More and more people hope to enhance their professional competitiveness by obtaining 350-101 certification. However, under the premise that the pass rate is strictly controlled, fierce competition makes it more and more difficult to pass the 350-101 examination. Whether you are the first or the second or even more taking 350-101 examination, our 350-101 exam prep not only can help you to save much time and energy but also can help you pass the exam. In the other words, passing the exam once will no longer be a dream.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
>> 350-101 Latest Exam Practice <<
Do not postpone seeking help from our extraordinary Cisco 350-101 dumps to get the crucial Cisco 350-101 certification exams. This platform allows you to self-assess your progress with a performance score. You can also customize your Cisco 350-101 mock tests according to the time and kinds of practice queries. It imitates the exact pattern of the actual Cisco 350-101 certification exam.
NEW QUESTION # 39 
Refer to the exhibit. A client authenticates via 802.1X against an ISE server that is configured to return a specific VLAN ID (VLAN 100) via an attribute value pair. However, the administrator notices that the client is placed in the wrong VLAN (VLAN 50). What must the administrator implement to resolve the issue?
Answer: D
Explanation:
In this scenario, the client is placed in the wrong VLAN (VLAN 50) even though the ISE server is configured to assign VLAN 100. The key part of the issue is that the VLAN assignment returned by ISE is not being applied correctly.
Option A: "Configure the policy profile to allow ISE to override the VLAN."This is the correct answer. The policy profile on the Wireless LAN Controller (WLC) should be configured to allow the ISE server's VLAN assignment to override the locally configured VLAN settings on the WLC. Without this, the WLC might default to its pre-configured VLAN (VLAN 50) instead of the VLAN assigned by ISE (VLAN 100).
Option B: "Configure VLAN 100 as an SVI on the WLC."This option is unnecessary. While an SVI (Switched Virtual Interface) is required to route between VLANs, it is not the cause of the issue here. The problem is that the correct VLAN (VLAN 100) is not being applied to the client, not that the WLC lacks an SVI.
Option C: "Configure VLAN 100 on the trunk ports of the WLC."This option is also not relevant. The issue is not with trunking but with VLAN assignment from ISE. The trunking configuration ensures that VLANs are allowed across ports, but it does not address the client being placed in the wrong VLAN.
Option D: "Configure AAA VLAN enable on the WLAN."This option is not directly related to the issue.
While enabling AAA VLAN can allow for more dynamic VLAN assignments, the core issue is related to overriding the default VLAN setting from ISE, which is handled by configuring the policy profile on the WLC.
Therefore,Option Ais the correct solution, as it ensures the WLC will allow the ISE server's VLAN assignment to override the default VLAN on the WLC, resolving the issue of incorrect VLAN assignment.
NEW QUESTION # 40
A managed service is rolling out advanced wireless infrastructure to support an expanding organization with diverse device types. The implementation requires integration of dynamic endpoint profiling for secure access and device classification. According to the baseline deployment with ISE policy sets, the engineering group must enforce access parameters based on device category rules. Which configuration action must be taken to fulfill the initiative?
Answer: A
Explanation:
Dynamic endpoint profiling in Cisco wireless networks is used to classify devices based on type, behavior, and attributes, enabling policy enforcement that adapts to device posture. In a deployment integrated with Cisco ISE, profiling groups are created to define rules and categories for device types such as smartphones, laptops, printers, and IoT devices. These profiling groups allow the wireless controller to map devices to the correct ISE policy sets dynamically, ensuring that security policies, VLAN assignments, and access controls are applied according to the device profile.
NEW QUESTION # 41
In an RF environment, what does high interference result in?
Answer: D
Explanation:
High interference in a wireless RF environment disrupts the predictable behavior of 802.11 channels. Interference comes from co-channel devices, neighboring APs, non-Wi-Fi sources like microwave ovens, cordless phones, or other electronic equipment operating in the same frequency band. When interference is present, the channel experiences fluctuating noise levels, increased frame collisions, and packet loss, all of which lead to inconsistent channel performance.
