If you choose our 300-110 study materials and use our products well, we can promise that you can pass the 300-110 exam and get the 300-110 certification. Then you will find you have so many chances to advance in stages to a great level of social influence and success. Our 300-110 Guide Torrent can also provide all candidates with our free demo, in order to exclude your concerts that you can check our 300-110 exam questions. We believe that you will be fond of our 300-110 learning guide.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Wired and Wireless Infrastructure | 30% | - Logical infrastructure requirements - Physical infrastructure requirements - Design high-density wireless networks - Design for data, voice, video, location - Design wireless bridging (mesh) - Design radio management |
| Topic 2: WLAN High Availability | 20% | - Design AP high availability - Design controller high availability |
| Topic 3: Wireless Site Survey | 25% | - Collect design requirements and evaluate constraints - Material attenuation and its design effects - Planning tools and network metrics evaluation - Layer 1 site survey analysis - Predictive site survey - Pre-deployment site survey - Post-deployment site survey |
| Topic 4: Mobility | 25% | - Validate mobility tunneling - Optimize client roaming - Design mobility groups - Site Tags |
>> 300-110 Valid Exam Dumps <<
As you may find on our website, we will never merely display information in our 300-110 praparation guide. Our team of experts has extensive experience. They will design scientifically and arrange for 300-110 actual exam that are most suitable for users. In the study plan, we will also create a customized plan for you based on your specific situation. And our professional experts have developed three versions of our 300-110 Exam Questions for you: the PDF, Software and APP online.
NEW QUESTION # 35
A wireless engineer is preparing for a meeting with a customer to discuss a new wireless network design. The customer is a company that develops code and occupies a three-story building. Which two information points does a pre-site survey questionnaire contain? (Choose two.)
Answer: A,C
Explanation:
A pre-site survey questionnaire is used to gather information before the physical survey begins, helping to define design requirements. The two most important information points it should contain are the access point density required and the applications that will run over the wireless network. Access point density (Option C) must be understood early because it depends on the number and types of users in each area, directly influencing the survey approach and AP placement strategy. Applications (Option E) are critical because they define the QoS requirements - a company developing code may run video conferencing, large file transfers, and real-time collaboration tools, each with distinct bandwidth and latency requirements that shape the RF design criteria. The total number of existing APs (Option A) and the current controller model (Option D) are inventory questions, not design requirement inputs. Client device types (Option B) are important but are a subset of the application question - applications drive the specific device capability requirements. Reference:
WLSD Study Guide - Pre-Site Survey Requirements Gathering, Customer Questionnaire, Design Requirements Definition.
NEW QUESTION # 36
A hospital has a Cisco Catalyst 9800 Series Wireless Controller in an SSO solution deployed in the primary data center. The hospital plans to increase redundancy in the wireless environment.
Management decides to deploy an extra Catalyst 9800 WLC offsite to another data center on a different subnet. A WAN link connects the data centers with a firewall at both ends. Which two design approaches must the engineer take to ensure that the APs can fail over? (Choose two.)
Answer: B,E
Explanation:
For APs to be able to fail over between a primary SSO pair in one data center and a standalone WLC in a remote data center connected via WAN with firewalls, two design requirements must be met. First, a mobility tunnel must be created between the wireless controllers (Option A). The mobility tunnel enables the controllers to exchange mobility control messages, peer information, and eventually AP context when failover occurs. Without the mobility tunnel, the remote WLC is not recognized as a valid failover target by the APs through the mobility domain. Second, UDP ports 16666 and 16667 must be open through the firewalls between the controllers (Option D).
UDP port 16666 is used for mobility control traffic and UDP port 16667 is used for mobility data traffic -- both must be permitted through the firewalls at both data centers for the mobility tunnel to establish and function.
NEW QUESTION # 37
A school deploys a Cisco wireless infrastructure in its classrooms to support a high density of mobile devices.
The network administrator wants to bond channels in groups of two and only allow APs to send 802.11 management frames at 24 Mbps. What should be included in the design to accomplish this objective?
