The Dumpkiller is a leading platform that has been offering top-rated and real Designing Cisco Wireless Networks (300-110) exam questions for quick Designing Cisco Wireless Networks Certification Exam. The 300-110 exam questions are designed and verified by experienced and certified 300-110 Exam trainers. They work collectively and put all their efforts, experience, and knowledge and ensure the top standard of 300-110 exam questions all the time.
| Section | Weight | Objectives |
|---|---|---|
| Mobility | 25% | - Optimize client roaming - Site Tags - Design mobility groups - Validate mobility tunneling |
| Wireless Site Survey | 25% | - Collect design requirements and evaluate constraints - Pre-deployment site survey - Material attenuation and its design effects - Post-deployment site survey - Predictive site survey - Planning tools and network metrics evaluation - Layer 1 site survey analysis |
| Wired and Wireless Infrastructure | 30% | - Physical infrastructure requirements - Design high-density wireless networks - Design for data, voice, video, location - Logical infrastructure requirements - Design wireless bridging (mesh) - Design radio management |
| WLAN High Availability | 20% | - Design AP high availability - Design controller high availability |
>> Cisco 300-110 Valid Test Book <<
Not only our 300-110 study guide has the advantage of high-quality, but also has reasonable prices that are accessible for every one of you. So it is incumbent upon us to support you. On the other side, we know the consumers are vulnerable for many exam candidates are susceptible to ads that boost about 300-110 skills their practice with low quality which may confuse exam candidates like you, so we are trying hard to promote our high quality 300-110 study guide to more people.
NEW QUESTION # 17
An engineer is designing guest access where guest traffic from foreign controllers on the internal network must terminate in the DMZ. Which two requirements must the design satisfy? (Choose two.)
Answer: A,C
Explanation:
Auto-anchor guest tunneling requires that the guest WLAN be configured identically on both the foreign and anchor controllers (Option B) - the SSID, security settings, and WLAN ID must match, because the anchor applies its own policy to the tunneled session and a mismatch causes the client to be dropped or assigned incorrect policy. A mobility tunnel between the two controllers (Option D) is the transport that carries the guest traffic from the internal foreign controller to the DMZ anchor, allowing the client's data to bypass the internal network entirely and terminate on the DMZ segment. Controllers must be configured as mobility peers of each other, but they do not need to share a mobility group name for auto-anchor to function, and they explicitly do not need to be in the same Layer 2 VLAN - the whole point of the design is that the anchor sits in a separate, firewalled DMZ subnet. RF group leadership is unrelated to guest tunneling.
NEW QUESTION # 18
A wireless engineer is getting ready to perform a predictive site survey. The new network needs to support data and voice over wireless. Which two Cisco recommendations should be considered for the design?
(Choose two.)
Answer: B,E
Explanation:
For a network supporting both data and voice over wireless, two key Cisco design recommendations apply.
First, the 5 GHz radio band is recommended for voice over wireless due to its wider channel bandwidths, allowing for higher data rates and better quality of service for latency-sensitive applications. 40 MHz channels in the 5 GHz band provide significantly higher throughput than 20 MHz channels in 2.4 GHz, making Option B correct for the bandwidth reason stated. Second, setting the cell boundary to -67 dBm ensures sufficient signal strength for reliable voice communication at the cell edge, which is the Cisco standard threshold for VoWLAN coverage. Options C and E are partially correct (24 non-overlapping channels is accurate, 15-20% overlap is standard) but B and D are the primary Cisco recommendations that define the design targets for a predictive survey supporting voice. Reference: WLSD Study Guide - VoWLAN Design Requirements, Predictive Survey Design Criteria, 5 GHz Band Selection.
NEW QUESTION # 19
A network engineer is configuring high availability on an access point. What is the maximum number of controllers that can be configured?
