DOWNLOAD the newest Itcertking F5CAB3 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1xsWudaqb1KIjbWpTHxkTEwztr1nmpezC
Once you enter into our interface, nothing will disturb your learning the F5CAB3 training engine except the questions and answers. So all you attention will be concentrated on study. At the same time, each process is easy for you to understand. There will have small buttons on the F5CAB3 Exam simulation to help you switch between the different pages. It does not matter whether you can operate the computers well. Our F5CAB3 training engine will never make you confused.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
The unmatched and the most workable study guides of Itcertking are your real destination to achieve your goal. The pathway to pass F5CAB3 was not so easy and perfectly reliable as it has become now with the help of our products. Just you need to spend a few hours daily for two week and you can surely get the best insight of the syllabus and command over it. The F5CAB3 Questions and answers in the guide are meant to deliver you simplified and the most up to date information in as fewer words as possible.
NEW QUESTION # 59
Refer to the exhibit.
DNS queries from two internal DNS servers are being load-balanced to external DNS servers via a virtual server on a BIG-IP device. The DNS queries originate from:
192.168.10.100
192.168.10.200
and target:
192.168.2.150
All DNS queries destined for the external DNS servers fail.
Which property change should the BIG-IP Administrator make in the Virtual Server to resolve this issue?
(Choose one answer)
Answer: C
Explanation:
DNS traffic is primarily transported using UDP port 53. In the exhibit, the Virtual Server is configured with the Protocol set to TCP, which prevents standard DNS queries from being processed correctly. BIG-IP Virtual Servers must be configured with the correct Layer 4 protocol to match the application traffic they are handling.
According to the BIG-IP Administration: Data Plane Configuration documentation:
The Protocol setting on a Virtual Server defines whether traffic is processed as TCP, UDP, or another supported transport protocol.
Standard DNS queries and responses use UDP, while TCP is only required for DNS zone transfers (AXFR) or exceptionally large responses.
When a DNS Virtual Server is incorrectly configured with TCP, UDP-based DNS queries are dropped, causing all requests to fail.
Why the other options are incorrect:
A). Protocol profile (Client) to DNS_OPTIMIZEDA DNS profile enhances DNS functionality but does not correct an incorrect transport protocol configuration.
B). Type to Performance (HTTP)Performance (HTTP) Virtual Servers are designed for HTTP traffic and are not suitable for DNS services.
C). Source Address to 192.168.10.0/24The existing source IPs already fall within the allowed range, so this setting does not address the failure.
Correct Resolution:
Changing the Protocol to UDP aligns the Virtual Server with standard DNS transport requirements, allowing DNS queries to be successfully processed and load-balanced.
NEW QUESTION # 60
A Standard Virtual Server is configured with SNAT Automap. Backend servers must see the original client IP.
What should be configured?
Answer: D
Explanation:
X-Forwarded-For inserts the original client IP into HTTP headers, preserving client identity while SNAT is enabled.
NEW QUESTION # 61
The BIG-IP Administrator is investigating whether better TCP performance is possible for a virtual server.
Which built-in profile should be tried first? (Choose one answer)
Answer: B
Explanation:
BIG-IP provides several built-in TCP profiles optimized for different traffic patterns and network conditions.
When attempting to improve general TCP performance, the recommended starting point is f5-tcp-progressive.
According to the BIG-IP Administration: Data Plane Configuration documentation:
* f5-tcp-progressive is designed as a balanced, general-purpose TCP optimization profile.
* It dynamically adjusts TCP behavior to improve throughput and latency for most enterprise applications.
* It is the recommended first-choice profile when tuning TCP performance before moving to more specialized profiles.
Why the other options are incorrect:
* A. f5-tcp-legacyThis profile exists for backward compatibility and does not include modern TCP optimizations.
* C. f5-tcp-mobileThis profile is optimized specifically for high-latency, lossy mobile networks and is not suitable for general-purpose environments.
* D. No optionBIG-IP explicitly provides built-in TCP profiles for performance tuning; using none would forgo optimization opportunities.
