P.S. Free 2026 Fortinet NSE5_FSW_AD-7.6 dumps are available on Google Drive shared by PassReview: https://drive.google.com/open?id=1gOzozzk4xrvXbPwOsZ5Jkol2YLyMvJ8g
PassReview will provide you with a standard, classified, and authentic study material for all the IT candidates. Our experts are trying their best to supply you with the high quality NSE5_FSW_AD-7.6 training pdf which contains the important knowledge required by the actual test. The high quality and valid NSE5_FSW_AD-7.6 study torrent will make you more confidence in the real test. Additionally, you will get the updated Fortinet vce dumps within one year after payment. With the updated NSE5_FSW_AD-7.6 study material, you can successfully pass at first try.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
>> Training NSE5_FSW_AD-7.6 Material <<
PassReview provides you with Fortinet NSE5_FSW_AD-7.6 exam questions in 3 different formats to open up your study options and suit your preparation tempo. The Fortinet NSE5_FSW_AD-7.6 PDF is the most convenient format to go through all exam questions easily. It is a compilation of actual Fortinet NSE5_FSW_AD-7.6 exam questions and answers.
NEW QUESTION # 80
Refer to the exhibit.
FortiSwitch 802.1X port security configuration is shown. A user connects their laptop to the port and attempts to authenticate using 802.1X, but enters the wrong credentials multiple times. What will the result to the device be? (Choose one answer)
Answer: B
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, 802.1X port security allows administrators to define specific actions based on the outcome of an authentication attempt.
The configuration exhibit shows a security policy named " Students " with two specialized VLAN assignments enabled: aGuest VLANand anAuthentication fail VLAN.
In FortiSwitchOS 7.6, these two settings serve distinct purposes based on the client ' s behavior:
* Guest VLAN (Option C):This is used when a connected device doesnothave an 802.1X supplicant (software) or does not respond to EAP (Extensible Authentication Protocol) requests within the specified " Guest authentication delay " . In this scenario, the device is moved to the " onboarding " VLAN to allow for basic network access or software downloads.
* Authentication fail VLAN (Option A):This is triggered specifically when a devicedoesattempt to authenticate via 802.1X but the authentication server (RADIUS) returns anAccess-Rejectmessage, typically due toincorrect credentials.
As stated in the scenario, the userattemptsto authenticate but enters thewrong credentials. According to the policy shown in the exhibit, theAuthentication fail VLANis enabled and set to " quarantine.fortilink (quarantine) " . Therefore, the FortiSwitch will logically move the port ' s traffic into the quarantine VLAN, isolating the user from the production network due to the failed login attempt. Option B is incorrect as there is no " shutdown " action configured, and Option D refers to a default state that is overridden by the explicit failure policy.
NEW QUESTION # 81
(Full question statement start from here)
Refer to the exhibits.
Three FortiSwitch devices were recently configured to be managed by FortiGate. Two are managed successfully, butFortiSwitch Access-1is not.
Based on the configuration output, whichinitial changeis required for FortiSwitch Access-1 to be managed?
(Choose one answer)
Answer: C
Explanation:
In a FortiGate-managed switching deployment usingFortiLink, FortiSwitch devices rely on theirinternal interfaceto establish management connectivity with the FortiGate. According to the FortiSwitchOS 7.6 Administrator Guide, when a FortiSwitch operates in FortiLink mode, theinternal interface must obtain an IP address dynamically via DHCPfrom the FortiGate over the FortiLink interface. This IP address is required for control-plane communication, including CAPWAP-based management messaging.
From the exhibit, FortiGate successfully managesCore-1andCore-2, whileAccess-1remains offline. The FortiGate diagnostic output explicitly reports that itcannot detect Access-1 at the FortiLink interface, even though CAPWAP is enabled and the switch is in FortiLink mode. This eliminates CAPWAP configuration (Option B) as the root cause.
Examining the FortiSwitch Access-1 CLI output reveals the key issue:
* Theinternal interfaceis configured withmode: staticand an IP address of0.0.0.0.
This configuration prevents Access-1 from obtaining a valid FortiLink management IP address, which is mandatory for FortiGate discovery and authorization. In contrast, FortiSwitch devices managed by FortiGate must have their internal interface set toDHCP, allowing the FortiGate to automatically assign an address from the FortiLink subnet.
Assigning a static IP (Option A) is not recommended or required in FortiLink-managed mode, NTP configuration (Option D) has no impact on discovery, and CAPWAP is already enabled as shown in the FortiGate output.
Therefore, theinitial and required corrective actionis toset the Access-1 internal interface mode to DHCP
, makingOption Cthe correct and fully verified answer based on FortiOS 7.6 and FortiSwitchOS 7.6 documentation.
