DOWNLOAD the newest ExamBoosts 350-101 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=18iCFvHqGQQmDQ3N07IQAbi9LQWEk8iwt
The 350-101 practice test pdf contains the most updated and verified questions & answers, which cover all the exam topics and course outline completely. The 350-101 vce dumps can simulate the actual test environment, which can help you to be more familiar about the 350-101 Real Exam. Now, you can free download Cisco 350-101 updated demo and have a try. If you have any questions about 350-101 pass-guaranteed dumps, contact us at any time.
| Section | Objectives |
|---|---|
| Topic 1: Wireless Security | - 802.1X and authentication methods - WPA/WPA2/WPA3 security mechanisms |
| Topic 2: Troubleshooting and Monitoring | - Wireless connectivity troubleshooting - Performance monitoring and diagnostics |
| Topic 3: Wireless Fundamentals | - RF principles and radio frequency behavior - WLAN components and architecture basics - 802.11 standards overview |
| Topic 4: Mobility and Roaming | - Client roaming behavior - Mobility groups and handoff mechanisms |
| Topic 5: Cisco Wireless Architecture | - Lightweight Access Point (LAP) operation - Wireless LAN Controller (WLC) concepts |
| Topic 6: Wireless Deployment and Design | - Site survey and RF planning - Channel planning and interference mitigation |
ExamBoosts is an invisible assent that can give your advantage and get better life higher than your current situation and help you stand out among the average with the best and most accurate 350-101 study braindumps. For the great merit of our 350-101 Exam Guide is too many to count. Our experts have been dedicated in this area for more than ten years on compiling the content of our 350-101 training guide and keeping updating it to the latest.
NEW QUESTION # 88 
Refer to the exhibit. A network engineer must create a PSK WLAN that will be anchored to the DMZ. After this WLAN is created, users cannot connect to it. Based on the output from the RA trace, which action must the engineer take to resolve the issue?
Answer: C
Explanation:
The failure is occurring during WPA/WPA2 key management, not during mobility anchoring. The radioactive trace showsFailed to validate eapol mic. MIC mismatchfollowed byFailed to validate eapol key m2, which means the authenticator and supplicant derived different key material during the PSK handshake. Cisco's Catalyst 9800 client-connectivity troubleshooting maps this log pattern directly to a wrong password condition and lists the corrective actions as fixing the password on the endpoint or on the SSID/WLAN.
The11r MIC validation failedphrase does not automatically make 802.11r the root cause; it only shows that the failed MIC validation occurred while Fast Transition key logic was in use. Disabling 802.11r would be a workaround only for client capability or FT interoperability issues, but the trace points to PSK mismatch.
Removing the anchor WLC would break the intended DMZ anchoring design, and matching WLANs on foreign and anchor is required for anchor deployments, but it would not produce this EAPOL M2 MIC failure.
The correct remediation is to ensure the client-entered PSK matches the WLAN PSK. Reference topics: WPA
/WPA2-PSK authentication, EAPOL 4-way handshake, Catalyst 9800 radioactive trace analysis, and client connectivity troubleshooting.
NEW QUESTION # 89
Refer to the exhibit.
A wireless controller is deployed at a branch location to facilitate guest client connectivity. A network engineer configures one WLAN using Web authentication and activates web-based method to align with company security policies. Which configuration enables client authentication for this WLAN?
Answer: A
Explanation:
The command that enables web-based client authentication on the WLAN issecurity web-auth. Cisco's Catalyst 9800 Web-Based Authentication guide shows the WLAN configuration workflow: enter WLAN configuration mode, disable WPA security for the open Layer 2 guest WLAN, then "Enable web authentication for WLAN" usingsecurity web-auth. Cisco then applies the authentication list and parameter map withsecurity web-auth authentication-list ...andsecurity web-auth parameter-map ..., which refine the WebAuth method and portal behavior after WebAuth itself is enabled.
Cisco's LDAP authentication example mirrors the exhibit exactly:wlan webauth 2 webauth, removal of WPA
/802.1X Layer 2 security,security web-auth,security web-auth authentication-list ldapauth, andsecurity web- auth parameter-map global. Option B only creates or enters the WLAN profile with WLAN ID 2 and SSID name. Options C and D disable WPA2 and 802.1X AKM; they do not authenticate clients. Reference topics:
Client Connectivity Configuration - guest WLAN authentication, WebAuth, Layer 3 security, authentication lists, parameter maps, and Catalyst 9800 WLAN security configuration.