Correct Resolution:
The administrator should first apply f5-tcp-progressive to evaluate potential TCP performance improvements before considering more specialized profiles.
NEW QUESTION # 62
A Standard Virtual Server for a web application is configured with Automap for the Source Address Translation option. The original source address of the client must be known by the backend servers. What should the BIG-IP Administrator configure to meet this requirement?
Answer: C
Explanation:
SNAT Automap is a common configuration that replaces the client's original source IP address with one of the BIG-IP's self IP addresses. This ensures that the backend servers send return traffic back through the BIG- IP, which is necessary for the ADC to process the traffic correctly. However, a side effect of SNAT is that the backend servers only see the BIG-IP's IP in their logs, losing visibility into the true identity of the client.
To resolve this while still using SNAT for routing purposes, the administrator must configure the BIG-IP to
"pass" the client's IP address at the application layer. This is achieved by using an HTTP Profile with the Insert X-Forwarded-For setting enabled. When this profile is applied to the Virtual Server, the BIG-IP intercepts the HTTP request, adds a header (X-Forwarded-For) containing the client's original IP, and then forwards the modified request to the server. The backend web server can then be configured to read this header and log the original client IP instead of the BIG-IP's SNAT address.
Other options are incorrect for this requirement. Performance (HTTP) (Option A) is a virtual server type optimized for speed but often lacks the full Layer 7 header manipulation capabilities of a Standard Virtual Server. SNAT Pool with the client IP (Option C) is technically impossible as SNAT pools use static, pre- defined IPs. There is no such thing as an HTTP Transparent profile (Option D) in standard BIG-IP administration for this purpose. The X-Forwarded-For header insertion within the HTTP profile is the standard procedural method for maintaining client visibility in SNAT-enabled environments.
NEW QUESTION # 63
Refer to the exhibit.
DNS queries from two internal DNS servers are being load balanced to external DNS servers via a Virtual Server on a BIG-IP device. The DNS queries originate from 192.168.101.100 and 192.168.101.200 and target
192.168.21.50 .
All DNS queries destined for the external DNS servers fail.
Which property change should the BIG-IP Administrator make in the Virtual Server to resolve this issue?
Answer: C
Explanation:
The virtual server is configured for destination 192.168.21.50 , service port 53 , but its Protocol is TCP .
Standard DNS query traffic is normally sent using UDP port 53 . Because virtual-server traffic matching includes the configured IP protocol, UDP DNS packets will not match a virtual server configured exclusively for TCP, causing the queries to fail.
F5 ' s DNS configuration guidance explicitly instructs administrators creating a DNS query virtual server to configure service port 53 and select UDP as the protocol. F5 also recommends separate TCP and UDP virtual servers when both forms of DNS traffic must be supported; TCP port 53 is particularly relevant for operations such as DNS zone transfers.
Option C is not required. The existing source network 192.168.100.0/23 spans addresses from 192.168.100.0 through 192.168.101.255, so both 192.168.101.100 and 192.168.101.200 are already permitted by the source- address criterion. F5 documents that the Source Address setting can specify the network from which a virtual server accepts traffic.
Therefore, changing the virtual server ' s Protocol from TCP to UDP corrects the traffic-matching problem.
Reference Topics: Virtual Server traffic matching; Protocol selection; DNS over UDP/TCP; Source Address matching; Service Port 53.
NEW QUESTION # 64
......
All kinds of exams are changing with dynamic society because the requirements are changing all the time. To keep up with the newest regulations of the BIG-IP Administration Data Plane Configuration exam, our experts keep their eyes focusing on it. Expert team not only provides the high quality for the F5CAB3 Quiz guide consulting, also help users solve problems at the same time, leak fill a vacancy, and finally to deepen the user's impression, to solve the problem of F5CAB3 test material and no longer make the same mistake.
F5CAB3 Exam Score: https://www.itcertking.com/F5CAB3_exam.html
P.S. Free 2026 F5 F5CAB3 dumps are available on Google Drive shared by Itcertking: https://drive.google.com/open?id=1xsWudaqb1KIjbWpTHxkTEwztr1nmpezC