Hottest 300-610 Certification | 300-610 Valid Exam Test

DOWNLOAD the newest TroytecDumps 300-610 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1lzk0gKBUk7D8AOrqYntszbfoXYXd53XE

To give you an idea about the top features of TroytecDumps Designing Cisco Data Center Infrastructure (300-610) exam questions, a free demo of TroytecDumps Designing Cisco Data Center Infrastructure (300-610) exam dumps is being offered free of cost. Just download TroytecDumps Designing Cisco Data Center Infrastructure (300-610) exam questions demo and checks out the top features of TroytecDumps Designing Cisco Data Center Infrastructure (300-610) exam dumps. If you feel that TroytecDumps Cisco 300-610 exam questions work for you then buy the full and final TroytecDumps Designing Cisco Data Center Infrastructure (300-610) exam dumps at an affordable price and start Designing Cisco Data Center Infrastructure (300-610) exam preparation.

Cisco 300-610 Exam Syllabus Topics:

Section	Weight	Objectives
Storage Network Design	20%	- Storage Architectures 1. Zoning and VSANs 2. SAN Topologies (Core-Edge, Collapsed Core) - Storage Protocols 1. iSCSI 2. Fibre Channel (FC) 3. FCoE (Fibre Channel over Ethernet)
Compute Design	25%	- Network Connectivity 1. SAN (Storage Area Network) connectivity 2. LAN (Local Area Network) connectivity - Cisco UCS Architecture 1. Hyperflex integration 2. Service Profiles and Templates 3. C-Series and B-Series servers
Network Design	35%	- Layer 2/Layer 3 Connectivity 1. Routing protocols (OSPF, EIGRP, BGP) 2. VPC (Virtual Port Channel) 3. Spanning Tree Protocol (STP) - ACI (Application Centric Infrastructure) 1. VMM (Virtual Machine Manager) integration 2. Spine-Leaf architecture - Overlay Technologies 1. VXLAN EVPN 2. OTV (Overlay Transport Virtualization)
Security and Availability	5%	- Security Design 1. TrustSec 2. Firewalls (ASA/FTD) - High Availability 1. Redundancy protocols 2. Disaster Recovery (DR) design
Automation and Orchestration	15%	- Management Tools 1. UCS Manager 2. UCS Director 3. Intersight - Scripting and APIs 1. Ansible 2. Python scripting 3. REST APIs

>> Hottest 300-610 Certification <<

Hottest 300-610 Certification Exam Pass For Sure | 300-610: Designing Cisco Data Center Infrastructure

TroytecDumps are supposed to help you pass the 300-610 exam smoothly. Don't worry about channels to the best 300-610 study materials so many exam candidates admire our generosity of offering help for them. Up to now, no one has ever challenged our leading position of this area. The existence of our 300-610 learning guide is regarded as in favor of your efficiency of passing the exam. Over time, our company is becoming increasingly obvious degree of helping the exam candidates with passing rate up to 98 to 100 percent. All our behaviors are aiming squarely at improving your chance of success on 300-610 Exam.

Cisco Designing Cisco Data Center Infrastructure Sample Questions (Q307-Q312):

NEW QUESTION # 307
A customer needs to deploy a three-tier network architecture that will consist of web, and other business- critical applications. The solution will include Cisco UCS 6324 Fabric interconnects managing B and C Series servers The Fabric interconnects will be connected to the cisco nexus 7706 series switch for network access.
A storage array will be directly connected to the UCS deployment. Which type must be used to meet these requirements?

A. UCS Interconnect in Ethernet end-host modeUCS Interconnect in Fibre Channel switching modeFabric Interconnects uplinked to the Nexus device using an LACP port-channel in active mode
B. UCS Inter conned in Ethernet switching modeUCS interconnect in Fibre Channel end-host modeFabric Interconnects uplinked to the Nexus device using an LACP port-channel in active mode
C. UCS Interconnect in Ethernet end-host modeUCS Interconnect in Fibre Channel end-host modeFabric Interconnect uplinked to me Nexus device using an LACP port-channel in passive mode
D. UCS Interconnect in Ethernet switching modeUCS interconnect to Fibre Channel switching modeFabric Interconnect uplinked to the Nexus device using an LACP port-channel in passive mode

Answer: A

Explanation:
FC must be in switching mode for Direct Attached Storage.

NEW QUESTION # 308
Drag and Drop Question
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.

Answer:

Explanation:

Explanation:
End-host mode features include:
- Spanning Tree Protocol is not run on both the uplink ports and the server ports.
- MAC address learning occurs only on the server ports; MAC address movement is fully supported.
- Links are active-active regardless of the number of uplink switches.
- The system is highly scalable because the control plane is not occupied.
Ethernet switching mode features include:
- Spanning Tree Protocol is run on the uplink ports per VLAN as defined by Cisco Per-VLAN Spanning Tree Plus (PVST+)
- Configuration of Spanning Tree Protocol parameters (bridge priority, hello timers, etc.) is not supported.
- VLAN Trunk Protocol (VTP) is not supported.
- MAC address learning and aging occur on both the server and uplink ports as in a typical Layer
2 switch.
- Upstream links are blocked according to Spanning Tree Protocol rules.

NEW QUESTION # 309
Which two naming formats identify target or initiator iSCSI nodes? (Choose two.)

A. EUI
B. IQN
C. WWN
D. WWPN
E. OUI

Answer: A,B

Explanation:
https://docs.vmware.com/en/VMware-vSphere/5.5/com.vmware.vsphere.storage.doc/GUID-
686D92B6-A2B2-4944-8718-F1B74F6A2C53.html

NEW QUESTION # 310
An engineer must interconnect two geographically separated data centers. The service provide offers a Layer
2 metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between sites requires a line-rate throughput regardless of the packet size and speed. Which solution meets these requirements?

A. L2TPv3
B. MACsec
C. IPsec
D. L2TPv2

Answer: B

Explanation:
https://www.cisco.com/c/dam/en/us/td/docs/solutions/Enterprise/Security/MACsec/WP-High-Speed-WAN-Encrypt-MACsec.pdf

NEW QUESTION # 311
A network consultant must design a high availability interconnection of a clustered Cisco UCS Fabric Interconnect toward two upstream Layer 2 switches.
The Ethernet interconnection must use all redundant links and have no impact on the STP domain size.
Which connectivity solution must be used?

A. Cisco UCS Fabric Interconnect in switch mode with dual uplinks distributed evenly to the upstream switches
B. Cisco UCS Fabric Interconnect in end host mode with dual uplinks distributed evenly to the upstream switches
C. Cisco UCS Fabric Interconnect in switch mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size
D. Cisco UCS Fabric Interconnect in end host mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size

Answer: B

NEW QUESTION # 312
......

Buying any product should choose a trustworthy company. Our TroytecDumps can give you the promise of the highest pass rate of 300-610 exam; we can give you a promise to try our 300-610 software for free, and the promise of free updates within a year after purchase. To resolve your doubts, we assure you that if you regrettably fail the 300-610 Exam, we will full refund all the cost you buy our study materials. TroytecDumps is your best partners in your preparation for 300-610 exam.

300-610 Valid Exam Test: https://www.troytecdumps.com/300-610-troytec-exam-dumps.html

2026 Latest TroytecDumps 300-610 PDF Dumps and 300-610 Exam Engine Free Share: https://drive.google.com/open?id=1lzk0gKBUk7D8AOrqYntszbfoXYXd53XE