What's more, part of that Real4exams F5CAB3 dumps now are free: https://drive.google.com/open?id=1Ew1ZYQrQ-5_Jatw7Sl3831SPR3ls2nYR
The F5CAB3 exam questions are designed and verified by experienced and qualified F5 F5CAB3 exam trainers. So you rest assured that with F5CAB3 exam dumps you can streamline your F5CAB3 exam preparation process and get confidence to pass F5CAB3 exam in first attempt. The countless candidates have already passed their F5CAB3 Certification Exam and they all used the real, valid, and updated Real4exams F5CAB3 exam questions. So, why not, take a decision right now and ace your F5CAB3 exam preparation with top-notch F5CAB3 exam questions?
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
>> Latest Braindumps F5 F5CAB3 Book <<
Not only our F5CAB3 study guide has the advantage of high-quality, but also has reasonable prices that are accessible for every one of you. So it is incumbent upon us to support you. On the other side, we know the consumers are vulnerable for many exam candidates are susceptible to ads that boost about F5CAB3 skills their practice with low quality which may confuse exam candidates like you, so we are trying hard to promote our high quality F5CAB3 study guide to more people.
NEW QUESTION # 31
Refer to the exhibit.
DNS queries from two internal DNS servers are being load-balanced to external DNS servers via a virtual server on a BIG-IP device. The DNS queries originate from:
192.168.10.100
192.168.10.200
and target:
192.168.2.150
All DNS queries destined for the external DNS servers fail.
Which property change should the BIG-IP Administrator make in the Virtual Server to resolve this issue?
(Choose one answer)
Answer: A
Explanation:
DNS traffic is primarily transported using UDP port 53. In the exhibit, the Virtual Server is configured with the Protocol set to TCP, which prevents standard DNS queries from being processed correctly. BIG-IP Virtual Servers must be configured with the correct Layer 4 protocol to match the application traffic they are handling.
According to the BIG-IP Administration: Data Plane Configuration documentation:
The Protocol setting on a Virtual Server defines whether traffic is processed as TCP, UDP, or another supported transport protocol.
Standard DNS queries and responses use UDP, while TCP is only required for DNS zone transfers (AXFR) or exceptionally large responses.
When a DNS Virtual Server is incorrectly configured with TCP, UDP-based DNS queries are dropped, causing all requests to fail.
Why the other options are incorrect:
A). Protocol profile (Client) to DNS_OPTIMIZEDA DNS profile enhances DNS functionality but does not correct an incorrect transport protocol configuration.
B). Type to Performance (HTTP)Performance (HTTP) Virtual Servers are designed for HTTP traffic and are not suitable for DNS services.
C). Source Address to 192.168.10.0/24The existing source IPs already fall within the allowed range, so this setting does not address the failure.
Correct Resolution:
Changing the Protocol to UDP aligns the Virtual Server with standard DNS transport requirements, allowing DNS queries to be successfully processed and load-balanced.
NEW QUESTION # 32
Refer to the exhibit.
A BIG-IP Administrator creates a new Virtual Server to load balance SSH traffic. Users are unable to log on to the servers.
What should the BIG-IP Administrator do to resolve the issue? (Choose one answer)
Answer: D
Explanation:
SSH is a Layer 4 TCP-based protocol that operates on TCP port 22 and does not use HTTP in any capacity. In the exhibit, the Virtual Server is configured with an HTTP Profile applied, which is inappropriate for SSH traffic and causes connection failures.
According to the BIG-IP Administration: Data Plane Configuration documentation:
An HTTP profile must only be applied to Virtual Servers handling HTTP or HTTPS traffic.
When an HTTP profile is attached, BIG-IP expects HTTP headers and attempts to parse application-layer data.
Non-HTTP protocols such as SSH, FTP (control), SMTP, and other raw TCP services will fail if an HTTP profile is enabled.
Why the other options are incorrect:
A). Set Protocol to UDPSSH uses TCP, not UDP. Changing the protocol would break SSH entirely.
B). Set Source Address to 10.1.1.2The source address setting controls client access restrictions and is unrelated to protocol parsing issues.
