Test SRAN-Radio-Network-Performance-Optimization Pdf - SRAN-Radio-Network-Performance-Optimization Valid Braindumps Book

The SRAN-Radio-Network-Performance-Optimization vce braindumps of our BraindumpStudy contain questions and correct answers and detailed answer explanations and analysis, which apply to any level of candidates. Our IT experts has studied Nokia real exam for long time and created professional study guide. So you will pass the test with high rate If you practice the SRAN-Radio-Network-Performance-Optimization Dumps latest seriously and skillfully.

Nokia SRAN-Radio-Network-Performance-Optimization Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: SRAN Architecture and Fundamentals	15-20%	- SRAN solution components and functions - Single RAN integration principles - SRAN network architecture overview - Radio access concepts and principles
Topic 2: SRAN Optimization Tools and Reports	10-15%	- Report generation and interpretation - Configuration management for optimization - Nokia NetAct and performance tools - Automated optimization features
Topic 3: Radio Network Optimization Techniques	25-30%	- Load balancing techniques - Coverage optimization methods - Interference analysis and mitigation - Parameter tuning best practices - Handover optimization - Capacity optimization strategies
Topic 4: Performance Troubleshooting	20-25%	- Common performance issues diagnosis - Root cause analysis methodologies - Optimization case studies - Troubleshooting tools utilization - Network failure identification and resolution
Topic 5: Radio Network Performance Monitoring	20-25%	- Performance monitoring tools and dashboards - Real-time network monitoring techniques - Threshold configuration and alerting - KPI definition and measurement - Performance data collection and analysis

>> Test SRAN-Radio-Network-Performance-Optimization Pdf <<

Nokia SRAN-Radio-Network-Performance-Optimization Valid Braindumps Book & SRAN-Radio-Network-Performance-Optimization High Quality

You must have thought about moving forward successfully in this competitive and fast-changing technological world. If you want to boost your career Nokia SRAN-Radio-Network-Performance-Optimization certification is the most acclaimed and honorable certificate in the tech sector. But the confusion regarding the preparation and relevant Nokia SRAN-Radio-Network-Performance-Optimization Practice Test questions must have emerged in your mind too.

Nokia MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 Sample Questions (Q17-Q22):

NEW QUESTION # 17
During an intra-gNB DU handover , what is the role of the RRC Reconfiguration message sent by the gNB- CU to the UE?

A. It reestablishes the RLC layer and recovers PDCP PDUs for uplink data.
B. It confirms admission control and suspends UE scheduling in the source cell.
C. It instructs the UE to perform handover to the target PCell and provides measurement configuration.
D. It transfers user-plane resources and allocates a dedicated preamble index.

Answer: C

Explanation:
The correct answer is A .
During an intra-gNB DU handover , the UE is moved from one cell/DU resource to another under the same gNB-CU control. The gNB-CU coordinates the handover preparation and sends an RRC Reconfiguration message to the UE.
The role of this message is to provide the UE with the required handover command information, such as:
Target PCell configuration
Radio resource configuration
Mobility control information
Random access configuration, when needed
Measurement or reconfiguration-related information
After receiving the RRC Reconfiguration , the UE performs the handover execution procedure toward the target cell and later responds with RRC Reconfiguration Complete .
Option B is incorrect because admission control and source-cell scheduling suspension are internal network- side procedures, not the UE-facing role of the RRC Reconfiguration message.
Option C is not the best answer because user-plane resource transfer is handled between gNB-CU/gNB-DU functions, while dedicated preamble allocation may be part of the configuration but is not the main purpose of the message.
Option D is incorrect because RLC reestablishment and PDCP recovery are lower-layer/user-plane handling actions, not the primary purpose of the RRC Reconfiguration message.
Therefore, the correct role is:
It instructs the UE to perform handover to the target PCell and provides measurement/configuration information.

NEW QUESTION # 18
When selecting an LTE anchor layer for EN-DC , why is it important to check 3GPP band combinations ?