This inconsistency manifests as variable throughput, increased retransmissions, and irregular latency, directly impacting both client experience and AP scheduling decisions. While frame aggregation may fail under interference, the primary and systemic effect is the variability in channel quality, not the failure of aggregation alone. Scheduled contention access (option C) is an intentional protocol mechanism of EDCA or TXOP scheduling, which operates independently of interference levels. Extended coverage patterns (option D) are the result of antenna design or AP placement, not RF interference.
Cisco's Wireless Design Guide emphasizes that RF interference results in erratic channel behavior, requiring careful channel planning, power adjustment, and spectrum analysis using tools such as Cisco DNA Spaces or Spectrum Expert to restore consistent performance.
NEW QUESTION # 42
Refer to the exhibit. A retail business is deploying guest wireless across its remote branch locations. Each branch uses FlexConnect APs in local switching mode, and the central wireless LAN controller is configured with an ACL named CWA_REDIRECT. Cisco ISE is configured to return this ACL during the authentication process for central web authentication (CWA). However, when clients attempt to connect to the guest wireless LAN, they are added to the exclusion list.
Which configuration step resolves the connectivity issue?
Answer: C
Explanation:
The failure is caused by the redirect ACL not being available where enforcement occurs. In FlexConnect local switching, client data-plane handling occurs on the AP, so the CWA redirect ACL cannot exist only as a controller ACL or only as a policy-profile reference. Cisco states that the redirect ACL is a punt ACL and that, for FlexConnect local switching, the ACL must be predefined on the AP because the AAA server returns only the ACL name, not the ACL definition.
The exhibit shows Redirect ACL failure and EXCLUDE_PUNT_ACL_FAIL, which aligns with an AP-side punt/redirect ACL application failure. Cisco's Catalyst 9800 CWA configuration specifically requires the redirect ACL definition to be sent through the FlexConnect profile; in the GUI this is done under the Flex Profile Policy ACL tab by adding the ACL, enabling central web authentication, and applying the change. The equivalent CLI is wireless profile flex <profile> followed by acl-policy <acl-name> and central-webauth, after which the AP uses the ACL for client redirection. AP-Join profiles do not carry client redirect ACL policy, and adding the ACL only to the policy profile does not push it to FlexConnect APs for local switching.
NEW QUESTION # 43
Which benefit does enabling SNMP monitoring provide for Cisco wireless device management?
Answer: A
Explanation:
SNMP monitoring provides centralized visibility and event notification for Cisco wireless infrastructure. On Cisco Catalyst 9800 wireless controllers, SNMP traps are used to send alert messages from SNMP-enabled devices to an SNMP manager, and Cisco specifically documents wireless trap support for access points, clients, mesh, RF, rogue, mobility, RRM, and controller events. Cisco also states that AP-related traps such as crash, register, and no-radio-card events are enabled by default, and that configuring AP traps helps monitor AP status and troubleshoot issues.
Therefore, the direct operational benefit is alerts on access point status. SNMP is not limited to hardware-only metrics; it can expose client counts, joined AP counts, processor usage, memory usage, and wireless event notifications through supported OIDs and traps. Manual log review is the opposite of SNMP's purpose because traps automate notification to a network management system. Fragmented statistics are also incorrect because SNMP enables centralized polling and trap collection across managed devices.
NEW QUESTION # 44
......
You need to do something immediately to change the situation. For instance, the first step for you is to choose the most suitable 350-101 actual guide materials for your coming exam. so the 350-101 study materials is very important for you exam, because the 350-101 study materials will determine whether you can pass the 350-101 Exam successfully or not. We would like to intruduce you our 350-101 exam questions, which is popular and praised as the most suitable and helpful 350-101 study materials in the market.
350-101 Authorized Pdf: https://www.real4test.com/350-101_real-exam.html