We have the free demo for the H19-404_V1.0 study guide, it will help you to have a better understanding of the exam dumps, if you decide to buy and pay for it, we will send the downloading link and password to you within 10 minutes, and if you don't receive it, please contact to our service stuff, we will deal with the problem for you immediately. What's more, free update for the H19-404_V1.0 Study Guide for 365 days, and the update version will send to you by email automaticially, therefore you can have the latest information for the HCSE-Presales-Campus Network Planning and Design V1.0.
| Section | Objectives |
|---|---|
| Topic 1: Campus Network Fundamentals | - Typical campus network deployment models - Enterprise campus network architecture principles |
| Topic 2: Presales Solution Design | - Customer requirement analysis - Solution proposal and design methodology |
| Topic 3: WLAN Planning and Design | - Capacity and performance design considerations - Wireless coverage planning |
| Topic 4: Huawei Campus Network Solutions | - CloudCampus solution architecture - iMaster NCE-Campus management platform |
| Topic 5: Network Security Design | - Campus security architecture considerations - Access control strategies |
| Topic 6: Switching and Routing in Campus Networks | - Layer 2 and Layer 3 design principles - VLAN and segmentation design |
>> Free H19-404_V1.0 Pdf Guide <<
No doubt the Huawei H19-404_V1.0 certification exam is one of the most difficult Prep4cram certification exams in the modern Prep4cram world. This H19-404_V1.0 exam always gives a tough time to their candidates. The Prep4cram understands this challenge and offers real, valid, and top-notch Huawei H19-404_V1.0 Exam Dumps in three different formats. All these three H19-404_V1.0 exam questions formats are easy to use and compatible with all devices, operating systems, and web browsers.
NEW QUESTION # 29
Which of the following are WAN interconnection models for multi-branch campus networks?
Answer: A,B,D
Explanation:
Huawei SD-WAN supports full-mesh, hub-spoke, and partial-mesh interconnection models. In a full-mesh topology, every site can communicate directly with the other sites. This model minimizes intermediate forwarding and is appropriate when branches frequently exchange latency-sensitive traffic such as voice, video, or collaborative application data.
In a hub-spoke topology, branch sites communicate with a central headquarters or data-center hub. Branch-to- branch traffic normally traverses that hub. The model is simple, scalable, and suitable for enterprises whose applications and shared resources are concentrated at headquarters.
Partial-mesh is used when most sites can communicate directly but some sites lack direct underlay connectivity or do not require direct tunnels. Those sites can communicate through a redirect or intermediate site. Huawei describes full-mesh, hub-spoke, and partial-mesh as supported topology designs and explains the role of a redirect site in partial-mesh networking.
"Partial-spoke" is not a defined SD-WAN topology model. A spoke is a role within hub-spoke networking rather than an independent partial-spoke topology. Therefore, A, B, and D are correct.
NEW QUESTION # 30
Which of the following statements is false about the energy-saving function of the digital map?
Answer: C
Explanation:
Option C is false. The digital-map energy-saving function provides network-wide energy visibility, identifies periods of low wireless demand, and recommends appropriate energy-saving time windows. During an approved energy-saving period, selected wireless APs or radio resources can be placed into an energy-saving state after the system evaluates coverage, traffic, and capacity requirements.
Automatically powering off switches is not the intended function. Campus switches may carry essential wired services, provide uplinks for other network devices, and supply PoE power to APs, cameras, phones, sensors, and access-control systems. Automatically shutting down a complete switch could therefore interrupt many unrelated services and potentially disconnect downstream network segments.
Huawei identifies low-carbon and energy-saving operation as a characteristic of cloud campus networks and combines this objective with AI-based intelligent O & M and proactive optimization. Its intelligent O & M architecture analyzes AP load trends and performs predictive wireless-network optimization, providing the analytical foundation for selecting safe energy-saving periods and resources.
