The LatestCram guarantees their customers that if they have prepared with Microsoft AZ-802 practice test, they can pass the Microsoft AZ-802 certification easily. If the applicants fail to do it, they can claim their payment back according to the terms and conditions. Many candidates have prepared from the actual Microsoft AZ-802 Practice Questions and rated them as the best to study for the examination and pass it in a single try with the best score.
| Section | Objectives |
|---|---|
| Secure Windows Server hybrid infrastructures | - Security configuration
|
| Monitoring and troubleshooting | - Diagnostics
|
| Implement and manage high availability | - Failover clustering
|
| Disaster recovery and migration | - Backup and restore
|
| Networking and storage infrastructure | - Networking
|
| Manage hybrid compute and virtualization | - Containers
|
LatestCram Microsoft AZ-802 exam information is proven. We can provide the questions based on extensive research and experience. LatestCram has more than 10 years experience in IT certification AZ-802 exam training, including questions and answers. On the Internet, you can find a variety of training tools. LatestCram AZ-802 Exam Questions And Answers is the best training materials. We offer the most comprehensive verification questions and answers, you can also get a year of free updates.
NEW QUESTION # 425
Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains domain controllers that run Windows Server 2019 and are configured as shown in the following table. You plan to run the adprep /domainprep command. Which domain controller should be available for the command to complete?
Domain controllers and FSMO role table
Answer: A
Explanation:
Running adprep /domainprep requires that the domain controller currently holding the Infrastructure Master operations master role be online and reachable during the operation, because the domainprep step updates security descriptors, access control entries, and permissions on domain-wide objects that depend on coordination through that specific FSMO role holder; if the Infrastructure Master is offline, the domainprep portion of the adprep process cannot complete successfully. The exhibit shows that among the five domain controllers, DC5 is the one that holds the Infrastructure Master role, so DC5 specifically must be available and reachable on the network for adprep /domainprep to run to completion. The Schema Master role, held by DC4 in this exhibit, is the role holder that must be online for the separate adprep /forestprep command instead, since forestprep applies schema extensions that require the Schema Master, not the Infrastructure Master; that is a different role and a different adprep sub-command from the one described in this scenario.
The PDC emulator, RID master, and Domain naming master roles held by DC1, DC2, and DC3 respectively are not the specific role that adprep /domainprep depends on being online, so none of those three domain controllers is the correct answer here.
NEW QUESTION # 426
Technical requirements: Promote a new server named DC4 that runs Windows Server 2022 to a domain controller. Replicate the virtual machines from Cluster2 to an Azure Recovery Services vault. Centrally manage performance alerts in Azure for all the domain controllers. Ensure that User1 can recover objects from the Active Directory Recycle Bin. Migrate Share1 to Server2, including all the share and folder permissions. Back up Server4 and all data to an Azure Recovery Services vault. Use Hyper-V Replica to protect the virtual machines in Cluster3. Implement BitLocker Drive Encryption (BitLocker) on Server4.
Whenever possible, use the principle of least privilege. You need to identify the minimum number of Azure Site Recovery Provider installations required to protect Cluster2. What is the minimum number of installations required?
Answer: B
Explanation:
The Azure Site Recovery Provider must be installed and registered on every Hyper-V host that is a node of the cluster being protected, because each node is a location the protected virtual machines could reside on after a live migration, and each node must independently be able to track and replicate the VMs it is currently hosting. Cluster2 has four nodes according to the Hyper-V failover clusters table (Cluster1 has six nodes and eighteen virtual machines, Cluster2 has four nodes and twelve virtual machines, and Cluster3 has two nodes and six virtual machines), so a minimum of four Provider installations -- one per node -- is required; installing the Provider on only one, two, or three of the nodes would leave replication unable to follow a protected VM if it live-migrated to whichever node lacks the Provider, breaking continuous replication for that VM the moment it moved. Therefore, four is the minimum number of Azure Site Recovery Provider installations required to fully protect all of Cluster2 ' s virtual machines regardless of which node currently hosts them.
NEW QUESTION # 427
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a server named Server1 that runs Windows Server and has the DHCP Server role. Server1 contains a single DHCP scope named Scope1. You deploy five printers to the network. You need to ensure that the printers are always assigned the same IP address. Solution: You deploy a DHCP relay agent to the network.
Does this meet the requirement?
