BONUS!!! Download part of Pass4training NSEI_OTS_AR-7.6 dumps for free: https://drive.google.com/open?id=1WOW01xhoy2Uff4Mfh7Ek9bbI56oA8SnA
A certificate is not only an affirmation of your ability, but also can improve your competitive force in the job market. NSEI_OTS_AR-7.6 training materials of us can help you pass the exam and get the certificate successfully if you choose us. NSEI_OTS_AR-7.6 exam dumps are reviewed by experienced experts, they are quite familiar with the exam center, and you can get the latest information of the NSEI_OTS_AR-7.6 Training Materials if you choose us. We also pass guarantee and money back guarantee if you choose NSEI_OTS_AR-7.6 exam dumps of us. You give us trust, and we will help you pass the exam successfully.
| Section | Objectives |
|---|---|
| Network Security | - Configure virtual patching - Configure automation - Configure security inspections for industrial protocols |
| Monitoring and Risk Assessment | - Create FortiAnalyzer event handlers - Analyze security reports from FortiAnalyzer - Perform risk assessment and management |
| Network Access Control | - Explain OT Ethernet concepts - Configure network segmentation schemas - Configure network access authentication |
| Asset Management | - Implement device detection on FortiGate and FortiNAC - Use Fortinet Security Fabric for an OT network - Explain OT standards and Fortinet compliance |
>> Latest NSEI_OTS_AR-7.6 Test Question <<
Now you have all the necessary information about quick Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam questions preparation. Just take the best decision of your career and enroll in the Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam. Download the Pass4training Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam real dumps now and start this career advancement journey.
NEW QUESTION # 43
Refer to the exhibit.
The OT devices behind the ruggedized FortiGate have vulnerabilities and you want to apply a virtual patching profile in the firewall policy. Why is Virtual Patching not available in the Security Profiles section? (Choose one answer)
Answer: B
Explanation:
The correct answer is A. You must enable Virtual Patching in the Feature Visibility section .
The study guide states clearly that "By default, virtual patching profiles are hidden on the GUI, and you must enable them through System > Feature Visibility." That exactly matches the situation in the exhibit, where Virtual Patching does not appear under Security Profiles . So the issue is not that the feature is unsupported, but that it is simply hidden in the GUI until it is enabled.
The other options do not answer the question being asked. A valid OT security service license is required for virtual patching signatures and protection workflow, and OT signatures are relevant to IPS-based OT protection, but those do not explain why the menu item itself is missing from the Security Profiles section .
The guide specifically identifies Feature Visibility as the reason the Virtual Patching profile is not shown in the GUI. Therefore, the required action is to enable Virtual Patching in System > Feature Visibility .
NEW QUESTION # 44
Refer to the exhibit.
A partial OT network is shown. You have configured the FortiGate device with VLANs to segment the OT network. The supervisor now wants to connect to the PLC from the Engineering Workstation. How can you allow access from the Engineering Workstation to the PLC? (Choose one answer)
Answer: B
Explanation:
The correct answer is D. You must configure a layer 3 switch .
The study guide explains that "Layer 2 devices can add or remove tags" but "cannot modify them." It then states that "A layer 3 device, such as a router or FortiGate, can modify the VLAN tag before routing the packet. This allows them to route traffic between VLANs." It also explicitly describes
"Router on a Stick" as "a way to allow routing between VLANs." Since the exhibit shows a layer-2 switch and the Engineering Workstation and PLC are placed in different VLANs, inter-VLAN communication requires layer-3 routing.
The other options do not solve this requirement. intra-switch-policy explicit/implicit applies to a software switch , where member interfaces are in the same broadcast domain and same subnet, not to routing between separate VLANs. forward domain IDs are used in transparent mode to confine broadcasts to specific broadcast domains; they do not provide inter-VLAN access. Therefore, to let the Engineering Workstation in one VLAN reach the PLC in another VLAN, you need a layer 3 routing function , which matches option D .
NEW QUESTION # 45
Refer to the exhibit.
Which statement about this partial Asset Identity List page is correct? (Choose one answer)
Answer: D
Explanation:
The correct answer is B. A firewall policy has a Virtual Patching security profile applied to it .
The decisive clue in the exhibit is the Vulnerabilities column showing KEVs and device-specific vulnerability counts. The study guide explains the virtual patching workflow in this exact way: "FortiGate performs a lookup for device-specific vulnerabilities and mitigation rules in FortiGuard," then
"FortiGuard returns specific OT virtual patching signatures," and "FortiGate caches the signatures and mitigation rules that apply to each device." That is the same behavior reflected by the Asset Identity List showing vulnerability information per detected device.
