In today’s global market, tens of thousands of companies and business people are involved in this line of NSEI_OTS_AR-7.6 exam. It is of utmost importance to inquire into the status of exam candidates’ wills to figure out what are the NSEI_OTS_AR-7.6 practice materials you really needed. According to your requirements we made our NSEI_OTS_AR-7.6 Study Materials for your information, and for our pass rate of the NSEI_OTS_AR-7.6 exam questions is high as 98% to 100%, we can claim that you will pass the exam for sure.
| Section | Objectives |
|---|---|
| Network Security | - Configure virtual patching - Configure automation - Configure security inspections for industrial protocols |
| Network Access Control | - Configure network segmentation schemas - Configure network access authentication - Explain OT Ethernet concepts |
| Asset Management | - Explain OT standards and Fortinet compliance - Implement device detection on FortiGate and FortiNAC - Use Fortinet Security Fabric for an OT network |
| Monitoring and Risk Assessment | - Perform risk assessment and management - Create FortiAnalyzer event handlers - Analyze security reports from FortiAnalyzer |
>> Exam NSEI_OTS_AR-7.6 Questions <<
Our NSEI_OTS_AR-7.6 learning guide is very efficient tool in the world. As is known to us, in our modern world, everyone is looking for to do things faster, better, smarter, so it is no wonder that productivity hacks are incredibly popular. So we must be aware of the importance of the study tool. In order to promote the learning efficiency of our customers, our NSEI_OTS_AR-7.6 Training Materials were designed by a lot of experts from our company. You can totally rely on our NSEI_OTS_AR-7.6 study materials.
NEW QUESTION # 43
Refer to the exhibit.
The configuration of firewall policies is shown.
To improve the security of your OT network, you have configured authentication in the firewall policies as shown in the exhibit, with CLI parameters set to their default settings. However, when you test HTTPS access from the LAN subnet to PLC-1, it is successful without any authentication prompt.
What is the reason?
Answer: D
Explanation:
The correct answer is A . Policy ID 8 contains the Supervisors user group, so authentication is required for traffic matching that policy. However, policy ID 9 permits traffic to PLC-1 without a user or user-group authentication requirement. Fortinet explains that when an authentication policy is followed by a fall-through policy that does not require authentication , traffic can match the fall-through policy and proceed without generating a login prompt. This is particularly relevant because the default CLI setting is auth-on-demand implicitly. Under the default implicitly behavior, FortiGate does not trigger active authentication when a matching unauthenticated fall-through policy exists. Setting auth-on-demand always, or requiring authentication on all potentially matching policies, changes that behavior. Therefore, HTTPS succeeds without prompting because authentication was not configured on firewall policy ID 9 .
NEW QUESTION # 44
You would like to customize your current FortiAnalyzer report to provide a better risk assessment of your OT network. Which two options can you use to enhance your report? (Choose two answers)
Answer: B,C
Explanation:
The correct answers are B. The Datasets library and D. The Chart library .
The study guide explains that a FortiAnalyzer report is built from charts, and that charts consist of two elements: datasets and format . It states: "A FortiAnalyzer report is a set of data organized in charts" and "Charts consist of two elements: Datasets ... and Format." It then goes further in the Customizing Reports section and explicitly says "By default, the Chart Library contains more than 300 charts" and
"By default, the Datasets library contains almost 400 datasets." It also states that you can clone and edit both charts and datasets, and create new ones , which is exactly how you enhance and customize an existing report.
The other options are not the best answers for this question. FortiView can export a chart into a report chart, and Log View can help build a custom dataset and chart from search results, but the question asks which options you can use to enhance the report itself. The study guide identifies the actual report-customization components as the Chart Library and Datasets library . Dashboard library is not presented as a FortiAnalyzer report customization library in this section.
NEW QUESTION # 45
Refer to the exhibit.
The Core Network Security Connectors page of the FortiGate-2 device is shown. Which statement is correct? (Choose one answer)
Answer: A
Explanation:
Based on the provided exhibit and the OT Security 7.6 Architect curriculum regarding the Fortinet Security Fabric :
* Fabric Role : The exhibit clearly shows that FortiGate-2 has the role set to Join Fabric . This confirms it is a downstream device and not the Fabric Root (eliminating Option A).
* Upstream Connection : The device is configured to point to an Upstream FortiGate at IP address
10.1.2.254 .
