We often regard learning as a torture. Actually, learning also can become a pleasant process. With the development of technology, learning methods also take place great changes. Take our NSEI_OTS_AR-7.6 practice material for example. All of your study can be completed on your computers because we have developed a kind of software which includes all the knowledge of the NSEI_OTS_AR-7.6 exam. The simulated and interactive learning environment of our test engine will greatly arouse your learning interests. You will never feel boring and humdrum. Your strong motivation will help you learn effectively. If you are tired of memorizing the dull knowledge point, our NSEI_OTS_AR-7.6 Test Engine will assist you find the pleasure of learning. Time is priceless. Learn something when you are still young. Then you will not regret when you are growing older.
| Section | Weight | Objectives |
|---|---|---|
| Network Security | 25% | - Virtual patching for legacy OT systems - Security automation and threat response - Deep inspection for industrial protocols (Modbus, DNP3, OPC) |
| Network Access Control | 25% | - OT Ethernet and industrial communication models - Authentication and access policies for OT devices - Purdue Model and secure network segmentation |
| Asset Management | 25% | - Fortinet Security Fabric for OT environments - Device detection and inventory using FortiGate & FortiNAC - OT security standards and compliance (IEC 62443, NIST) |
| Monitoring and Risk Assessment | 25% | - Threat detection using FortiSIEM 7.4 - OT-focused risk assessment and management - Event handling and logging with FortiAnalyzer 7.6 |
>> Reliable NSEI_OTS_AR-7.6 Exam Topics <<
We trounce many peers in this industry by our justifiably excellent NSEI_OTS_AR-7.6 training guide and considerate services. So our NSEI_OTS_AR-7.6 exam prep receives a tremendous ovation in market over twenty years. All these years, we have helped tens of thousands of exam candidates achieve success greatly. For all content of our NSEI_OTS_AR-7.6 Learning Materials are strictly written and tested by our customers as well as the market. Come to try and you will be satisfied!
NEW QUESTION # 13
Refer to the exhibit.
Based on the information provided on the partial Event Monitor page shown in the exhibit, how was the attack detected? (Choose one answer)
Answer: B
Explanation:
The correct answer is D. Automatically by an event handler . The study guide explicitly states that "Event handlers generate events on FortiAnalyzer" and "FortiAnalyzer uses event handlers to filter all incoming logs. If the logs received match the conditions set in the event handlers, FortiAnalyzer generates an event." It also says "You can view all generated events on the Event Monitor page." This directly matches the exhibit, which is showing entries on the Event Monitor page. Therefore, the attack shown there was detected automatically through an event handler .
The guide also explains the detection flow: "FortiAnalyzer receives logs," "FortiAnalyzer parses logs," and "FortiAnalyzer generates an event if a rule is matched in an event handler." In addition, the Event Monitor view includes the Handler column, which identifies the event handler that generated the event. That is why the attack is not considered manually detected, and it is not primarily detected by a playbook or stitch.
Playbooks and stitches are used for subsequent automation actions, but the event appearing in Event Monitor is created by the event handler mechanism.
NEW QUESTION # 14
Refer to the exhibits.
A partial view of the Playbook Monitor page and the corresponding playbook configuration are shown.
Based on the monitor page and the configuration of the playbook, what has triggered the Run_Report task?
(Choose one answer)
Answer: B
Explanation:
Based on the provided exhibits from the FortiAnalyzer playbook engine:
* Playbook Trigger Condition : The Partial Playbook configuration exhibit shows that the playbook is set to trigger based on a condition where the Basic Handler Name is Equal To IPS_Attack_Handling.
* Event vs. Log : In FortiAnalyzer, the field Basic Handler Name is a property of an Event record, indicating the specific Event Handler that generated it. A playbook configured with this condition is triggered by an Event , not directly by a raw log.
* Playbook Execution Flow : The Partial Playbook Monitor view shows the execution sequence:
* Event_Trigger (Starter) : This is the entry point of the playbook, which matches the condition defined in the configuration.
