Fortinet NSE 5 - FortiSwitch 7.6 Administrator Questions are Very Beneficial for Strong Preparation. The top objective of TestSimulate is to offer real Fortinet Exam NSE5_FSW_AD-7.6 exam questions so that you can get success in the NSE5_FSW_AD-7.6 actual test easily. The Fortinet Exam Fortinet NSE 5 - FortiSwitch 7.6 Administrator valid dumps by the TestSimulate are compiled by a team of experts. We have hired these NSE5_FSW_AD-7.6 Exam professionals to ensure the top quality of our product. This team works together and compiles the most probable Fortinet NSE 5 - FortiSwitch 7.6 Administrator exam questions. So you can trust Fortinet Exams Practice questions without any doubt.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
>> Exam NSE5_FSW_AD-7.6 Format <<
The candidates can test themselves for the Fortinet NSE 5 - FortiSwitch 7.6 Administrator exam day by attempting the Fortinet NSE 5 - FortiSwitch 7.6 Administrator NSE5_FSW_AD-7.6 practice test on the software. There is preparation material available on the NSE5_FSW_AD-7.6 Practice Exam software by TestSimulate to study for the Fortinet NSE5_FSW_AD-7.6 test.
NEW QUESTION # 93
Refer to the exhibit.
Port24 is the only uplink port connected to the network where you need access to FortiSwitch management services. However, FortiSwitch is not accessible on its management interface with IP address 10.0.13.3.
Based on the configuration shown in the exhibit, which two actions should you take to fix the issue and access FortiSwitch? (Choose two answers)
Answer: A,D
Explanation:
According to theFortiSwitchOS 7.6 Administration Guide (Page 320), management traffic on a FortiSwitch is associated with a specific logical interface, which in this case is the"internal"interface. The exhibit shows that the"internal"interface is configured onVLAN 4094(both as native and allowed). This means that for any management traffic (such as HTTPS, SSH, or SNMP) to reach the switch CPU, it must be able to traverse the physical uplink on VLAN 4094.
However, the configuration forport24(the uplink) is currently restricted. It is set withnative VLAN 100and an allowed-vlans list that only includes100 and 200. Because VLAN 4094 is not included in the allowed list of port24, all frames belonging to the management VLAN (4094) are dropped by the switch's ingress/egress filters on the uplink.
To resolve this and restore management access, the administrator has two valid configuration paths based on the provided options:
* Option B:Change thenative VLAN on port24 to VLAN 4094. By making 4094 the native VLAN, untagged management traffic can traverse the port, effectively allowing the "internal" interface to communicate with the network.
* Option D:Add VLAN 4094 to the allowed VLANs on port24. This ensures that VLAN 4094 is no longer filtered out, allowing management frames to pass through the uplink while maintaining the current native VLAN for other traffic.
Option C is irrelevant as removing a working VLAN (200) does not help the management traffic. While Option A describes an alternate architectural approach (moving management into an already-allowed VLAN), Options B and D represent the direct fixes for the mismatch described in the 7.6 administration documentation.
NEW QUESTION # 94
Refer to the exhibit.
The FortiSwitch CLI output of the diagnose switch-controller switch-info poe summary command for the switch Access-1 is shown. It shows that two ports have Power over Ethernet (PoE) enabled and are already in use. What is the most important consideration if you want to connect additional PoE devices to FortiSwitch?
(Choose one answer)
Answer: D
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, the primary physical constraint when deploying PoE devices is the total power capacity of the switch ' s internal power supply unit (PSU). The provided exhibit shows the PoE status forAccess-1, highlighting three critical metrics:
theUnit Power Budget (185.00W), the currentUnit Power Consumption (12.70W), and theUnit Guard Band.
TheUnit Power Budgetrepresents the maximum amount of power the switch can provide to all connected Powered Devices (PDs) simultaneously. As more devices (such as access points, VoIP phones, or cameras) are connected, the cumulative power draw increases. The most important consideration is ensuring that thetotal PoE consumption does not exceed this budget. If the budget is exceeded, the switch will stop providing power to new devices or, depending on the configuration, may shut down lower-priority ports to protect the system hardware.
In this specific exhibit, theUnit Poe Power Modeis set toPriority Based. This means that if the power consumption approaches the budget limit, the switch will use the configured port priorities (seen as " Low " for port1 and port2) to decide which devices to keep powered. TheGuard Band(set to a dynamic value) also plays a role by reserving a small amount of power to handle spikes when devices initialize, further emphasizing that the power budget is a hard limit that must be actively managed by the administrator.
