What's more, part of that PassReview VNX301 dumps now are free: https://drive.google.com/open?id=1-IIRb9AxxFhp8pdA-3QW3PGcAAL7ddXs
According to the different demands from customers, the experts and professors designed three different versions for all customers. According to your need, you can choose the most suitable version of our Versa Certified SD-WAN Specialist (VNX300) guide torrent for yourself. The three different versions have different functions. If you decide to buy our VNX301 Test Guide, the online workers of our company will introduce the different function to you. You will have a deep understanding of the three versions of our VNX301 exam questions. We believe that you will like our products.
| Certification Vendor: | Versa Networks |
|---|---|
| Exam Name: | Versa Certified Administrator - SD-WAN Specialist (VNX301) |
| Exam Number: | VNX301 |
| Available Languages: | English |
| Real Exam Qty: | Approx. 47 |
| Related Certifications: | Versa Certified SD-WAN Associate (VNX100) |
| Exam Format: | Multiple-choice, Scenario-based questions |
| Recommended Training: | Versa Advanced Services (V-ASERV) Versa SD-WAN Configuration and Administration (V-SDCA) |
| Exam Registration: | Versa Certification Official Page |
| Sample Questions: | Versa Networks VNX301 Sample Questions |
| Exam Way: | Online proctored or authorized testing center |
| Pre Condition: | Recommended: Versa Certified SD-WAN Associate (VNX100) or equivalent SD-WAN experience |
| Official Syllabus URL: | https://academy.versa-networks.com/certification-vnx300/ |
One of features of VNX301 training materials of us is that we can help you pass the exam just one time, and we also pass guarantee and money back guarantee for you fail to pass the exam. You just need to send your failure scanned to us, and we will give you full refund. In addition, VNX301 exam dumps contain both questions and answers, which can help you have a quickly check after you finish your practice. We also have online and offline chat service stuff, they possess the professional knowledge about the VNX301 Training Materials, if you have any questions just contact us.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION # 48
While troubleshooting the SD-WAN data path, you run show vsf tunnel access-circuits ... detail and see the following encapsulation chain: VMLH, MPLS-over-GRE, IPsec-ESP, and VXLAN. What does this output primarily confirm?
Answer: A
Explanation:
The correct answer is B . Versa's SD-WAN data-path troubleshooting documentation shows that show vsf tunnel access-circuits ... detail can display the access-circuit state and encapsulation chain used for tunnel forwarding. In the example, the output lists multiple encapsulations, including VMLH , MPLS-over-GRE , IPsec-ESP , and VXLAN . It also shows transport details such as source IP, destination IP, UDP transport, tunnel MTU, SPI values, and SLA state.
This confirms that the VOS data plane has built the SD-WAN tunnel encapsulation stack required to forward overlay traffic across the underlay. IPsec-ESP in the chain indicates encrypted tunnel handling, while VXLAN and other encapsulation components are part of the SD-WAN overlay forwarding structure.
The output does not indicate simple bridging, plain-text-only GRE, or bypass of the VOS data plane.
Instead, it proves that the packet path is being processed through the VOS tunnel forwarding framework and that the administrator is looking at the SD-WAN access-circuit tunnel state.
NEW QUESTION # 49
Examine the exhibit below.
You are deploying Versa Secure SD-WAN and require high availability for the Versa Directors. You configured the Versa Director high availability parameters shown in the exhibit. With the parameters shown, which two statements are true? (Choose two.)
Answer: A,D
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From Versa Networks SDWAN Topics:
The correct answers are B and D . In the exhibit, Enable Auto Switchover is not selected. However, the Failover Timeout value is configured as 300 seconds . Versa Director HA documentation states that the Failover Timeout is the timeout period before the standby Director node can promote itself to become the active Director node. Therefore, if the active or primary Director fails, the backup Director can automatically assume the active role after the failover condition and timeout are met.
The important distinction is that Auto Switchover controls revertive behavior after recovery, not the initial standby takeover during failure. Versa documentation explains that Director HA is non-revertive by default.
This means that when the designated master or primary Director comes back online after recovery, it is not automatically promoted back to active unless automatic switchover is enabled. To make the designated active Director automatically reclaim the active state after recovery, Enable Auto Switchover must be selected and the Auto Switchover Timeout must expire.