A. To avoid configuring LTE with higher bandwidths
B. To guarantee dual-uplink transmission support for all UE models
C. To ensure that LTE and NR bands are compatible and allowed as EN-DC pairs
D. To reduce the number of BTS neighbors required for 5G integration

Answer: C

Explanation:
The correct answer is B .
In 5G NSA EN-DC , the UE connects to LTE as the Master Cell Group , or anchor, and NR as the Secondary Cell Group . Not every LTE band can be paired with every NR band. The supported LTE-NR combinations are defined by 3GPP band-combination rules and must also be supported by the UE chipset and device capability.
For example, an operator may have LTE Band 3, Band 7, or Band 20 and NR n78, but only certain LTE-NR combinations may be valid for EN-DC. If the selected LTE anchor band is not supported in combination with the NR band, the UE will not be able to establish EN-DC even if LTE and NR coverage both exist.
Option C is not correct because dual-uplink support depends on UE capability and specific band-combination support; it cannot be guaranteed for all UE models. Option A and D are unrelated to the main purpose of checking 3GPP band combinations.
So the correct reason is:
To ensure that LTE and NR bands are compatible and allowed as EN-DC pairs.

NEW QUESTION # 19
Which statement is not true about MantaRay SON ?

A. It was previously known as EdenNet SON.
B. It has an open framework for module development.
C. Energy savings management is not covered.
D. It supports multi-vendor and multi-technology RAN.

Answer: C

Explanation:
The correct answer is B .
The statement "Energy savings management is not covered" is not true . Nokia describes MantaRay SON as supporting radio network performance, quality, and energy efficiency optimization. Nokia also references AI-powered energy savings management and RAN energy efficiency use cases under its SON/MantaRay automation portfolio.
The other statements are aligned with Nokia SON/MantaRay positioning. Nokia describes MantaRay SON as an automation layer within the MantaRay SMO framework, with support for multi-supplier/non-real-time RIC functionality and an application ecosystem. Nokia also has historical EdenNet SON material, including EdenNet SON Energy Saving Management.
Therefore, the statement that is not true is:
Energy savings management is not covered.

NEW QUESTION # 20
What is the role of admission control in 5G networks ?

A. To optimize the downlink throughput
B. To check whether there are enough resources for new connections
C. To increase the spectral efficiency
D. To manage the modulation schemes

Answer: B

Explanation:
The correct answer is D .
Admission control is responsible for deciding whether a new UE connection, bearer, service, or session can be accepted by the cell without negatively affecting existing users and services.
In 5G RAN, admission control checks available radio resources such as:
* PRB availability
* PDCCH/PUCCH capacity
* UE context capacity
* QoS requirements
* GBR or non-GBR bearer requirements
* Cell load and congestion status
It does not directly manage modulation schemes; that is handled by link adaptation. It also does not directly increase spectral efficiency or optimize downlink throughput, although good admission control indirectly protects user experience and avoids overload.
So the main role of admission control is:
To check whether there are enough resources for new connections.

NEW QUESTION # 21
Which port must be opened in NetAct for the connection from TraceSynthesis to NetAct?

A. 0
B. 1
C. 2
D. 3

Answer: B

Explanation:
The correct answer is B .
The connection from TraceSynthesis to NetAct is typically based on secure web/API communication, which uses HTTPS . The standard HTTPS port is 443 . Therefore, port 443 must be opened in NetAct/firewall rules to allow TraceSynthesis to communicate with NetAct.
The other options are not the best answer:
8443 is often used as an alternative HTTPS/application-server port, but it is not the standard answer here.
22 is used for SSH, mainly for secure shell access or file transfer.
8080 is commonly used for unsecured HTTP or proxy/application access, not the secure NetAct connection expected here.
So the required port is:
443.

NEW QUESTION # 22
......

As soon as you enter the learning interface of our system and start practicing our Nokia SRAN-Radio-Network-Performance-Optimization learning materials on our Windows software, you will find small buttons on the interface. These buttons show answers, and you can choose to hide answers during your learning of our Nokia SRAN-Radio-Network-Performance-Optimization Exam Quiz so as not to interfere with your learning process.

SRAN-Radio-Network-Performance-Optimization Valid Braindumps Book: https://www.braindumpstudy.com/SRAN-Radio-Network-Performance-Optimization_braindumps.html