NEW QUESTION # 90
Which feature enables fast secure roaming in a wireless network?
Answer: B
Explanation:
Fast secure roaming in enterprise wireless networks is achieved using the 802.11r standard, also known as Fast BSS Transition (FT). 802.11r allows clients to authenticate with a new access point (AP) before disassociating from the current AP, significantly reducing the time required for the re-authentication process.
This pre-authentication mechanism ensures that client sessions, such as voice or video calls, are maintained seamlessly when moving between APs in a mobility domain. DCA (Dynamic Channel Assignment) optimizes channel selection but does not affect roaming speed. 802.11ax enhances overall throughput and spectral efficiency but does not directly provide fast roaming. MIMO (Multiple Input Multiple Output) improves signal reliability and capacity but is unrelated to the authentication handoff process. Cisco Wireless Core Technologies highlight the deployment of 802.11r in conjunction with PMK caching and Opportunistic Key Caching (OKC) to further accelerate roaming in high-density environments. Implementing 802.11r is critical for environments requiring minimal packet loss and low latency during client movement, such as voice over Wi-Fi or real-time video applications. Reference topics:Client Connectivity Configuration - 802.11r, Fast BSS Transition, secure fast roaming, mobility domains, PMK caching.
NEW QUESTION # 91
A hotel wants to provide guests with wireless connectivity via a captive portal using a Cisco 9800 WLC. The solution must meet these requirements:
* Ensure that guests are redirected to a custom web page for login and after authentication must have only internet access.
* The guest SSID must not require a password and must be visible to all clients.
* Network segmentation between staff and guests is required at the VLAN level.
What must the IT team configure on the WLAN?
Answer: C
Explanation:
Central Web Authentication is the correct design for an open guest SSID that redirects users to a captive portal before allowing network access. Cisco describes CWA as a guest-redirection method where the redirect URL and redirect ACL are centrally controlled and communicated to the WLC through RADIUS, with the external authentication system handling the login workflow. On a Catalyst 9800 WLAN, Cisco's configuration flow for Central Web Authentication requires AAA/ACL configuration, including the AAA server list and an ACL tied to the WLAN so client access can be controlled before and after authentication.
Option D is the only answer that satisfies all requirements: captive portal redirection, post-authentication restriction to Internet-only access, and policy enforcement through ACLs. VLAN-level segmentation is implemented through the WLAN policy profile, which maps guest clients to the guest VLAN rather than the staff VLAN. WPA2-PSK is invalid because the guest SSID must not require a password. A local web server alone does not enforce Internet-only authorization or staff-network isolation. mDNS is unrelated to captive portal authentication or guest segmentation. Reference topics:Guest WLAN design, Central Web Authentication, Catalyst 9800 policy profiles, ACL enforcement, VLAN segmentation, and captive portal client onboarding.
NEW QUESTION # 92
An administrator configures WPA3-Personal security on a WLAN. Which authentication method is introduced with this standard?
Answer: D
Explanation:
WPA3-Personal introduces Simultaneous Authentication of Equals (SAE), replacing the WPA2 pre-shared key handshake. SAE improves resistance against offline dictionary attacks and enhances wireless security. PEAP and EAP-TLS are enterprise authentication methods, while LEAP is an outdated Cisco protocol.
NEW QUESTION # 93
......
There are three formats of ExamBoosts practice material. Anyone can try a free demo to assess the quality of our Cisco product before buying. The Implementing and Operating Cisco Wireless Core Technologies (350-101) PDF file of actual questions, web-based Implementing and Operating Cisco Wireless Core Technologies practice exam, and desktop practice test are three formats of ExamBoosts. The 350-101 PDF Questions are printable which means you can do off-screen study.
350-101 Download: https://www.examboosts.com/Cisco/350-101-practice-exam-dumps.html
P.S. Free 2026 Cisco 350-101 dumps are available on Google Drive shared by ExamBoosts: https://drive.google.com/open?id=18iCFvHqGQQmDQ3N07IQAbi9LQWEk8iwt