P.S. Free 2026 Juniper JN0-364 dumps are available on Google Drive shared by ExamsLabs: https://drive.google.com/open?id=1XYj0_1CmLFUnTP9pGg-Cf5PXwumAB4Gd
In the present situation, you will find companies laying off their employees without any notice or prior information. They are just receiving an email and the next moment they have no access to the company network. So to avoid all this, you have to keep yourself updated with the new version of technologies and applications. You have to become one of Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) certification holders who survived the laying off situation and are still in a great position in their company. You cannot afford to lose it when you need your job the most.
| Section | Objectives |
|---|---|
| BGP and Routing Policy | - Routing policy control
|
| MPLS and Service Provider Technologies | - MPLS fundamentals
|
| Troubleshooting and Operations | - Performance and monitoring
|
| OSPF and IS-IS Routing Protocols | - IS-IS operation in service provider networks
|
| Service Provider Architecture & Junos Fundamentals | - Service provider network design basics
|
>> JN0-364 Reliable Guide Files <<
It is a truism that an internationally recognized JN0-364 certification can totally mean you have a good command of the knowledge in certain areas. If you are overwhelmed by workload heavily and cannot take a breath from it, why not choose our JN0-364 preparation torrent? We are specialized in providing our customers with the most reliable and accurate exam materials and help them pass their exams by achieve their satisfied scores. With our JN0-364 practice materials, your exam will be a piece of cake.
NEW QUESTION # 174
Which two statements about graceful restart are correct? (Choose two.)
Answer: A,C
Explanation:
Graceful Restart (GR)is a high-availability mechanism designed to minimize the impact of a routing protocol process (rpd) restart or a Routing Engine (RE) switchover. It allows a router to continue forwarding traffic while the control plane is recovering, provided that the data plane (Packet Forwarding Engine) remains intact.
According to Juniper Networks documentation, Graceful Restart operates in two distinct roles:
* Restarting Mode:This is the role of the router that is actually undergoing the restart. In Junos OS, this mode isnot enabled by default (Option A). An administrator must explicitly configure graceful-restart under the [edit routing-options] hierarchy to allow the router to signal its neighbors that it is attempting a graceful recovery.
* Helper Mode:This is the role of the neighboring routers. When a neighbor sees a router restart, if it is in "helper mode," it will continue to forward traffic toward the restarting router and will not flush the associated routes from its forwarding table for a specified period. In Junos,helper mode is enabled by default (Option B)for most protocols (OSPF, BGP, IS-IS). This means that even if you haven't configured GR on your own router, it will automatically assist its neighbors if they perform a graceful restart.
Why other options are incorrect:
* Option C:WhileGRES (Graceful Routing Engine Switchover)is often usedwithGraceful Restart to handle hardware-level RE failures, they are independent features. GR can function during a simple software process restart without dual REs or GRES.
* Option D:Nonstop Bridging (NSB)is a separate high-availability feature for Layer 2 protocols (like STP). While it shares a similar goal, Graceful Restart is specifically a Layer 3 protocol mechanism (Layer 2 does not use "helper" routers in the same way).
NEW QUESTION # 175
Referring to the exhibit. You are advertising a summary route that represents your local network (172.20.0.0716) to both ISP A and ISPB. You want to influence all traffic sent to you from ISP C to go through R2.
How would you accomplish this task?
Answer: D
Explanation:
To influence ISP C to prefer the path through R2 for the 172.20.0.0/16 network, R2 should make its path less preferable to ISP B by prepending its AS number multiple times. This makes the path through R2 appear longer and less desirable to ISP C, which would receive these updates from ISP B. AS path length is a well-known attribute in BGP and is used to determine the best path; paths with a longer AS path are considered less preferable.
NEW QUESTION # 176
Exhibit:
Referring to the exhibit, R1 and R2 are advertising the same prefix 203.0.113.0/24 to R3 and R4 over EBGP. R3 and R4 both advertise this prefix to R5. Which advertisement does R5 choose to install in its routing table?
Answer: B
Explanation:
In a Juniper Networks environment, when a router receives multiple BGP paths for the same destination prefix, it utilizes theBGP Path Selection Algorithmto determine the single "best" path to install in the routing table and advertise to other peers. This selection process follows a strict hierarchy of attributes.
According to Juniper Networks technical documentation, the very first attribute evaluated by the BGP process (after ensuring the next hop is reachable) is theLocal Preference. Local preference is a well-known discretionary attribute used to communicate a preference for a specific exit point from the local Autonomous System (AS). A higher local preference value is always preferred over a lower one.
Analyzing the exhibit:
* R3receives the prefix from R1 and applies an export policy to its IBGP session that sets thelocal preference to 150.
* R4receives the same prefix from R2 and applies an export policy to its IBGP session that sets thelocal preference to 200.
* R5receives both of these IBGP updates from R3 and R4.
When R5 runs the best-path algorithm for the 203.0.113.0/24 prefix, it compares the local preference values.
Since the path from R4 has a local preference of 200 and the path from R3 has a local preference of 150, R5 immediately selects the path fromR4as the best route. Because BGP is designed to prevent loops and maintain a consistent view, only this single best path is installed as the active route in R5's routing table (inet.0).
Options B and D are incorrect because they imply multiple paths are installed for forwarding, which only occurs if specific multipath load-balancing is configured, which is not indicated here.
NEW QUESTION # 177
You are designing an MPLS network and want to ensure that traffic traverses an LSP between PE routers that follow an explicit path through the core.
Which protocol would accomplish this task?
Answer: C
Explanation:
RSVP-TE is used to signal MPLS traffic-engineered LSPs and supports explicit path configuration. This allows you to define the exact sequence of core hops the LSP must follow between PE routers, ensuring traffic traverses the desired path rather than simply following the IGP shortest path.
NEW QUESTION # 178
Click the Exhibit button. Referring to the exhibit, which two statements are true? (Choose two.)
Answer: A,D
Explanation:
The configuration places the interface in VLAN membership for VLAN ID 10, meaning it is part of the VLAN that uses VLAN ID 10. With ethernet-switching and VLAN membership specified, the port expects frames associated with that VLAN, which are carried as tagged frames for that VLAN.
NEW QUESTION # 179
......
Our experts who compiled the JN0-364 practice materials are assiduously over so many years in this filed. They add the new questions into the JN0-364 study guide once the updates come in the market, so they recompose the contents according to the syllabus and the trend being relentless in recent years. With so accurate information of our JN0-364 learning questions, we can confirm your success by your first attempt.
Downloadable JN0-364 PDF: https://www.examslabs.com/Juniper/JNCIS-SP/best-JN0-364-exam-dumps.html
P.S. Free 2026 Juniper JN0-364 dumps are available on Google Drive shared by ExamsLabs: https://drive.google.com/open?id=1XYj0_1CmLFUnTP9pGg-Cf5PXwumAB4Gd