NEW QUESTION # 82
Refer to the exhibit.
The FortiSwitch CLI output of the diagnose switch-controller switch-info poe summary command for the switch Access-1 is shown. It shows that two ports have Power over Ethernet (PoE) enabled and are already in use. What is the most important consideration if you want to connect additional PoE devices to FortiSwitch?
(Choose one answer)
Answer: C
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, the primary physical constraint when deploying PoE devices is the total power capacity of the switch's internal power supply unit (PSU). The provided exhibit shows the PoE status forAccess-1, highlighting three critical metrics: theUnit Power Budget (185.00W), the currentUnit Power Consumption (12.70W), and theUnit Guard Band.
TheUnit Power Budgetrepresents the maximum amount of power the switch can provide to all connected Powered Devices (PDs) simultaneously. As more devices (such as access points, VoIP phones, or cameras) are connected, the cumulative power draw increases. The most important consideration is ensuring that the total PoE consumption does not exceed this budget. If the budget is exceeded, the switch will stop providing power to new devices or, depending on the configuration, may shut down lower-priority ports to protect the system hardware.
In this specific exhibit, theUnit Poe Power Modeis set toPriority Based. This means that if the power consumption approaches the budget limit, the switch will use the configured port priorities (seen as "Low" for port1 and port2) to decide which devices to keep powered. TheGuard Band(set to a dynamic value) also plays a role by reserving a small amount of power to handle spikes when devices initialize, further emphasizing that the power budget is a hard limit that must be actively managed by the administrator.
NEW QUESTION # 83
Which Ethernet frame can create Layer 2 flooding due to all bytes on the destination MAC address being set to all FF?
Answer: D
Explanation:
Layer 2 flooding caused by Ethernet frames with all bytes in the destination MAC address set to FF refers to broadcast frames.Here's why:
* Broadcast Ethernet Frame (A):
* Address Specification:In Ethernet networking, a broadcast frame has a destination MAC address ofFF:FF:FF:FF:FF:FF, which instructs network devices to forward the frame to all devices within the broadcast domain.
* Network Behavior:This causes Layer 2 flooding as the frame is sent to all ports in the VLAN, except the originating port, ensuring that the broadcast reaches all network segments.
* Other Frame Types:
* Unicast (B)targets a single device.
* Multicast (C)targets a group of devices.
* Anycast (D)is not used in Ethernet but rather in IP-based routing to route to the nearest of multiple destinations, typically in internet addressing.
References:You can find more information about Ethernet frame types in networking textbooks or documentation that discusses network layer interaction:Network Theory Books
NEW QUESTION # 84
Exhibit.
You need to manage three FortiSwitch devices using a FortiGate device. Two of the FortiSwitch devices initiated a reboot after the authorization process. However, the FortiSwitch device with the configuration shown in the exhibit. did not reboot All three devices completed FortiLink manage-ment authorization successfully.
Why did the FortiSwitch device shown in the exhibit not reboot to complete the authorization pro-cess?
The management mode was set to use FortiLink mode.
Answer: B
Explanation:
Regarding the scenario where a FortiSwitch did not reboot after the authorization process while the other devices did, the most likely cause, given the configuration settings in the exhibit, is:
* The management mode was set to use FortiLink mode (Option B): If the FortiSwitch was already configured to use FortiLink for its management mode, it may not require a reboot to complete the authorization process as its management interface settings are already aligned with FortiLink requirements. This is unlike switches that might be transitioning from a standalone or another management mode, which would typically require a reboot to apply new management settings fully.
References:
FortiLink mode specifically tailors FortiSwitch to be managed via a FortiGate device, integrating its operation into the wider security fabric without needing a reboot if it is already set to this mode before authorization.
This contrasts with other management modes where transitioning to FortiLink could necessitate a system restart to initialize the new configuration.
NEW QUESTION # 85
......
The Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) web-based practice test works on all major browsers such as Safari, Chrome, MS Edge, Opera, IE, and Firefox. Users do not have to install any excessive software because this NSE5_FSW_AD-7.6 practice test is web-based. It can be accessed through any operating system like Windows, Linux, iOS, Android, or Mac. Another format of the practice test is the desktop software. It works offline only on Windows. Our Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) desktop-based practice exam software comes with all specifications of the web-based version.
NSE5_FSW_AD-7.6 Latest Exam Forum: https://www.passreview.com/NSE5_FSW_AD-7.6_exam-braindumps.html
BTW, DOWNLOAD part of PassReview NSE5_FSW_AD-7.6 dumps from Cloud Storage: https://drive.google.com/open?id=1gOzozzk4xrvXbPwOsZ5Jkol2YLyMvJ8g