P.S. Free & New 350-501 dumps are available on Google Drive shared by RealVCE: https://drive.google.com/open?id=10OFdcXbt-xImg1ye1LaszAMjz3fhZeeg
Our 350-501 training materials are excellent. The quality is going through official authentication. So your money paid for our 350-501 practice engine is absolutely worthwhile. In addition, you are advised to invest on yourselves. After all, no one can be relied on except yourself. And you can rely on our 350-501 learning quiz. We can claim that if you study with our 350-501 exam questions for 20 to 30 hours, then you are bound to pass the exam for we have high pass rate as 98% to 100%.
| Section | Weight | Objectives |
|---|---|---|
| Automation and Programmability | 15% | - Data modeling
|
| Core Networking | 25% | - Routing protocols
|
| Core Services | 20% | - Traffic engineering
|
| Network Assurance | 5% | - Monitoring and troubleshooting
|
| Security | 10% | - Control plane security
|
| Quality of Service | 10% | - Classification and marking
|
| Core Architecture | 15% | - Service provider network architectures
|
Even if you spend a small amount of time to prepare for 350-501 certification, you can also pass the exam successfully with the help of RealVCE Cisco 350-501 braindump. Because RealVCE exam dumps contain all questions you can encounter in the actual exam, all you need to do is to memorize these questions and answers which can help you 100% pass the exam. This is the royal road to Pass 350-501 Exam. Although you are busy working and you have not time to prepare for the exam, you want to get Cisco 350-501 certificate. At the moment, you must not miss RealVCE 350-501 certification training materials which are your unique choice.
NEW QUESTION # 389
Refer to the exhibit:
Which purpose of implementing NSF with this configuration is true?
Answer: D
Explanation:
The configuration in the exhibit shows the implementation of Nonstop Forwarding (NSF) with OSPF. NSF is used to minimize the downtime of neighbor relationships during a Route Processor (RP) switchover.
The nsf command enables NSF, and ietf specifies the use of the IETF standard for graceful restart in OSPF.
The restart interval 90 sets the time, in seconds, within which the restarting router should complete its restart, helping to maintain uninterrupted forwarding despite the switchover.
Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR v1.0); Cisco SPCOR Training & Certification.
NEW QUESTION # 390
Refer to the exhibit. An organization s network recently experienced several significant outages due to device failures. The network administrator just moved the network devices to a new central data center, and packets are switched using labels. The administrator Is now implementing NSF on the network to reduce potential risk factors in the event of another outage. Which task must the administrator perform on each router as part of the process?
Answer: B
NEW QUESTION # 391
Refer to the exhibit:
Based on the show/ command output, which result m true after BGP session is established?
Answer: D
NEW QUESTION # 392
Refer to the exhibit. Which two features characterize remotely triggered black hole filtering?
(Choose two.)
Answer: B,D
Explanation:
Remotely Triggered Black Hole (RTBH) Filtering:
RTBH is a security mechanism used to mitigate DDoS (Distributed Denial of Service) attacks.
It redirects undesired traffic (e.g., malicious traffic) to a "black hole" where it is discarded, effectively protecting the target.
Key Characteristics:
RTBH filtering relies on a set of coordinated configurations across the network, involving routing protocols and filtering mechanisms.
RTBH provides a fast and efficient way to drop unwanted traffic at the network edge, reducing the load on internal network devices and ensuring service availability.
Routing Protocols:
RTBH can be implemented with routing protocols like BGP to propagate black hole routes to edge routers.
It does not specifically require OSPF or EIGRP.
Vendor Independence:
While Cisco devices can implement RTBH, it is not a Cisco-specific feature. It can be deployed on any network that supports the necessary routing protocols.
RTBH is a powerful and efficient tool for mitigating attacks by coordinating routing and filtering configurations to drop malicious traffic at the network edge.
NEW QUESTION # 393
SIMULATION 1
Guidelines
This is a lab item in which tasks will be performed on virtual devices.
- Refer to the Tasks tab to view the tasks for this lab item.
- Refer to the Topology tab to access the device console(s) and perform the tasks.
- Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
- All necessary preconfigurations have been applied.
- Do not change the enable password or hostname for any device.
- Save your configurations to NVRAM before moving to the next item.
- Click Next at the bottom of the screen to submit this lab and move to the next question.
- When Next is clicked, the lab closes and cannot be reopened.
Topology
Tasks
Configure the BGP routing protocol for R1 and R2 according to the topology to achieve these goals:
1. Configure EBGP neighbor adjacency for the IPv4 and IPv6 address family between R1 and R2 using Loopback0 IPv4 and IPv6 addresses. All BGP updates must come from the Loopback0 interface as the source. Do not use IGP routing protocols to complete this task.
2. Configure MD5 Authentication for the EBGP adjacency between R1 and R2. The password is clear text C1sc0!.
Answer:
Explanation:
R1:
conf t
ip route 2.2.2.2 255.255.255.255 192.168.1.2
ip route 2000:cc13:cc13:2::1/128 2000:cc13:cc13:cc13::2
router bgp 65515
neighbor 2000:cc13:cc13:2::1 remote-as 65516
neighbor 2000:cc13:cc13:2::1 update-source lo0
neighbor 2000:cc13:cc13:2::1 disable-connected-check
neighbor 2000:cc13:cc13:2::1 ebgp-multihop 2
neighbor 2000:cc13:cc13:2::1 password C1sc0!.
neighbor 2.2.2.2 remote-as 65516
neighbor 2.2.2.2 update-source lo0
neighbor 2.2.2.2 disable-connected-check
neighbor 2.2.2.2 ebgp-multihop 2
neighbor 2.2.2.2 password C1sc0!.
address-family ipv4 unicast
neighbor 2.2.2.2 activate
address-family ipv6
neighbor 2000:cc13:cc13:2::1 activate
do copy running-config startup-config
R2:
conf t
ip route 1.1.1.1 255.255.255.255 192.168.1.1
ip route 2000:cc13:cc13:1::1/128 2000:cc13:cc13:cc13::1
router bgp 65516
neighbor 2000:cc13:cc13:1::1 remote-as 65515
neighbor 2000:cc13:cc13:1::1 update-source lo0
neighbor 2000:cc13:cc13:1::1 disable-connected-check
neighbor 2000:cc13:cc13:1::1 ebgp-multihop 2
neighbor 2000:cc13:cc13:1::1 password C1sc0!.
neighbor 1.1.1.1 remote-as 65515
neighbor 1.1.1.1 update-source lo0
neighbor 1.1.1.1 disable-connected-check
neighbor 1.1.1.1 ebgp-multihop 2
neighbor 1.1.1.1 password C1sc0!.
address-family ipv4 unicast
neighbor 1.1.1.1 activate
address-family ipv6
neighbor 2000:cc13:cc13:1::1 activate
do copy running-config startup-config
NEW QUESTION # 394
......
The data that come up with our customers who have bought our 350-501 actual exam and provided their scores show that our high pass rate is 98% to 100%. This is hard to find and compare with in the market. And numerous enthusiastic feedbacks from our worthy clients give high praises not only on our 350-501 study torrent, but also on our sincere and helpful 24 hours customer services on 350-501 exam questions online. All of these prove that we are the first-class vendor in this career and have authority to ensure your success in your first try on 350-501 exam.
Valid Exam 350-501 Book: https://www.realvce.com/350-501_free-dumps.html
DOWNLOAD the newest RealVCE 350-501 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=10OFdcXbt-xImg1ye1LaszAMjz3fhZeeg