Our company is trying to satisfy every customer’s demand. Of course, we also attach great importance on the quality of our NSE7_FSN_AR-7.6 real test. Every product will undergo a strict inspection process. In addition, there will have random check among different kinds of NSE7_FSN_AR-7.6 Study Materials. The quality of our NSE7_FSN_AR-7.6 exam quiz deserves your trust. Most of our customers are willing to introduce their friends to purchase our NSE7_FSN_AR-7.6 learning dumps.
| Section | Objectives |
|---|---|
| SD-WAN | - Troubleshooting
|
| Enterprise Firewall | - Authentication and Access Control
|
>> Reliable Exam NSE7_FSN_AR-7.6 Pass4sure <<
Some customers may care about the private information problem while purchasing NSE7_FSN_AR-7.6 Training Materials, if you are concern about this problem, our company will end the anxiety for you if you buy NSE7_FSN_AR-7.6 training material of us . Our company is a professional company, we have lots of experiences in this field, and you email address and other information will be protected well, we respect the privacy of every customers. You give me trust , we give you privacy.
NEW QUESTION # 141
Refer to the exhibit.
An administrator has configured a firewall policy to use proxy-based inspection mode. What could explain the messages observed in the debug flow output?
Answer: D
Explanation:
The correct answer is A.
The debug flow shows:
traffic is going to TCP port 211
FortiGate logs run helper-ftp(dir=original)
The study guide explains exactly what that message means:
"In this example, the run helper-ftp message indicates that the FTP session helper is being used." Under normal proxy-based inspection, protocol handling is controlled by Protocol Options. The FortiOS administration guide states:
"Protocol port mapping only works with proxy-based inspection." and "The ports can be modified to inspect any port with flowing traffic." So if the policy is configured for proxy-based inspection but the debug still shows the FTP session helper on port 211, the most likely explanation is that the FTP protocol mapping in Protocol Options is broad enough to match unexpectedly, such as being mapped to Any. That would cause FortiGate to identify the traffic as FTP and invoke the helper.
Why the other options are wrong:
B is wrong because SSL deep inspection is unrelated to this debug. The traffic shown is plain TCP/211, and the key message is about the FTP helper, not SSL decryption.
C is wrong because if FTP had not been mapped to port 211, FortiGate would be less likely to treat this traffic as FTP. The observed run helper-ftp indicates FTP handling is being triggered.
D is wrong because low-memory conserve behavior would typically cause inspection bypass or blocking behavior, not specifically the run helper-ftp message. The study guide's helper example ties this message to session-helper use, not memory shortage.
So the verified answer is: A.
NEW QUESTION # 142
Refer to the exhibit, which shows the output of get router info ospf neighbor.
What can you conclude from the command output?
Answer: B
NEW QUESTION # 143
Refer to the exhibit.
Partial output of the get vpn ipsec tunnel details command is shown. Based on the output, which two statements are correct? (Choose two.)
Answer: A,D
Explanation:
The correct answers are C and D .
The study guide's get vpn ipsec tunnel details example shows:
* replay: enabled
* inbound and outbound sections with separate SPIs
* NPU acceleration: encryption(outbound) decryption(inbound) and it labels these as "Phase 2 SAs for each direction" and "Hardware acceleration" This directly proves D. Anti-replay is enabled , because the output explicitly says replay: enabled For the NPU status, the study guide explains the exact npu_flag meanings:
* npu_flag=00 = both IPsec SAs loaded to the kernel
* npu_flag=01 = outbound IPsec SA copied to NPU
* npu_flag=02 = inbound IPsec SA copied to NPU
* npu_flag=03 = both outbound and inbound IPsec SAs copied to NPU
Because the exhibit shows hardware acceleration in both directions - encryption(outbound) and decryption(inbound) - the matching npu_flag is 03 , not 02. That makes C correct and A incorrect.
Why B is wrong:
The same study guide output labels the tunnel as having Phase 2 SAs for each direction , so different inbound and outbound SPIs are normal for the two SAs. Also, the FortiOS administration guide explains that auto-negotiate controls whether phase 2 SA negotiation is initiated automatically, not whether inbound and outbound SPIs are different: "By default the phase 2 security association (SA) is not negotiated until a peer attempts to send data... Auto-negotiate initiates the phase 2 SA negotiation automatically..." So the verified answers are: C, D .
NEW QUESTION # 144
Which two protocol states indicate that traffic is bidirectional? (Choose two.)
Answer: A,D
Explanation:
The correct answers are A and B.
For UDP, the study guide states this directly: "For UDP, the session state can have only two values: 00 when traffic is only one way, and 01 when traffic is two ways. For ICMP, the protocol state is always 00." That makes B correct and D incorrect.
For TCP, the study guide explains that the protocol state is a two-digit number, where the first digit is the server-side state and the second digit is the client-side state. It also states that the first digit is 0 when the session is not subject to any inspection, and the TCP state table shows that value 1 = ESTABLISHED So, for a normal non-proxied/non-inspected TCP session, proto_state=01 means the TCP session is in the ESTABLISHED state. An established TCP session means the three-way handshake has completed, which requires traffic in both directions. That is why A is correct.
The study guide also says: "proto_state=11 means that the TCP three-way handshake for both server-side and client-side is completed (ESTABLISHED)." This confirms that TCP state value 1 represents an established state.
Why C is not selected: the study guide defines value 5 as TIME_WAIT and says: "When a session is closed by both the sender and receiver, FortiGate keeps that session in the session table for a few seconds... This is the state value 5." So proto_state=05 represents a closing/closed TCP session in TIME_WAIT, not the normal bidirectional state the question is testing.
Therefore, the verified answers are A and B.
NEW QUESTION # 145
Refer to the exhibit.
Which three pieces of information does the diagnose sys top command provide? (Choose three.)
Answer: B,C,E
Explanation:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Using-the-diagnose-sys-top-CLI-command/ta-p
/190238
NEW QUESTION # 146
......
The desktop-based practice exam software is the first format that NSE7_FSN_AR-7.6 provides to its customers. It allows candidates to track their progress from start to finish and provides an easily accessible progress report. This Fortinet NSE7_FSN_AR-7.6 Practice Questions is customizable and mimics the real exam's format. It is user-friendly on Windows-based computers, and the product support staff is available to assist with any issues that may arise.
Training NSE7_FSN_AR-7.6 Online: https://www.examcollectionpass.com/Fortinet/NSE7_FSN_AR-7.6-practice-exam-dumps.html