New 800-150 Exam Notes & 800-150 Mock Test

DOWNLOAD the newest TestPassed 800-150 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=19mErzbP_PSaFrqb4I972uV4fU2_pT-Co

The Channel Partner Program Supporting Cisco Devices for Field Technicians 800-150 certification is a valuable credential earned by individuals to validate their skills and competence to perform certain job tasks. Your Supporting Cisco Devices for Field Technicians 800-150 Certification is usually displayed as proof that you’ve been trained, educated, and prepared to meet the specific requirement for your professional role.

Cisco 800-150 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Cisco Software: This section of the exam measures the skills of a Network Engineer and discusses Cisco’s software systems and licensing. It explains the difference between IOS install and bundle modes and gives an overview of different licensing models. Students learn how to manage Cisco software images, including backing up, transferring, and installing images via FTP, TFTP, or USB. It also covers how to handle configuration files to keep devices running properly and ensure smooth upgrades or replacements.
Topic 2
  • Cisco Hardware Replacement: This section of the exam measures the skills of a Technical Support Engineer and teaches how to safely and correctly replace Cisco hardware. It explains safety procedures such as creating safe work zones and handling electrostatic discharge. Students learn the step-by-step processes to replace a wide range of Cisco devices, from switches and routers to firewalls, UCS servers, and collaboration endpoints. It also covers configuring Cisco NX-OS software, including understanding operating modes, boot procedures, and password recovery, and introduces Cisco collaboration endpoint solutions like IP phones and video systems.
Topic 3
  • Common Service Tasks and Tools: This section of the exam measures the skills of a Technical Support Engineer and focuses on tasks commonly needed to manage Cisco devices. It explains how devices boot up, introduces common Cisco IOS commands, and identifies tools for file management. It shows how to confirm physical connections, remotely access devices, and connect to the console port. It also covers how to capture the status of a device, recover passwords, and replace devices by using proper tools. Students are also taught how to find serial numbers on Cisco equipment to assist with support and maintenance activities.
Topic 4
  • Networking Foundations: This section of the exam measures the skills of a Network Engineer and covers the basic building blocks of computer networking. It explains different types of networks like local area networks and wireless networks, and introduces lightweight wireless LANs. It describes the layers of communication models like the OSI model and TCP
  • IP stack, and explains how data moves across networks. It also discusses the physical cabling used in networks, such as Ethernet and fiber optics. Students will learn about network switching, IP addressing, subnetting, and routing at Layer 3. The section also introduces Cisco’s campus network devices, data center switches, UCS servers, and collaboration devices, describing their roles and functions in the network.
Topic 5
  • Cisco Infrastructure and Collaboration Infrastructure: This section of the exam measures the skills of a Collaboration Engineer and focuses on Cisco infrastructure devices, endpoints, and collaboration technologies. It introduces network devices, collaboration endpoints like IP phones and video systems, and explains on-premises collaboration deployments using tools like Cisco Unified Communications Manager. It also covers how video systems integrate into collaboration environments and highlights Cisco’s cloud services for enterprise communication, including Webex Meetings, Webex Teams, and hosted collaboration solutions.

>> New 800-150 Exam Notes <<

Cisco 800-150 Mock Test | 800-150 Test Free

Some people prefer books, some check videos, and some hire online tutors, to clear the 800-150 exam. It all depends on you what you like the most. If you learn better by books, go for it but if you are busy, and don't have much time to consult a list of books for studying, it’s better to get the most probable Supporting Cisco Devices for Field Technicians (800-150) exam questions. We are sure that you will learn well and can crack Cisco 800-150 exam easily.

Cisco Supporting Cisco Devices for Field Technicians Sample Questions (Q46-Q51):

NEW QUESTION # 46
Which two settings are standard Cisco console connections when configuring a terminal emulator to connect to the console port of a Cisco switch? (Choose two.)