Answer: B
Explanation:
For a high-density classroom deployment using 5 GHz with channel bonding in groups of two (40 MHz channels), the correct configuration is to set the channel width for 802.11a (5 GHz) to 40 MHz and set the 24 Mbps data rate to Mandatory. Channel bonding refers to combining two adjacent 20 MHz channels into a single 40 MHz channel, doubling the channel width. Since the requirement specifies 5 GHz operation (where high-density design is appropriate), this must be applied to the 802.11a radio profile, not 802.11b (which operates only on 2.4 GHz). Setting 24 Mbps as Mandatory ensures that APs transmit management frames (beacons, probe responses, and other control frames) only at 24 Mbps - this is how the ' only allow APs to send 802.11 management frames at 24 Mbps ' requirement is implemented. Setting it as Supported (Options B and D) would allow the AP to use lower rates for management frames. Options A and D incorrectly target
802.11b, which does not support 40 MHz channels. Reference: WLSD Study Guide - High-Density WLAN Design, 802.11a Channel Configuration, Data Rate and Channel Width Settings.
NEW QUESTION # 38
An engineer is finalizing the design for a WLAN dedicated to wireless VoIP handsets. Which setting should be applied to this WLAN, and why?
Answer: D
Explanation:
Band Select works by suppressing 2.4 GHz probe responses to dual-band capable clients, deliberately withholding replies so the client is nudged toward discovering the 5 GHz radio instead. That suppression introduces delay into the probe and discovery process, which is harmless for a laptop associating once at the start of the day but damaging for a handset attempting to find a roam target while a call is in progress. Cisco's guidance is therefore to disable Band Select on voice WLANs and instead steer handsets to 5 GHz through client configuration or by not enabling the SSID on 2.4 GHz at all. Client Load Balancing should also be disabled on voice WLANs for the same class of reason - it rejects association attempts to encourage the client toward a different AP, which can block a roaming handset from joining the AP it actually needs. Passive Client mode addresses devices that do not send traffic until polled, such as certain industrial controllers, and is unrelated to handset roaming.
NEW QUESTION # 39
A network design supports data and voice in 2.4 GHz and 5.0 GHz. The design must support asset tracking without affecting the existing design. Which action must be taken?
Answer: C
Explanation:
Cisco ' s WLAN location and asset tracking architecture (based on Cisco Spaces or legacy Cisco MSE/CMX) relies on the ability to receive and measure the RF signal from tagged assets at multiple APs simultaneously.
For accurate location determination using triangulation or trilateration algorithms, a minimum of three APs must receive the tag ' s signal with sufficient RSSI. Monitor mode APs are dedicated to passive RF listening
- they do not transmit client-serving SSIDs and focus their full radio attention on scanning all channels for signal measurement. Placing monitor mode APs specifically on the perimeter of an asset tracking area provides the spatial diversity and boundary detection capability needed to accurately triangulate assets throughout the interior, without requiring any modifications to the existing data/voice serving APs. Adding monitor mode APs at the perimeter as an overlay ensures the existing 2.4 GHz and 5 GHz voice/data design is entirely undisturbed. Adding local mode APs (Option B) would serve clients and compete for channel capacity. Grouping APs closer (Option C) reduces capacity and increases co-channel interference. Increasing transmit power (Option D) worsens hidden node conditions without improving location accuracy. Reference:
WLSD Study Guide - Cisco Location Services, Monitor Mode APs, Asset Tracking and WLAN Overlay Design.
NEW QUESTION # 40
......
PDF version of 300-110 training materials is legible to read and remember, and support printing request, so you can have a print and practice in papers. Software version of practice materials supports simulation test system, and give times of setup has no restriction. Remember this version support Windows system users only. App online version of 300-110 Exam Questions is suitable to all kinds of equipment or digital devices and supportive to offline exercise on the condition that you practice it without mobile data.
Trustworthy 300-110 Exam Content: https://www.vceprep.com/300-110-latest-vce-prep.html