Are you aware of the importance of the 300-110 certification? If your answer is not, you may place yourself at the risk of be eliminated by the labor market. Because more and more companies start to pay high attention to the ability of their workers, and the 300-110 Certification is the main reflection of your ability. And our 300-110 exam question are the right tool to help you get the certification with the least time and efforts. Just have a try, then you will love them!
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Wireless Site Survey | 25% | - Design requirements collection and constraint evaluation
- Pre-deployment survey and validation - RF propagation and attenuation analysis |
| Topic 2: Wireless Infrastructure Design | 30% | - High-density wireless design
|
| Topic 3: Mobility Design | 25% | - Mobility architecture models
|
| Topic 4: WLAN High Availability and Security Design | 20% | - High availability design
- Security architecture design
|
>> 300-110 Practice Test Engine <<
BootcampPDF makes your investment 100% secure when you purchase 300-110 practice exams. We guarantee your success in the 300-110 exam. Otherwise, our full refund policy will enable you to get your money back. The practice exams for CCNP Wireless are prepared by the 300-110 subject experts who are well aware of the 300-110 exam syllabus requirements. Our Customer support team is 24/7 available that you can reach through email or Live Chat for any 300-110 exam preparation product related question.
NEW QUESTION # 48
An educational organization recently deployed an anchored WLAN and has a high number of client connections at any given time that stream video. The wireless infrastructure includes two Cisco 9800 WLCs. To prevent web traffic being slow, an engineer must configure the deployment to prevent excessive fragmentation of the client data. Which configuration must the engineer apply?
Answer: D
Explanation:
In an anchored WLAN deployment, client traffic is encapsulated within CAPWAP mobility tunnels between the foreign WLC (where the AP joins) and the anchor WLC (in the DMZ or designated network segment). This tunneling adds encapsulation overhead -- CAPWAP/mobility tunnel headers consume a portion of the available MTU on the transport path. When video streaming clients generate large TCP segments, these segments may exceed the effective MTU of the mobility tunnel path, causing IP fragmentation at the WLC or along the path to the anchor.
Fragmentation significantly degrades throughput and increases CPU overhead for high-volume video traffic. The correct solution is TCP MSS Clamping -- reducing the Maximum Segment Size value advertised in TCP SYN packets so that TCP endpoints negotiate a segment size remaining below the fragmentation threshold. The Cisco 9800 WLC supports TCP MSS adjustment, which intercepts TCP handshake packets and rewrites the MSS option to a value accounting for CAPWAP tunnel overhead.
NEW QUESTION # 49
A customer has two Cisco Catalyst 9800 Series WLCs named WLC-A and WLC-B in an N+1 configuration with the same WLANs but different Layer 3 interfaces for each WLC, and APs in local mode. WLC-A manages Building A APs and WLC-B manages Building B APs. The customer wants users to remain connected and retain their session state including the IP address when moving between buildings. How must this requirement be incorporated into the design?
Answer: A
Explanation:
The requirement for users to retain their session state and IP address when roaming between buildings managed by different WLCs is a Layer 3 roaming scenario. In Cisco's wireless architecture, IP address preservation across controller boundaries is achieved through inter- controller mobility -- specifically the foreign-anchor mobility tunnel mechanism. When a client roams from Building A (WLC-A) to Building B (WLC-B), WLC-B becomes the foreign controller and WLC-A becomes the anchor controller. WLC-B tunnels the client's traffic back to WLC-A, allowing the client to retain its original IP address even while physically associated to an AP managed by WLC-B. This requires a mobility tunnel between WLC-A and WLC-B with both controllers configured in the same mobility group name -- the group name is the trust identifier that permits the mobility tunnel and anchor- foreign relationship to form. Without the same group name, the controllers will not form a trusted mobility peer relationship.
NEW QUESTION # 50
A customer has a Cisco wireless network that supports VoWLAN services. The customer wants supported voice clients to receive roaming recommendations and suggestions from APs. This functionality must not impact non-VoWLAN clients. What should be enabled on the VoWLAN SSID?
Answer: C
Explanation:
IEEE 802.11v BSS Transition Management is the standard that enables the network (via the AP) to actively provide roaming recommendations and suggestions to associated clients. When enabled on a SSID, the AP can send BSS Transition Management Request frames to clients, informing them of preferred target APs ranked by signal quality, load, and channel conditions.
Critically, BSS Transition Management is a voluntary mechanism -- clients that support 802.11v can act on the AP's recommendation, while clients that do not support 802.11v simply ignore the BSS Transition Request frames and continue operating normally. This selective applicability directly satisfies the requirement that non-VoWLAN clients must not be impacted.
NEW QUESTION # 51
A university lecture hall has a Cisco wireless high-density network with this configuration: ?5 GHz only ?20-MHz channels ?UNII-1, UNII-2, and UNII-2E channels ?TPC minimum = 8 ?TPC maximum = 14 The lecture hall is 200 feet by 100 feet and has 16 Cisco APs that use directional antennas. Which feature must be included in the design to mitigate and reduce high-channel utilization from rogue APs?
Answer: A
Explanation:
Receive Start of Packet (RxSOP) is a Cisco proprietary mechanism that defines the minimum received signal threshold at which an access point will acknowledge an 802.11 frame and begin processing it. In a high-density lecture hall environment with 16 APs and directional antennas on a constrained channel plan, rogue APs operating on the same or adjacent channels contribute directly to elevated channel utilization by causing unnecessary medium contention, virtual carrier sensing via NAV, and clear channel assessment deferral. By raising the RxSOP threshold on the legitimate APs, the engineer creates a higher signal floor requirement -- only signals above the configured RxSOP level are processed. Signals from distant rogue APs, arriving below this threshold, are silently discarded rather than processed, preventing them from consuming airtime through CCA deferral and NAV mechanisms.
NEW QUESTION # 52
Which profile is included within a site tag when configured in a Cisco 9800 WLC architecture?
Answer: D
Explanation:
The Cisco Catalyst 9800 IOS XE WLC uses a tag-based configuration architecture. Three primary tag types are used: site tags, policy tags, and RF tags. The site tag associates an AP with its operational context and contains two specific profile references: the AP join profile (defining AP-level parameters such as NTP, syslog, SSH, LED behavior, and CAPWAP timers) and the flex profile (defining FlexConnect-specific parameters including locally switched VLANs, split tunneling, local authentication settings, and VLAN-ACL mappings). The flex profile within the site tag enables the AP to operate in FlexConnect mode with locally configured switching behavior when WLC connectivity is lost. QoS (Option A) policies are applied at the policy tag level within WLAN policies. NAT (Option B) is not a native profile type in the 9800 tag architecture. VLAN (Option D) configurations are defined within the flex profile or policy profile and are not standalone profile types at the tag level. Understanding the three-tag model is essential for designing and troubleshooting 9800-based deployments. Reference: WLSD Study Guide - Catalyst 9800 Configuration Model, Site Tag Architecture, Flex Profile and AP Join Profile.
NEW QUESTION # 53
......
There are many merits of our product on many aspects and we can guarantee the quality of our Designing Cisco Wireless Networks 300-110 practice engine. Firstly, our experienced expert team compile them elaborately based on the real exam. Secondly, both the language and the content of our Cisco 300-110 Study Materials are simple.
300-110 Latest Exam Question: https://www.bootcamppdf.com/300-110_exam-dumps.html