API인증 API-SIEE시험을 패스하여 자격증을 취득하시면 찬란한 미래가 찾아올것입니다. API인증 API-SIEE인증시험을 패스하여 취득한 자격증은 IT인사로서의 능력을 증명해주며 IT업계에 종사하는 일원으로서의 자존심입니다. Itexamdump 의 API인증 API-SIEE덤프는 시험패스에 초점을 맞추어 제일 간단한 방법으로 시험을 패스하도록 밀어주는 시험공부가이드입니다.구매전API인증 API-SIEE무료샘플을 다운받아 적성에 맞는지 확인하고 구매할지 않할지 선택하시면 됩니다.
| 주제 | 소개 |
|---|---|
| 주제 1 |
|
| 주제 2 |
|
| 주제 3 |
|
| 주제 4 |
|
| 주제 5 |
|
| 주제 6 |
|
| 주제 7 |
|
| 주제 8 |
|
| 주제 9 |
|
API인증 API-SIEE시험에 도전하고 싶으시다면 최강 시험패스율로 유명한Itexamdump의 API인증 API-SIEE덤프로 시험공부를 해보세요. 시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다. API 인증API-SIEE시험출제경향을 퍼펙트하게 연구하여Itexamdump에서는API 인증API-SIEE시험대비덤프를 출시하였습니다. Itexamdump제품은 고객님의 IT자격증 취득의 앞길을 훤히 비추어드립니다.
질문 # 107
In a Class I hazardous area, what is the maximum distance from an enclosure, containing arcing devices should a conduit seal be located?
정답：D
설명：
The correct answer isD. InClass I hazardous locations, conduit seals are required near enclosures that containarcing, sparking, or heat-producing devicesin order to prevent the passage of flammable gases or vapors through the conduit system and to limit the spread of an internal explosion. UnderNFPA 70, this seal must be installedas close as practical to the enclosureandnot more than 18 inches 45.72 cm away.
This requirement is important because threaded rigid metal conduit systems can otherwise become a path for hazardous vapors to migrate from one enclosure or area to another. If an ignition occurs inside the enclosure, the sealing fitting helps contain pressure effects and reduces flame propagation through the raceway. From an API source inspection and quality surveillance standpoint, the inspector must verify that hazardous-location installation details, including sealing fittings, match code requirements, approved drawings, and area- classification needs. Seal placement is therefore not just a field convenience item; it is a critical safety feature affecting equipment acceptability in classified service.
Options A, B, and C do not match the NFPA requirement. The maximum permitted distance is18 inches.
질문 # 108
According to API 541, during a witness or observed test of a 500 hp kW induction motor, the purchaser shall have the right to observe all the following, which may occur due to the expected or unexpected part or event of the test except:
정답：B
설명：
The correct answer isC. disassembly of the rotor. In API 541 witness or observed testing practice for large induction motors, the purchaser has the right to observe activities that may become necessary as part of the test process, includingdismantling of the motor, inspection of the motor, and reassembly of the motor. These actions are directly related to investigating test issues, verifying construction, checking condition after a test event, and confirming that the motor is properly restored following inspection.
The rotor itself is normally treated as a major internal component of the motor, butdisassembly of the rotoris not a standard purchaser observation right described in the same way. A rotor may beremovedor examined if necessary, but "disassembly of the rotor" suggests taking apart the rotor assembly itself, which is not the expected wording or normal scope of witness rights during standard API 541 test observation. For source inspection purposes, this distinction matters because inspectors must recognize the difference between observation of motor-level teardown and reassembly versus unnecessary or nonstandard internal component disassembly. Therefore,Cis the exception.
질문 # 109
According to NFPA 70, an insulated conductor used within a switchboard or switchgear shall be rated not less than the voltage applied to it and:
정답：A
설명：
The correct answer isBbecause NFPA 70 requires conductors used insideswitchboards and switchgearto be suitable not only for the circuit voltage, but also for safe operation within enclosed electrical assemblies where fault energy, heating, and fire propagation are important concerns. In this context,flame-retardant insulationis required so that internal wiring does not readily support combustion or allow fire to spread inside the equipment lineup. This is especially important during abnormal conditions such as arcing, overheating, insulation failure, or short-circuit events.
Within the API Guide for Source Inspection and Quality Surveillance of Electrical Equipment,switchgearis one of the major covered equipment categories for source inspection and quality surveillance activities. The guide emphasizes that source inspectors must verify compliance with governing specifications, referenced codes, approved drawings, and applicable industry standards during manufacturing and inspection. It also states that the guide focuses onsource inspection and quality surveillance activitiesrather than detailed design engineering alone. Therefore, when inspecting switchgear internal wiring, confirming that conductor insulation isproperly voltage-rated and flame retardantis the correct code-based requirement.
질문 # 110
In hazardous classified locations on process skids, electrical and instrumentation equipment installed in the classified area must be:
정답：B
질문 # 111
According to API 541, for the bearing temperature rise test, motor bearing stable temperature is defined:
정답：D
설명：
The correct answer isC. In API 541, during thebearing temperature rise test, a motor bearing is considered to have reachedstable temperaturewhen thetemperature rise does not increase by more than 1°C over a period of one hour. This definition is important because the acceptance of the test depends on showing that the bearing temperature has effectively leveled off under the test conditions rather than still trending upward. If temperature continues to rise beyond that limit, the test has not yet reached thermal stability and the result cannot be treated as final.
This criterion is used in factory testing of large motors to confirm acceptable bearing thermal performance, lubrication condition, mechanical fit, and overall operating behavior at the test load and speed. In source inspection, the inspector verifies not only the final measured bearing temperatures, but also that thetest duration, stabilization criterion, instrumentation, and recorded resultscomply with the governing standard and approved procedures. A 30-minute interval is not the API 541 stability definition, and a 2°C rise in one hour is too permissive. Therefore, the correct API 541 requirement isa rise of not more than 1°C in one hour, which makesoption Cthe verified answer.
질문 # 112
......
최근들어 API API-SIEE시험이 큰 인기몰이를 하고 있는 가장 핫한 IT인증시험입니다. API API-SIEE덤프는API API-SIEE시험 최근문제를 해석한 기출문제 모음집으로서 시험패스가 한결 쉬워지도록 도와드리는 최고의 자료입니다. API API-SIEE인증시험을 패스하여 자격증을 취득하면 보다 쉽고 빠르게 승진할수 있고 연봉인상에도 많은 도움을 얻을수 있습니다.
API-SIEE최신버전 시험대비 공부문제: https://www.itexamdump.com/API-SIEE.html