NEW QUESTION # 95
Refer to the exhibit.
FortiSwitch 802.1X port security configuration is shown. A user connects their laptop to the port and attempts to authenticate using 802.1X, but enters the wrong credentials multiple times. What will the result to the device be? (Choose one answer)
Answer: B
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, 802.1X port security allows administrators to define specific actions based on the outcome of an authentication attempt. The configuration exhibit shows a security policy named "Students" with two specialized VLAN assignments enabled: aGuest VLANand anAuthentication fail VLAN.
In FortiSwitchOS 7.6, these two settings serve distinct purposes based on the client's behavior:
* Guest VLAN (Option C):This is used when a connected device doesnothave an 802.1X supplicant (software) or does not respond to EAP (Extensible Authentication Protocol) requests within the specified "Guest authentication delay". In this scenario, the device is moved to the "onboarding" VLAN to allow for basic network access or software downloads.
* Authentication fail VLAN (Option A):This is triggered specifically when a devicedoesattempt to authenticate via 802.1X but the authentication server (RADIUS) returns anAccess-Rejectmessage, typically due toincorrect credentials.
As stated in the scenario, the userattemptsto authenticate but enters thewrong credentials. According to the policy shown in the exhibit, theAuthentication fail VLANis enabled and set to"quarantine.fortilink (quarantine)". Therefore, the FortiSwitch will logically move the port's traffic into the quarantine VLAN, isolating the user from the production network due to the failed login attempt. Option B is incorrect as there is no "shutdown" action configured, and Option D refers to a default state that is overridden by the explicit failure policy.
NEW QUESTION # 96
What is the role of a device that is simultaneously functioning as both the distribution and core in the hierarchy network model?
Answer: C
Explanation:
In a hierarchical network model, the role of a device functioning simultaneously as both the distribution and core is most accurately described as "FortiGate managing FortiSwitch (B)." In this setup, FortiGate acts as the central unit managing multiple FortiSwitch units, thereby functioning both as a distribution layer-handling traffic between network segments-and as a core layer-managing traffic within the network on a broader scale. This setup is typical in medium-sized networks where a single device is capable enough to handle both roles effectively.
NEW QUESTION # 97
Your team is deploying a single FortiGate and a single FortiSwitch across 100 branch offices. The goal is to expedite deployment while avoiding manual configuration errors. Which method would allow you to achieve this goal most efficiently? (Choose one answer)
Answer: A
Explanation:
According to theFortiOS 7.6 Administration Guideand theFortiManager 7.6 Study Guide, the most efficient and scalable method for deploying standardized configurations across a high volume of sites (such as 100 branch offices) isZero-Touch Provisioning (ZTP) through FortiManager.
ZTP allows administrators to createModel DevicesandProvisioning Templateswithin FortiManager before the physical hardware is even unboxed. When a factory-reset FortiGate at a branch office is connected to the internet, it automatically reaches out toFortiCloud(FortiDeploy) to discover its assigned management entity.
Once redirected to the centralFortiManager, the FortiGate retrieves its full configuration, including theFortiLinksettings required to manage the local FortiSwitch.
The 7.6 documentation highlights that because the FortiSwitch is managed via FortiLink, its configuration is technically part of the FortiGate ' s managed objects. Therefore, by using FortiManager to push a single template that includes both the FortiGate settings and theSwitch Controllerconfigurations, the team can ensure that every branch office is configured identically and without manual CLI intervention. This method significantly reduces the risk of human error and ensures rapid, consistent deployment across the entire fabric.
Options A and B refer to cloud management platforms that are effective but do not offer the same level of integrated, template-driven orchestration for large-scale enterprise ZTP as FortiManager. Option D is incorrect as " FortiSwitch Manager " is not the primary orchestration tool for branch-wide ZTP in a FortiLink- integrated environment.
NEW QUESTION # 98
......
As the saying goes, verbal statements are no guarantee. So we are willing to let you know the advantages of our NSE5_FSW_AD-7.6 study braindumps. In order to let all people have the opportunity to try our products, the experts from our company designed the trial version of our NSE5_FSW_AD-7.6 prep guide for all people. If you have any hesitate to buy our products. You can try the trial version from our company before you buy our NSE5_FSW_AD-7.6 Test Practice files. The trial version will provide you with the demo. More importantly, the demo from our company is free for all people. You will have a deep understanding of the NSE5_FSW_AD-7.6 study braindumps from our company by the free demo.
Dump NSE5_FSW_AD-7.6 Collection: https://www.testsimulate.com/NSE5_FSW_AD-7.6-study-materials.html