The passing rate is the best test for quality of our 300-110 study materials. And we can be very proud to tell you that the passing rate of our 300-110 Exam Questions is almost 100%. That is to say, as long as you choose our study materials and carefully review according to its content, passing the 300-110 Exam is a piece of cake. We're definitely not exaggerating. If you don't believe, you can give it a try.
| Section | Weight | Objectives |
|---|---|---|
| Wireless Infrastructure Design | 30% | - High-density wireless design
|
| Wireless Site Survey | 25% | - Pre-deployment survey and validation - Layer 1 site survey execution and analysis - RF propagation and attenuation analysis - Design requirements collection and constraint evaluation
|
| WLAN High Availability and Security Design | 20% | - High availability design
|
| Mobility Design | 25% | - Guest mobility and BYOD design - Roaming optimization
|
Our exam dumps are created by our professional IT trainers who are specialized in the Cisco real dumps for many years and they know the key points of test well. So we can ensure you the accuracy and valid of 300-110 dump pdf. Before you buy, you can download the free trial of 300-110 Exam Cram. If you have any problems in the course of purchasing or downloading the 300-110 certification dumps you can contact us anytime.
NEW QUESTION # 72
A university lecture hall has a Cisco wireless high-density network with this configuration: * 5 GHz only * 20- MHz channels * UNII-1, UNII-2, and UNII-2E channels * TPC minimum = 8 * TPC maximum = 14 The lecture hall is 200 feet by 100 feet and has 16 Cisco APs that use directional antennas. Which feature must be included in the design to mitigate and reduce high-channel utilization from rogue APs?
Answer: D
Explanation:
Receive Start of Packet (RxSOP) is a Cisco proprietary mechanism that defines the minimum received signal threshold at which an access point will acknowledge an 802.11 frame and begin processing it. In a high- density lecture hall environment with 16 APs and directional antennas on a constrained channel plan, rogue APs operating on the same or adjacent channels contribute directly to elevated channel utilization by causing unnecessary medium contention, virtual carrier sensing via NAV, and clear channel assessment deferral. By raising the RxSOP threshold on the legitimate APs, the engineer creates a higher signal floor requirement - only signals above the configured RxSOP level are processed. Signals from distant rogue APs, arriving below this threshold, are silently discarded rather than processed, preventing them from consuming airtime through CCA deferral and NAV mechanisms. Band select (Option A) encourages dual-band clients to move to 5 GHz but does not address rogue interference. 802.11w (Option B) is a management frame protection standard, not an interference mitigation tool. DFS detection (Option D) is for radar avoidance on UNII-2 channels, not rogue AP mitigation. Reference: WLSD Study Guide - High-Density WLAN Design, RxSOP Configuration, Channel Utilization Management.
NEW QUESTION # 73
A customer has multiple WLCs running in N+1 redundancy with APs load balanced between the WLCs. The customer performs AP failover testing between the WLCs and notices that some of the APs do not move back to their primary WLC after it recovers. What are two points that must be addressed in the design? (Choose two.)
Answer: D,E
Explanation:
In an N+1 redundancy deployment, an AP ' s ability to return to its designated primary WLC after that controller recovers depends on two distinct configuration requirements working in concert. First, the AP Fallback feature (Option C) must be enabled on the WLC. AP Fallback instructs APs to monitor the availability of their configured primary controller and automatically reconnect to it when it becomes available again, rather than remaining permanently joined to the N+1 backup controller. Without AP Fallback enabled, APs stay connected to whichever controller they most recently joined. Second, the APs must have their primary WLC information correctly configured (Option D). If an AP does not have the primary controller ' s name, IP address, or FQDN correctly set, it cannot identify when its designated primary has recovered and therefore cannot initiate a return fallback. DHCP Option 43 (Option A) is used for initial AP discovery only.
Secondary WLC configuration (Option B) addresses failover direction but not the return path. AP failover priority (Option E) controls which APs are moved first during a failover event, not whether fallback occurs.
Reference: WLSD Study Guide - N+1 Redundancy Design, AP Fallback Configuration, Controller Primary, Secondary and Tertiary Assignment.
NEW QUESTION # 74
A company has three Cisco WLCs that are joined as a mobility group. Mobility multicast messaging is enabled. All the WLCs in the mobility group communicate via a multicast. Which configuration must be identical between the three WLCs to validate communication?
Answer: D
NEW QUESTION # 75
Multiple WLCs are implemented in a high-availability configuration in a mobility group. APs are deployed with only a primary controller assigned. By default, which mobility group member controller do the orphaned APs join in the event of a failed controller?
Answer: A
Explanation:
In a high-availability configuration with multiple WLCs in a mobility group, when APs that only have a primary controller configured become orphaned (their primary WLC fails), they will by default join the controller with the lowest percentage of associated APs per license capacity. This load-based selection mechanism ensures a balanced distribution of APs across the remaining controllers in the mobility group. The WLC with the lowest percentage of AP capacity utilized is chosen because it has the most headroom to accept additional APs without becoming overloaded. This prevents a single backup controller from becoming overwhelmed while others remain underutilized.
NEW QUESTION # 76
A customer has two Cisco wireless controllers named WLC-A and WLC-B. Each controller is in a different building on a campus. The WLCs have different Layer 3 interfaces and broadcast the same SSIDs from their respective APs. Users must remain connected to the same VLAN and maintain their IP addresses during roaming from the APs attached to WLC-A and WLC-B. Which action accomplishes the requirement?
Answer: A
Explanation:
The requirement for users to retain their VLAN assignment and IP address when roaming between buildings managed by different WLCs is a Layer 3 roaming scenario. In Cisco's wireless architecture, IP address preservation across controller boundaries is achieved through inter- controller mobility -- specifically the foreign-anchor mobility tunnel mechanism. When a client roams from Building A (WLC-A) to Building B (WLC-B), WLC-B becomes the foreign controller and WLC-A becomes the anchor controller. WLC-B tunnels the client's traffic back to WLC-A, allowing the client to retain its original IP address even while physically associated to an AP managed by WLC-B. This requires creating a mobility group between WLC-A and WLC-B with both controllers configured with the same mobility group name -- the group name is the trust identifier that permits the mobility tunnel and anchor-foreign relationship to form.
NEW QUESTION # 77
......
Passing the Cisco 300-110 exam at first attempt is a goal that many candidates strive for. However, some of them think that good Designing Cisco Wireless Networks (300-110) study material is not important, but this is not true. The right 300-110 preparation material is crucial for success in the exam. And applicants who donโt find updated Cisco 300-110 prep material ultimately fail in the real examination and waste money. That's why ActualTestsQuiz offers actual Cisco 300-110 exam questions to help candidates pass the exam and save their resources.
300-110 Valid Dumps: https://www.actualtestsquiz.com/300-110-test-torrent.html