Therefore, A, B, and D describe supported digital-map energy-saving capabilities. Automatic switch power- off is the false statement, making C correct.
NEW QUESTION # 31
Which of the following encryption algorithms is used by WPA3?
Answer: D
Explanation:
The intended answer is AES-256. In certification material, this question normally refers to the enhanced WPA3-Enterprise 192-bit security suite, which uses the GCMP-256 data-protection algorithm based on AES-
256, together with stronger integrity and key-management components. AES-512 is not a standardized AES variant, and RC4 is the obsolete stream cipher associated with legacy WEP and TKIP-era protection rather than WPA3.
There is an important technical qualification: WPA3 is a family of certification modes, not one universal cipher suite. WPA3-Personal commonly uses Simultaneous Authentication of Equals for password- authenticated key establishment and requires CCMP-128, which is based on AES-128. WPA3-Enterprise 192- bit mode, however, uses AES-256 in GCM mode. Therefore, the original wording is broader than it should be.
A technically precise version would ask which algorithm is associated with the WPA3-Enterprise 192-bit security suite. Under the intended Huawei examination scope and the supplied single-choice options, option B is correct. That distinction is crucial when interpreting this simplified examination item.
NEW QUESTION # 32
Which of the following functions is supported by the AR6177?
Answer: A
Explanation:
The distinguishing function supported by the AR6177 is VDSL. VDSL, or Very-high-bit-rate Digital Subscriber Line, enables a branch router to obtain WAN connectivity over existing copper telephone infrastructure. It is appropriate for small branches and distributed sites where Ethernet private lines, fiber, or mobile connections are unavailable or commercially impractical.
The AR6177 can terminate the VDSL access circuit and provide routing, NAT, DHCP, VPN, and other branch-gateway functions for the connected LAN. In this single-answer question, Wi-Fi and PoE are not the defining integrated capabilities of the AR6177 model. Similarly, the complete combination of IPS, antivirus, and URL filtering belongs to a security-enhanced product profile rather than the function used to distinguish the AR6177.
Huawei's campus design material recognizes DSL links as a specific WAN-access category and notes that deployments involving complex or low-speed links, including DSL, may require an appropriate branch-device deployment method. The model is therefore selected when direct VDSL-based WAN access is required.
Consequently, VDSL is the supported capability intended by this question, and option C is correct.
NEW QUESTION # 33
It is recommended that policy association be deployed between the access and aggregation layers when distributed VXLAN gateways are used and VXLAN is deployed across the core and aggregation layers.
Answer: B
Explanation:
The statement is true. In this three-layer campus design, aggregation switches function as VXLAN edge nodes and distributed gateways, while access switches provide terminal connectivity. Policy association allows the access switches to participate in user admission and policy enforcement without requiring them to support full VXLAN functions.
The access switch collects terminal access information and associates user traffic with the appropriate service or policy. The aggregation switch, acting as the fabric edge and VXLAN tunnel endpoint, performs VXLAN encapsulation, distributed gateway forwarding, and policy-related operations. Huawei specifically states that when aggregation switches operate as edge nodes, access switches do not need to support VXLAN and can cooperate with aggregation switches through policy association. This also permits legacy access switches to be reused.
The design reduces upgrade costs and avoids extending complex overlay configurations to every access device. Huawei's automated virtual-network deployment model also explicitly includes policy association between the aggregation and access layers, allowing access switches without VXLAN capability to operate as transparent or associated access nodes. Therefore, option A is correct.
NEW QUESTION # 34
......
The three versions of our H19-404_V1.0 practice braindumps have their own unique characteristics. The PDF version of H19-404_V1.0 training materials is convenient for you to print, the software version of training guide can provide practice test for you and the online version is for you to read anywhere at any time. If you are hesitating about which version should you choose, you can download our H19-404_V1.0 free demo first to get a firsthand experience before you make any decision.
Certification H19-404_V1.0 Dumps: https://www.prep4cram.com/H19-404_V1.0_exam-questions.html