* Fabric Status : The status is currently displayed as Not Connected . In a standard Fortinet Security Fabric deployment, once a downstream device is configured to join the fabric, it sends a request to the upstream root device. The root FortiGate must then explicitly authorize the downstream unit before the connection is established and the status changes to " Connected. "
* Authorization Requirement : The " Not Connected " status, while having the upstream IP correctly configured, is the classic indicator that the authorization step is pending on the root FortiGate.
Furthermore, under the LAN Edge Devices section, it shows another downstream FortiGate requiring authorization on this specific unit, highlighting that authorization is a manual security requirement for all stages of the Fabric hierarchy.
* FortiAnalyzer Status : While the Logging & Analytics section shows FortiAnalyzer is Disabled , this is a configuration choice and does not prevent the Security Fabric from connecting; therefore, configuring it is not the solution to the connectivity status shown (eliminating Option C).
In summary, FortiGate-2 cannot join the fabric until an administrator logs into the Root FortiGate (10.1.2.254) and authorizes the join request from FortiGate-2.
NEW QUESTION # 46
Refer to the exhibit.
A basic event handler is shown. You have enabled Automation Stitch to automate the handling of an alert.
Which two steps must you take to use this automation stitch? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are C and D .
Option D is correct because the study guide states that the configuration of an event handler can include
"Rules" and explains that "Rules are granular conditions" and "Event handlers can have one or more rules." It further states that "FortiAnalyzer uses event handlers to filter all incoming logs" and "If logs match the conditions configured in an event handler, FortiAnalyzer generates an event." Therefore, to use the automation stitch, you must define the rules on FortiAnalyzer so the event handler can actually generate the event that starts the automation flow.
Option C is also correct. The study guide explains that "When a handler generates an event with the automation stitch option enabled, FortiAnalyzer sends a notification" to the FortiGate side, and in the attack-detection example it says "FortiAnalyzer parses the logs and notifies the root FortiGate" and then
"The root FortiGate triggers the action." It also explicitly shows "Stitches configured on root FortiGate." This means the FortiGate must have the corresponding automation trigger configured for the FortiAnalyzer event handler notification.
Option A is incorrect because the study guide does not describe configuring an Action on FortiAnalyzer as the required step for this FortiAnalyzer-to-FortiGate automation-stitch flow. Option B is also incorrect because playbooks are a different FortiAnalyzer automation mechanism; the question specifically refers to using the Automation Stitch option in the event handler.
NEW QUESTION # 47
You want to automate some tasks in your OT network. Which three configurations are directly available in a new basic event handler on FortiAnalyzer? (Choose three answers)
Answer: B,C,D
Explanation:
According to the OT Security 7.6 Architect study guide regarding FortiAnalyzer Event Management :
* Notification Options : When configuring a new event handler, FortiAnalyzer provides several built-in notification methods to alert administrators when specific log criteria are met. The most common and direct method is Send alert email (Option A).
* Incident Management : To streamline the SOC workflow, an event handler can be configured to Automatically create an incident (Option D) based on the triggered event. This moves the event into the Incident Manager for further analysis.
* Security Fabric Integration : In the 7.6 architecture, event handlers can directly trigger an Automation stitch (Option E). This allows the FortiAnalyzer to notify the root FortiGate to take action (like running a CLI script or changing a policy) across the Security Fabric.
* Exclusions : Create a report (Option B) is typically a task performed by a Playbook or a scheduled report job, not a direct setting inside the basic event handler configuration. Quarantine an attacker (Option C) is an action that results from an automation stitch or playbook, but it is not a direct configuration toggle within the event handler itself.
NEW QUESTION # 48
......
If you are going to purchasing the NSEI_OTS_AR-7.6 training materials, and want to get a general idea of what our product about, you can try the free demo of our website. Once you have decide to buy the NSEI_OTS_AR-7.6 training materials, if you have some questions, you can contact with our service, and we will give you suggestions and some necessary instruction. You will get the NSEI_OTS_AR-7.6 Exam Dumps within ten minutes. And if you didn’t receive it, you can notify us through live chat or email, we will settle it for you.
NSEI_OTS_AR-7.6 Training Courses: https://www.dumpsreview.com/NSEI_OTS_AR-7.6-exam-dumps-review.html