Answer: A
Explanation:
A DHCP relay agent ' s job is purely to forward DHCP broadcast traffic from clients on a subnet that has no local DHCP server across a router boundary to a DHCP server located on a different subnet, so that clients on remote subnets can still obtain leases from a centralized DHCP server. It has no role whatsoever in determining which specific IP address a given client receives, and it provides no mechanism for binding a particular client ' s MAC address to a particular, consistently reused IP address. Deploying a DHCP relay agent would only be relevant here if the five printers were on a different subnet than Server1 with no DHCP server of their own reachable locally -- and even then, it would only enable them to reach Server1 ' s DHCP service, not guarantee they receive the same address each time. The mechanism that actually guarantees a specific client always receives the same IP address is a DHCP reservation, which this solution does not involve at all. Therefore, deploying a DHCP relay agent to the network does not meet the requirement that the five printers always be assigned the same IP address.
NEW QUESTION # 428
You have a Group Policy Object (GPO) named GPO1 that contains user settings only. You plan to apply GPO1 to a global security group named Group1. You link GPO1 to the domain, and you remove all the permissions granted to the Authenticated Users group. You need to configure permissions for GPO1 to meet the following requirements: GPO1 must apply only to the users in Group1; the solution must use the principle of least privilege. Which permissions should you grant to Group1 and the Domain Computers group? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Group1: Apply group policy and Read. Domain Computers: Read only.
By default, Authenticated Users (which includes both user and computer accounts) is granted Read and Apply Group Policy on every new GPO, which is what lets any computer download and evaluate it and lets any signed-in user actually receive its settings; removing that default grant means both permissions must be explicitly re-established for exactly the principals that need them, and no more. Group1 contains the users who must actually receive GPO1 ' s user settings, so it needs both Read (to let the GPO be retrieved and evaluated at all) and Apply Group Policy (to let its settings actually take effect for those users); granting only one would leave the GPO unreadable, or readable but inert, for Group1 ' s members. Domain Computers is different: even though GPO1 contains only User Configuration settings, Group Policy processing on a computer still needs to enumerate and download every GPO linked to its scope in order to evaluate applicability (security filtering, WMI filters) before it can tell whether a given logged-on user should receive it. If Domain Computers has no Read permission at all, computers cannot process GPO1, which breaks correct evaluation for the very users in Group1 who sign in to those computers. Granting Domain Computers only Read - not Apply Group Policy, since GPO1 has no computer settings to apply and granting Apply would exceed least privilege - lets computers process the GPO correctly while ensuring only Group1 ' s members ever receive its settings.
NEW QUESTION # 429
You have on-premises servers that run Windows Server as shown in the following table.
You have an Azure file share named share1 that stores two files named File2.docx and File3.docx.
You create an Azure File Sync sync group that includes the following endpoints:
share
D:\Folder1 on Server1
D:\Datal on Server2
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Once a server endpoint is added to a sync group, Azure File Sync establishes the full namespace of the cloud endpoint on that server endpoint (as full files or as tiered placeholders, depending on the cloud tiering policy), and ordinary file operations such as creating or saving a file continue to work exactly like any local file operation - the sync engine reconciles the result afterward rather than blocking the write. Saving a file named File2.docx in D:\Folder1 on Server1 is therefore a normal, permitted operation even though a file of that name already exists in the cloud endpoint ' s namespace; the local write simply becomes the current version of that file, and Azure File Sync will sync the change (potentially generating a conflict copy only if the same file were edited concurrently from another endpoint at the same time). Creating File1.docx in D:
\Data1 on Server2 is likewise a completely ordinary create operation on a name that does not already exist anywhere in this sync group ' s namespace, and nothing in Azure File Sync restricts creating new files locally in a synced folder. Finally, because Server1 ' s D:\Folder1 is a server endpoint of the same sync group as the share1 cloud endpoint, every file present in share1 - including File3.docx - is projected into Server1 ' s namespace as part of normal sync group membership, whether as a fully cached file or, if it falls outside the cloud tiering policy ' s recency window, as a placeholder; either way, it will sync to and appear on Server1.
NEW QUESTION # 430
......
With LatestCram, you can trust that you're accessing authentic and error-free AZ-802 exam practice questions. These questions are available in three different formats: PDF questions files, desktop practice test software, and web-based practice test software. All three formats contain genuine AZ-802 Practice Questions that will effectively prepare you for the final exam.
Latest AZ-802 Braindumps Pdf: https://www.latestcram.com/AZ-802-exam-cram-questions.html