The guide then states that "When traffic related to the vulnerable device reaches FortiGate, the firewall policy with the virtual patching profile applies." It also says "A virtual patching profile can be applied to firewall policies in any direction, protecting traffic from or to the vulnerable OT device." This directly links the per-device vulnerability visibility to a Virtual Patching profile enforced through firewall policy.
The other options do not match the exhibit. Antivirus is not described in the study guide as building a device- by-device vulnerability list, Application Control is used for OT protocol and message visibility, and IPS focuses on exploit detection and prevention. The Vulnerabilities/KEVs display is the indicator that FortiGate is using Virtual Patching logic for those OT devices.
NEW QUESTION # 46
Refer to the exhibit.
A firewall policy page is shown. To improve the security of your OT network, you have configured a Supervisor profile in the firewall policies, as shown in the exhibit. However, a supervisor is reporting that he cannot ping PLC-1. What are the two reasons? (Choose two answers)
Answer: A,C
Explanation:
The correct answers are A and C .
Option A is correct because the study guide explains that with active authentication , FortiGate prompts the user only when they use "an acceptable login protocol." It states: "When you use only active authentication, if all possible policies that could match the source IP address have authentication enabled, then the user will receive a login prompt (assuming they use an acceptable login protocol)." A direct ping to PLC-1 uses ICMP , which is not the kind of login protocol used to trigger user authentication.
So the supervisor must first authenticate through a protocol such as HTTPS or Telnet , then the ICMP traffic can match the authenticated policy.
Option C is also correct because the exhibit shows policy ID 8 greyed out, meaning it is not enabled. That policy appears above the Supervisor_access (9) policy and allows broader access to PLC-1 , whereas policy 9 is limited to ALL_ICMP . The study guide explains that "Because the user has not yet authenticated, the user group aspect of the traffic does not match" and FortiGate continues searching for another complete match. In this case, with policy 8 disabled, the supervisor is left with only the ICMP rule, which cannot be used to perform the initial login step needed for active authentication.
Option B is not supported by the exhibit. Option D is incorrect because auth-on-demand always would force authentication prompts more aggressively, but the core problem here is that the user is trying to start with ICMP and the broader policy that could permit the initial authenticated access is disabled.
NEW QUESTION # 47
Refer to the exhibit.
Which statement about this partial Asset Identity List page is correct? (Choose one answer)
Answer: D
Explanation:
The correct answer is B. A firewall policy has a Virtual Patching security profile applied to it .
The decisive clue in the exhibit is the Vulnerabilities column showing KEVs and device-specific vulnerability counts. The study guide explains the virtual patching workflow in this exact way: "FortiGate performs a lookup for device-specific vulnerabilities and mitigation rules in FortiGuard," then
"FortiGuard returns specific OT virtual patching signatures," and "FortiGate caches the signatures and mitigation rules that apply to each device." That is the same behavior reflected by the Asset Identity List showing vulnerability information per detected device.
The guide then states that "When traffic related to the vulnerable device reaches FortiGate, the firewall policy with the virtual patching profile applies." It also says "A virtual patching profile can be applied to firewall policies in any direction, protecting traffic from or to the vulnerable OT device." This directly links the per-device vulnerability visibility to a Virtual Patching profile enforced through firewall policy.
The other options do not match the exhibit. Antivirus is not described in the study guide as building a device- by-device vulnerability list, Application Control is used for OT protocol and message visibility, and IPS focuses on exploit detection and prevention. The Vulnerabilities/KEVs display is the indicator that FortiGate is using Virtual Patching logic for those OT devices.
NEW QUESTION # 48
......
Preparing with Pass4training Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) practice exam would be the most effective way to get success. Pass4training would give you access to Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam questions that are factual and unambiguous, as well as information that is important for the preparation of the NSEI_OTS_AR-7.6 NSEI_OTS_AR-7.6 exam.
NSEI_OTS_AR-7.6 Customizable Exam Mode: https://www.pass4training.com/NSEI_OTS_AR-7.6-pass-exam-training.html
2026 Latest Pass4training NSEI_OTS_AR-7.6 PDF Dumps and NSEI_OTS_AR-7.6 Exam Engine Free Share: https://drive.google.com/open?id=1WOW01xhoy2Uff4Mfh7Ek9bbI56oA8SnA