual Nokia SRAN-Radio-Network-Performance-Optimization dumps. It offers the latest and valid real MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) exam dumps. The product of ITExamSimulator is available in Nokia SRAN-Radio-Network-Performance-Optimization PDF, EXAM CODE desktop practice exam software, and web-based MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) practice test.
| Section | Objectives |
|---|---|
| Topic 1: RF Optimization Principles | - Coverage and capacity optimization
|
| Topic 2: LTE/NR Performance Optimization | - Optimization techniques
|
| Topic 3: SRAN Architecture Overview | - SRAN network structure and components
|
| Topic 4: Radio Network Performance Fundamentals | - Key performance indicators (KPIs)
|
| Topic 5: Troubleshooting and Performance Analysis | - Network issue identification and resolution
|
>> SRAN-Radio-Network-Performance-Optimization Exam Questions Pdf <<
The simplified information in SRAN-Radio-Network-Performance-Optimization certification dumps makes your exam preparation immensely easier for you. All the SRAN-Radio-Network-Performance-Optimization exam questions answers are self-explanatory and provide the best relevant and authentic information checked and approved by the industry experts. No key point of the SRAN-Radio-Network-Performance-Optimization Exam is left unaddressed. The complex portions have been explained with the help of real life based examples. In case, you don't follow and SRAN-Radio-Network-Performance-Optimization dumps, you can contact our customer’s service that is operational 24/7 for your convenience.
NEW QUESTION # 31
At which mark are all conditions fulfilled for energy saving , so the cell will be switched off? Refer to the image below.
Answer: C
Explanation:
The correct answer is B , which corresponds to mark C in the diagram.
In the diagram, the energy-saving process follows these stages:
Before mark B , the cell is entering the power-saving period, but the required load condition has not yet been satisfied for the required duration.
At mark B , the measured load has gone below the configured threshold, but the cell is not switched off immediately. The system must confirm that the load remains below the required threshold for the configured time.
At mark C , the load has stayed below the required threshold for the required duration, shown as 5 minutes in the diagram. At this point, all conditions are fulfilled, and the cell can be switched off. The diagram also shows the state becoming:
energySavingState = energySaving
Marks D and E are already inside or near the later part of the power-saving period. Mark E is associated with operator suspension/exit behavior, not the initial moment when all switch-off conditions are first fulfilled.
NEW QUESTION # 32
What is the role of admission control in 5G networks ?
Answer: D
NEW QUESTION # 33
Which of the following statements does not apply to mmWave radio propagation ?
Answer: B
Explanation:
The correct answer is C .
At mmWave / FR2 frequencies , radio propagation is more challenging than in low-band or mid-band spectrum. Diffraction becomes weaker, blockage is more severe, foliage attenuation is high, and building penetration loss is significant. This is why mmWave networks usually require dense site grids, line-of-sight or near-line-of-sight paths, and strong beamforming. Industry mmWave references consistently describe high path loss, high penetration loss, and the need for directional antenna systems to compensate for these losses.
Option C does not apply because water absorption and atmospheric absorption generally become more relevant at higher frequencies, not lower. Rain, humidity, and oxygen/water-vapor absorption are important considerations for mmWave link budgets.
So the statement that does not apply to mmWave propagation is:
Low water absorption at high frequencies.
NEW QUESTION # 34
In NR SA Option 2, the UE is camped on an SA serving cell. An IRAT handover is triggered for a multi-QCI call, QCI 1 and QCI 6, due to weak coverage of the serving cell. What will happen to both QCIs during the IRAT handover toward LTE?
Answer: A
Explanation:
The correct answer is D.
In 5G SA Option 2, NR works independently with the 5G Core, but interworking with LTE/EPC can be supported for mobility continuity. When IRAT handover toward LTE is triggered due to weak NR coverage, the goal is to preserve the active services during mobility.
For a multi-QCI service:
QCI 1 normally represents the voice bearer, such as VoLTE/IMS voice continuity after movement to LTE.
QCI 6 normally represents a non-GBR data bearer.
During a supported IRAT handover from NR SA to LTE, both the voice bearer and data bearer can be transferred to LTE, assuming proper interworking, bearer mapping, and LTE coverage availability.
Option C is incorrect because IRAT mobility from NR SA to LTE is supported in properly configured networks. Option A is incorrect because the voice bearer is the most critical bearer to preserve. Option B is also not the best answer because the data bearer does not necessarily need to be released during IRAT handover.
Therefore, the expected result is:
Both QCI 1 voice and QCI 6 data continue on LTE.
NEW QUESTION # 35
In the context of mmWave deployments , what is the primary benefit of analog beamforming ?
Answer: B
Explanation:
The correct answer is A .
In mmWave systems, beamforming is essential because FR2 signals suffer from high path loss and blockage.
Analog beamforming uses fewer RF chains than fully digital beamforming, so it is cheaper and less complex in terms of RF hardware, power consumption, and implementation. Research and industry references explain that analog and hybrid beamforming architectures reduce the number of required ADCs/RF chains compared with fully digital beamforming, lowering cost and power complexity.
However, analog beamforming has limitations. It usually forms one beam, or a limited number of beams, at a time from a panel. Supporting multiple independent simultaneous beams and more UEs per sector is more associated with digital or hybrid beamforming, not pure analog beamforming.
Therefore, the primary benefit is:
Low cost and low complexity for coverage at higher mmWave bands.
NEW QUESTION # 36
......
In every area, timing counts importantly. With the advantage of high efficiency, our SRAN-Radio-Network-Performance-Optimization practice materials help you avoid wasting time on selecting the important and precise content from the broad information. In such a way, you can confirm that you get the convenience and fast. By studying with our SRAN-Radio-Network-Performance-Optimization Real Exam for 20 to 30 hours, we can claim that you can get ready to attend the SRAN-Radio-Network-Performance-Optimizationexam.
SRAN-Radio-Network-Performance-Optimization Simulation Questions: https://www.itexamsimulator.com/SRAN-Radio-Network-Performance-Optimization-brain-dumps.html