* IPS_Attack_Incident : The first task executed after the trigger.
* Run_Report : The task in question, which is executed as part of the automated workflow initiated by the starter.
* Conclusion : Since the playbook ' s " Starter " is defined by the IPS_Attack_Handling handler name, an event produced by that handler is the root trigger for the entire playbook execution, including the Run_Report task.
Therefore, the Run_Report task was triggered (as part of the playbook) by an IPS_Attack_Handling event .
NEW QUESTION # 15
In your OT environment, you want to detect the devices passively. Which two methods must you implement?
(Choose two answers)
Answer: A,C
Explanation:
The correct answers are C. Vendor OUI and D. Network traffic .
The study guide explicitly separates active/direct profiling methods from passive/non-direct methods and states that "In OT environments, passive methods are preferred over active methods." It then lists the methods that do not require FortiNAC to interact directly with the device being profiled. Among those methods are "Network traffic: gathered from the infrastructure" and "Vendor OUI: determined by the MAC address gathered from the infrastructure." That directly matches options C and D .
Options A and B are incorrect because SSH and SNMP are shown in the guide under the direct/active profiling methods. The guide's point is that passive detection avoids directly scanning or interacting with OT endpoints, since that can negatively affect performance in industrial environments. Because the question specifically asks for passive detection methods, the correct pair is Vendor OUI and Network traffic .
NEW QUESTION # 16
During layer 2 polling , which two pieces of information are gathered by FortiNAC to identify a device?
(Choose two answers)
Answer: A,B
Explanation:
According to the OT Security 7.6 Architect study guide section on Asset Management , specifically regarding FortiNAC Visibility :
* Layer 2 Polling Data : Because each physical address is unique, FortiNAC identifies hosts as they connect to the network. The information gathered during this process fills in the physical address and location information in the database.
* Visibility Components : The guide states that the physical address learned , the time it was learned , and where it was learned from provide the foundation of endpoint visibility in the form of " what, where, and when " information. This confirms that Where it was learned (Option A) and The time it was learned (Option D) are correct.
* Exclusions :
* Layer 3 Polling : The MAC-to-IP correlation (Option B) is explicitly defined as a function of Layer 3 polling , where the correlated IP address is added to the database record for the corresponding MAC address.
* DHCP Fingerprinting : The host name or system name (Option C) and the operating system are gathered via DHCP fingerprinting , not layer 2 polling.
NEW QUESTION # 17
Refer to the exhibit.
A partial Incident Analysis page is shown. How was the 360-Degree Security Review OT report attached to the incident? (Choose one answer)
Answer: B
Explanation:
The study guide says playbooks are used to automate tasks such as running reports and creating/updating incidents . It also says that after a playbook is triggered, it flows through its configured tasks.
It further shows a sample playbook sequence where an event is detected, an incident is created , a report runs , and details are attached to the incident . That is exactly the kind of workflow shown in the incident analysis view.
By contrast, the study guide says event handlers generate events when logs match configured rules. Event handlers are for detection, not for attaching reports to incidents.
NEW QUESTION # 18
......
Our NSEI_OTS_AR-7.6 study materials are compiled and tested by our expert. NSEI_OTS_AR-7.6 try hard to makes NSEI_OTS_AR-7.6 exam preparation easy with its several quality features. We send learning information in the form of questions and answers, and our NSEI_OTS_AR-7.6 study materials are highly relevant to what you need to pass NSEI_OTS_AR-7.6 certification exam. Our free demo will show you the actual NSEI_OTS_AR-7.6 Certification Exam. You can learn about real exams in advance by studying our NSEI_OTS_AR-7.6 study materials and improve your confidence in the exam so that you can pass NSEI_OTS_AR-7.6 exams with ease. This is also the reason that has been popular by the majority of candidates.
Certification NSEI_OTS_AR-7.6 Exam Dumps: https://www.dumpsfree.com/NSEI_OTS_AR-7.6-valid-exam.html