NEW QUESTION # 50
A tenant has two internet circuits and one LTE backup circuit. The forwarding profile lists the internet circuits with priority 1 and LTE with priority 2. The next-hop selection method is Load Balance. What is the expected behavior while both internet circuits are healthy?
Answer: A
Explanation:
The correct answer is A . In Versa SD-WAN forwarding profiles, next-hop priorities define which circuits are preferred. When the Load Balance next-hop selection method is used and two circuits share the same priority, sessions can be distributed across those equal-priority paths as long as they are usable and SLA- compliant. A lower priority number represents a more preferred group than a higher priority number.
Therefore, two circuits with priority 1 are preferred over LTE with priority 2 .
In this scenario, both internet circuits are healthy and both have priority 1. The VOS device should load- balance sessions across those two circuits. LTE remains available as a lower-priority backup path and would normally be considered only when the preferred internet circuits are unavailable, fail path checks, or no longer meet the applicable policy conditions.
Traffic is not replicated because replication is a separate feature and not implied by Load Balance. The branch does not drop traffic while valid paths exist. LTE is not preferred merely because its priority number is higher; in path selection, priority 1 is preferred over priority 2.
NEW QUESTION # 51
You are troubleshooting a branch that cannot form SD-WAN overlay tunnels. The branch has WAN interfaces up, but you suspect remote endpoint objects were not learned. Which VSM command should you use to verify whether remote site objects were learned from BGP or from configuration?
Answer: A
Explanation:
The correct answer is A . Versa data-path troubleshooting documentation gives a specific VSM control-plane workflow for checking SD-WAN tunnel objects. After connecting to the VSM daemon, administrators can use show vsm p2mp local-tunnel-sites 0 to inspect local site objects. To check whether remote site objects were learned from BGP or from configuration , Versa instructs administrators to issue show vsm p2mp tunnel-remote-endpoint tenant < tenant-id > on the VSM control plane.
This command is highly relevant when local WAN interfaces are operational, but overlay tunnel formation is incomplete. It shows remote endpoints such as Controllers, hubs, or branches, along with site type, site name, branch ID, tenant ID, remote WAN link information, and tunnel state-related fields.
show interfaces brief confirms interface state and IP addresses, but it does not show learned remote SD- WAN endpoint objects. CGNAT summary is unrelated to tunnel endpoint learning. System storage is useful for disk checks, but not for SD-WAN overlay endpoint troubleshooting.
NEW QUESTION # 52
Examine the exhibit below.
You are onboarding the SOLDEU-R2 branch device using the staging script. You cannot get a Versa- Provider-Controller-VR IP address assigned, indicating that the IPsec tunnel to the corrector has not come up.
You verified that the cables have been connected to the correct ports.
What has caused this issue?
Answer: B
Explanation:
The issue is caused by specifying the incorrect WAN port in the staging script. In the exhibit, the SOLDEU- R2 branch is physically connected to the Internet cloud through vni-0/0 , while vni-0/1 is shown as the inter- device link toward SOLDEU-R1. However, the show interfaces brief output shows that the WAN IP address
192.168.122.121/24 has been assigned to vni-0/1.0 , not to the Internet-facing interface. Since the cables are confirmed to be connected correctly, the mismatch must be in the staging script interface selection, not in the cabling.
Versa documentation states that during SD-WAN staging, the branch establishes an IKE session with the Controller, and after that the Controller assigns an IP address to the branch device. Versa troubleshooting guidance also states that after transport connectivity to the Controller is established, the branch forms IKE-based IPsec connectivity, and if this succeeds, the ptvi interface toward the Controller comes up. If IKE/IPsec fails, the ptvi interface remains down. Because the staged WAN IP is placed on the wrong VNI interface, the branch cannot reach the Controller over the intended Internet transport, so the Controller tunnel does not come up.
NEW QUESTION # 53
......
VNX301 Free Test Questions: https://www.passreview.com/VNX301_exam-braindumps.html
DOWNLOAD the newest PassReview VNX301 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1-IIRb9AxxFhp8pdA-3QW3PGcAAL7ddXs