Answer: B,C

Explanation:
When configuring a terminal emulator (such as PuTTY, Tera Term, or HyperTerminal) to connect to the console port of a Cisco switch, the standard settings are as follows:
* Speed (baud rate): 9600This is the default transmission speed for Cisco console ports, ensuring compatibility across various devices.
* Data bits: 8This setting specifies that each character transmitted consists of 8 data bits, which is standard for most serial communications.
* Parity: NoneNo parity bit is used, meaning there is no additional error-checking bit appended to each character.
* Stop bits: 1One stop bit indicates the end of a character transmission.
* Flow control: NoneNo flow control is employed, allowing continuous data transmission without hardware or software-based pausing.
Therefore, optionsC (Speed: 9600)andD (Data bits: 8)are correct. Options A (Stop bits: 2), B (Flow control:
Hardware), and E (Parity: Even) deviate from the standard settings and may result in communication issues if configured.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Device Configuration and Verification


NEW QUESTION # 47
Drag and drop the steps from the left into order to capture the status of a Cisco device.

Answer:

Explanation:

Explanation:
This procedure is taught in theFLDTEC courseunder theDevice Configuration and Verificationsection and reflects standard field technician workflows:
* Connect to the console portusing a console cable and terminal software (like PuTTY or Tera Term).
* Access the CLIof the Cisco device by logging in via the console session.
* Create a log fileor enable logging in the terminal emulator to begin capturing output.
* Check the router statususing commands such as show running-config, show ip interface brief, or show version.
* Save the output filefrom the terminal emulator for documentation, troubleshooting, or escalation.
This logical flow ensures accurate diagnostics and traceability during field support operations.


NEW QUESTION # 48
How many bits are borrowed from the default host portion of the address to create subnets in a Class B network with a subnet mask 255.255.255.0?

Answer: D

Explanation:
In a Class B network, the default subnet mask is 255.255.0.0, which allocates:
* 16 bits for the network portion
* 16 bits for the host portion
When the subnet mask is changed to255.255.255.0, it becomes:
* 24 bits for the network portion
* 8 bits for the host portion
This indicates that8 bitshave been borrowed from the host portion to create additional subnets. Borrowing bits allows for the division of the original network into smaller sub-networks, enhancing organization and security within the network.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco IOS Software Basics


NEW QUESTION # 49
Which scenario would result in a speed mismatch when configuring Ethernet devices with different speed settings?

Answer: D

Explanation:
A speed mismatch occurs when two connected Ethernet devices are configured to operate at different speeds.
In scenario A, one device is manually set to 1 Gbps, while the other is set to 100 Mbps. Since both ends are hard-coded to different speeds, they cannot successfully negotiate a common speed, leading to a mismatch and resulting in a failed or unstable link.
In contrast, scenario B, where both ends are manually set to the same speed, ensures compatibility and stable communication. Scenario C can lead to a duplex mismatch rather than a speed mismatch; the auto-negotiating end may default to half-duplex if it cannot determine the duplex setting of the manually configured end.
Scenario D is less common; if auto-negotiation fails, devices may revert to their lowest common speed, but this typically results in reduced performance rather than a complete mismatch.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Troubleshooting Methodologies


NEW QUESTION # 50
What is the primary advantage of installing and deploying Cisco UCS E-Series servers in branch office routers?

Answer: C

Explanation:
Cisco UCS E-Series serversare integrated, blade-style compute modules that can be installed insideCisco ISR(Integrated Services Routers). Their primary advantage is toprovide local compute resources in branch officeswithout needing a full data center environment.
This enables:
* Hosting of virtual machines or applications locally
* Reduced latency for edge computing
* Lowered dependency on central data center resources
These servers are ideal for runningbranch-office workloads, virtualization, or edge analytics, allowing enterprises to deploy scalable compute capabilities closer to the data source.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco Equipment and Related Hardware


NEW QUESTION # 51
......

By unremitting effort and studious research of the 800-150 practice materials, they devised our high quality and high effective 800-150 practice materials which win consensus acceptance around the world. They are meritorious experts with a professional background in this line and remain unpretentious attitude towards our 800-150 practice materials all the time. They are unsuspecting experts who you can count on.

800-150 Mock Test: https://www.testpassed.com/800-150-still-valid-exam.html

P.S. Free & New 800-150 dumps are available on Google Drive shared by TestPassed: https://drive.google.com/open?id=19mErzbP_PSaFrqb4I972uV4fU2_pT-Co