C). Set Destination Address/Mask to 0.0.0.0/0The destination address is already valid for a specific SSH service and does not impact protocol handling.
Correct Resolution:
The BIG-IP Administrator should remove the HTTP Profile (set it to None) so the Virtual Server functions as a pure Layer 4 TCP service, allowing SSH connections to pass through successfully.
NEW QUESTION # 33
A BIG-IP Administrator is setting up a new BIG-IP device. The network administrator reports that the interface has an incompatible media speed. The BIG-IP Administrator needs to change this setting manually.
From which location should the BIG-IP Administrator perform this task?
Answer: C
Explanation:
Standard BIG-IP administration dictates that hardware-level physical attributes are managed within the Network section of the configuration. When a network switch and a BIG-IP fail to successfully negotiate speed and duplex settings (Auto-Negotiation), it can result in CRC errors, late collisions, or a total lack of link. To resolve this manually, the administrator must navigate to the Configuration Utility (GUI) and go to Network > Interfaces.
Within the Interfaces list, the administrator can select the specific physical port (e.g., 1.1 or 1.2) and modify its properties. By default, the media speed is set to "Auto," but the drop-down menu allows for manual selection of specific speeds (e.g., 100Mb/s, 1Gb/s, 10Gb/s) and duplex settings (Full or Half). While these changes can also be made via the TMOS Shell (TMSH) (Option B) using the modify net interface command, the question asks for the standard location, which in most administrative contexts refers to the primary GUI path. System > Configuration (Option D) is used for global device settings like NTP, DNS, and licensing, not for interface-specific physical layer parameters. The Front Console (Option A), referring to the LCD panel on physical appliances, is primarily used for initial management IP setup and viewing system alerts, but does not provide the granular interface configuration required for media speed adjustments.
NEW QUESTION # 34
Where in the configuration utility should the BIG-IP Administrator verify the pool member currently assigned to a pool is on port 80?
Answer: B
Explanation:
The BIG-IP Configuration Utility (GUI) organizes information hierarchically to allow for granular management of application objects. A Pool is a collection of backend servers (pool members) that provide the same service. To verify the specific network parameters-such as the IP address and the service port-of the servers within a pool, the administrator must navigate to the specific pool's configuration.
The standard procedural path to verify this is Local Traffic > Pools: Pool List, where the administrator selects the specific pool name. Once inside the pool's configuration, the Members tab displays a list of all IP addresses and service ports associated with that pool. Under the "Service Port" column, the administrator can confirm if the member is listening on port 80 (HTTP).
Options A and B are incorrect for this specific verification task. While Nodes (Option A) show the health of a physical server, a node represents only an IP address and does not have a "Service Port" associated with it until it is defined as a pool member. Verifying the Health Monitor (Option B) would tell the administrator how the system is checking the member's status, but it does not definitively show the port on which the member is actually receiving application traffic. In a BIG-IP environment, a pool member is uniquely identified by the combination of its Node IP and its Service Port, and the Members tab is the primary interface for managing and auditing these specific member attributes.
NEW QUESTION # 35
A BIG-IP Administrator adds new pool members into an existing, highly utilized pool. Soon after, there are reports that the application is failing to load for some users.
What pool-level setting should the BIG-IP Administrator check?
Answer: C
Explanation:
Slow Ramp Time prevents new pool members from receiving a full share of traffic immediately, allowing applications to warm up gradually.
NEW QUESTION # 36
......
Our website experts simplify complex concepts of the F5CAB3 exam questions and add examples, simulations, and diagrams to explain anything that might be difficult to understand. Therefore, even ordinary examiners can master all the F5CAB3 learning materials without difficulty. And the price of our F5CAB3 Study Guide is reasonable for even the students can afford it. At the same time, we give some discounts from time to time, you can buy our F5CAB3 practice engine at a favorable price.
F5CAB3 Learning Materials: https://www.real4exams.com/F5CAB3_braindumps.html
BONUS!!! Download part of Real4exams F5CAB3 dumps for free: https://drive.google.com/open?id=1Ew1ZYQrQ-5_Jatw7Sl3831SPR3ls2nYR