Answer: C
Explanation:
When configuring high availability on a Cisco access point, the AP can be configured with a maximum of three controllers: a primary controller, a secondary controller, and a tertiary controller. This three-tier hierarchy defines the failover order - the AP first attempts to join its primary controller, then the secondary if the primary is unavailable, and finally the tertiary if both the primary and secondary are unreachable. After exhausting all three configured options, the AP enters a discovery process to find any available controller.
This three-controller configuration (primary, secondary, tertiary) allows network engineers to implement N+1 redundancy where critical APs can be directed to specific backup controllers in a deliberate sequence.
Limiting the configuration to only 2 controllers (as stated in Option B which would be incorrect) would reduce redundancy options for environments with geographically distributed controllers requiring specific failover paths. Reference: WLSD Study Guide - AP High Availability Configuration, Primary/Secondary
/Tertiary Controller Assignment, AP Failover Design.
NEW QUESTION # 20
An engineer is designing coverage for a distribution warehouse with 12 m ceilings and metal racking that reaches 10 m. Which antenna design approach should be used?
Answer: A
Explanation:
In a high-bay warehouse, an omnidirectional antenna mounted at the ceiling radiates most of its energy horizontally across the top of the racking, where no clients exist, while the aisles below sit in the antenna's null. Metal racking and dense inventory further block any signal that does propagate downward. High-gain directional antennas - typically patch or narrow-beam downtilt models - concentrate energy into a defined pattern that can be aimed down the aisle or vertically into the picking area, delivering usable signal to scanners and forklift terminals at floor level while limiting spill into adjacent aisles. That containment also improves channel reuse in a space that is otherwise one large open volume. Mounting APs facing upward or at floor level places the antenna where it will be blocked or physically damaged, and low-gain omnidirectional antennas lack the pattern control this environment demands.
NEW QUESTION # 21
A customer has two Cisco WLCs configured in a SSO cluster. The wireless network supports a large warehouse. The customer purchases new iPads to replace legacy scanners. Both devices connect to a single SSID named Scanning by using WPA2 Personal. The customer wants to use a standards-based method for fast roaming on the new iPads. Which approach meets the scanner requirement and still supports the legacy scanners?
Answer: B
Explanation:
The design challenge is enabling IEEE 802.11r Fast BSS Transition for the new iPads (the standards-based fast roaming method) while maintaining backward compatibility for legacy RF scanners that may not support
802.11r. The SSID uses WPA2 Personal (PSK), not 802.1X enterprise authentication - therefore the correct Fast Transition variant is FT PSK (pre-shared key), not FT 802.1X (Options A and B). The critical configuration parameter is setting Fast Transition to Adaptive mode rather than mandatory. Adaptive mode is a Cisco feature that allows the AP and SSID to support both 802.11r-capable clients (which will use FT PSK for fast roaming) and non-802.11r legacy clients (which will use the standard pre-FT roaming process). In Adaptive mode, legacy scanners that cannot negotiate 802.11r during association will fall back transparently to standard roaming, while the new iPads leverage FT PSK for minimal-interruption handoffs. If Fast Transition is set to mandatory, legacy clients that do not support 802.11r will fail to associate entirely. Option C uses optimized roaming globally, which is a different mechanism and does not address the iPads ' specific need for a standards-based fast roaming solution. Reference: WLSD Study Guide - 802.11r Fast BSS Transition, FT PSK Configuration, Adaptive Fast Transition for Mixed Client Environments.
NEW QUESTION # 22
......
We provide Cisco 300-110 web-based self-assessment practice software that will help you to prepare for the Cisco Designing Cisco Wireless Networks exam. Cisco 300-110 Web-based software offers computer-based assessment solutions to help you automate the entire Designing Cisco Wireless Networks exam testing procedure. The stylish and user-friendly interface works with all browsers, including Mozilla Firefox, Google Chrome, Opera, Safari, and Internet Explorer. It will make your Cisco 300-110 Exam Preparation simple, quick, and smart. So, rest certain that you will discover all you need to study for and pass the Cisco 300-110 exam on the first try.
Latest 300-110 Dumps Sheet: https://www.dumpkiller.com/300-110_braindumps.html