P.S. Free & New NSE6_SDW_AD-7.6 dumps are available on Google Drive shared by ITCertMagic: https://drive.google.com/open?id=1DINCEgzhPjMWVhK4zwtRGqwwVCAHNNeA
If you are the first time to prepare the NSE6_SDW_AD-7.6 exam, it is better to choose a type of good study materials. After all, you cannot understand the test syllabus in the whole round. It is important to predicate the tendency of the NSE6_SDW_AD-7.6 study materials if you want to easily pass the exam. Now, all complicate tasks have been done by our experts. They have rich experience in predicating the NSE6_SDW_AD-7.6 exam. Then you are advised to purchase the study materials on our websites. Also, you can begin to prepare the NSE6_SDW_AD-7.6 Exam. You are advised to finish all exercises of our NSE6_SDW_AD-7.6 study materials. In fact, you do not need other reference books. Our study materials will offer you the most professional guidance. In addition, our NSE6_SDW_AD-7.6 study materials will be updated according to the newest test syllabus. So you can completely rely on our NSE6_SDW_AD-7.6 study materials to pass the exam.
| Section | Objectives |
|---|---|
| Topic 1: SD-WAN Operation | - SD-WAN troubleshooting
|
| Topic 2: SD-WAN Concepts | - SD-WAN basics
|
| Topic 3: SD-WAN Planning and Design | - SD-WAN configuration
|
>> Exam NSE6_SDW_AD-7.6 Simulations <<
When we are in some kind of learning web site, often feel dazzling, because web page design is not reasonable, put too much information all rush, it will appear desultorily. Absorbing the lessons of the NSE6_SDW_AD-7.6 test prep, will be all kinds of qualification examination classify layout, at the same time on the front page of the NSE6_SDW_AD-7.6 test materials have clear test module classification, so clear page design greatly convenient for the users, can let users in a very short period of time to find what they want to study, and then targeted to study.
NEW QUESTION # 27
Refer to the exhibit. The administrator configured the SD-WAN rule ID 4 with two members (port1 and port2) and strategy lowest cost (SLA).
What are the two characteristics of the session shown in the exhibit? (Choose two.)
Answer: C,D
Explanation:
The line sdwan_mbr_seq=1 sdwan_service_id=4 indicates that this session is part of an SD-WAN rule. sdwan_service_id=4 confirms that the session is being handled by SD-WAN rule ID 4. This directly links the flow to the SD-WAN configuration.
The line no_offload_reason: redir-to-ips denied-by-nturbo shows that the session is not offloaded to the NPU (Network Processing Unit) and is being processed by the main CPU. A session that is not offloaded can be re-evaluated. If the outgoing interface (the one currently being used) goes down, the FortiGate will re-evaluate the session against the SD-WAN rules to find a new active member to steer the traffic through. This is a fundamental behavior of SD-WAN, which ensures network resilience.
NEW QUESTION # 28
Refer to the exhibit.
Which statement best describe the role of the ADVPN device in handling traffic?
Answer: C
NEW QUESTION # 29
(Refer to the exhibits. You collected the output shown in the exhibits and want to know which interface TCP traffic will flow through from the user device 10.0.1.101 to the corporate file server 10.0.0.125. All SD-WAN links are stable.
Which interface will FortiGate use to steer the traffic? Choose one answer.)
Answer: B
Explanation:
From the SD-WAN rule configuration (service ID 3, name "Corp"), the rule is configured as:
* set mode sla
* set load-balance enable
* set hash-mode source-ip-based
* set priority-members 3 4 5
* Two SLAs are referenced under config sla
In the diagnose firewall proute list output for service=3 (Corp), FortiGate shows the actual members considered for this rule and their SLA pass status:
* oif=19 (HUB1-VPN1) num_pass=2
* oif=20 (HUB1-VPN2) num_pass=2
* oif=21 (HUB1-VPN3) num_pass=1
Because the rule is SLA-based, FortiGate selects only members that meet the SLA requirements for the rule.
The output indicates that HUB1-VPN1 and HUB1-VPN2 pass both SLA checks (num_pass=2), while HUB1-VPN3 passes only one (num_pass=1) and therefore is not selected as an eligible forwarding interface for this rule.
Since load-balance is enabled and the rule uses hash-mode source-ip-based, FortiGate will consistently choose an eligible member based on the source IP hash. For traffic sourced from 10.0.1.101, the session can be steered through either HUB1-VPN1 or HUB1-VPN2 (whichever the hash selects), but not HUB1-VPN3.
Therefore, the correct answer is B.
NEW QUESTION # 30
Which two statements are correct when traffic matches the implicit SD-WAN rule? (Choose two.)
Answer: B,D
Explanation:
If the session matched the SD-WAN implicit rule, and therefore was handled using standard FIB routing, these SD-WAN fields do not appear.
If traffic doesnt match any entry in the proute table then it will use the implicity deny SD-WAN rule.
NEW QUESTION # 31
(Which two features must you configure before FortiGate can steer traffic according to SD-WAN rules?
Choose two answers.)
Answer: B,D
Explanation:
For FortiGate to steer traffic using SD-WAN rules, two foundational elements must be in place: available WAN paths (underlay links) and firewall policies that allow traffic to reach the SD-WAN interface.
Underlay links (Option B) are mandatory because SD-WAN operates by selecting among multiple WAN transports (for example, broadband, MPLS, LTE, or IPsec tunnels). These links are configured as SD-WAN members and form the physical or logical paths over which traffic can be steered. Without underlay links, SD- WAN has no paths to evaluate or select.
Firewall policies (Option E) are also mandatory because FortiGate only processes and forwards traffic that is explicitly permitted by a firewall policy. When SD-WAN is enabled, firewall policies must reference the SD- WAN interface or SD-WAN zone as the outgoing interface. If no such policy exists, traffic will not be forwarded and SD-WAN rules will never be evaluated.
Why the other options are incorrect:
* Security profiles (Option A) are optional and relate to inspection, not SD-WAN steering.
* Overlay links (Option C) are used in specific designs such as ADVPN or hub-and-spoke overlays, but SD-WAN can steer traffic without overlays (for example, DIA-only designs).
* Traffic shaping (Option D) is not required for SD-WAN decision-making; it is an optional optimization feature.
Therefore, the two required features that must be configured before FortiGate can steer traffic according to SD-WAN rules are underlay links and firewall policies, which correspond to B and E.
NEW QUESTION # 32
......
If you have the certification for the exam, your competitive force and wage will be improved in your company. NSE6_SDW_AD-7.6 exam cram can help you pass the exam and obtain the corresponding certification successfully. We have a professional team to collect and research the latest information for the exam, and you can know the latest information if you choose us. We offer you free update for 365 days for NSE6_SDW_AD-7.6 Exam Dumps, and our system will send you he latest version automatically. You can receive the downloading link and password for NSE6_SDW_AD-7.6 exam dumps within ten minutes after payment.
Top NSE6_SDW_AD-7.6 Questions: https://www.itcertmagic.com/Fortinet/real-NSE6_SDW_AD-7.6-exam-prep-dumps.html
P.S. Free & New NSE6_SDW_AD-7.6 dumps are available on Google Drive shared by ITCertMagic: https://drive.google.com/open?id=1DINCEgzhPjMWVhK4zwtRGqwwVCAHNNeA