P.S. Free 2026 Nokia SRAN-Radio-Network-Performance-Optimization dumps are available on Google Drive shared by PassSureExam: https://drive.google.com/open?id=1PqlUhl1q8sEQ5OUB5V_BLTVRVzEBjRwB
No doubt the MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) certification is one of the most challenging certification exams in the market. This Nokia SRAN-Radio-Network-Performance-Optimization certification exam gives always a tough time to MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) exam candidates. The PassSureExam understands this hurdle and offers recommended and real Nokia SRAN-Radio-Network-Performance-Optimization exam practice questions in three different formats.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Advanced Optimization and SON Features | 10% | - Self-Organizing Networks (SON) use cases and optimization - Energy saving and advanced features |
| Topic 2: Coverage and Capacity Optimization | 30% | - Interference analysis and mitigation techniques - Coverage analysis, tuning and optimization - Capacity planning, load balancing and optimization |
| Topic 3: Mobility and Handover Optimization | 20% | - Mobility robustness and optimization - Inter-RAT mobility and optimization - Handover parameters and algorithms |
| Topic 4: SRAN Performance Optimization Fundamentals | 25% | - Performance optimization principles and methodology - Network performance monitoring and analysis tools - Key performance indicators (KPIs) definition and measurement |
| Topic 5: Quality of Service and Resource Management | 15% | - QoS parameters, scheduling and admission control - Radio resource management and optimization |
>> SRAN-Radio-Network-Performance-Optimization Pdf Dumps <<
PassSureExam is a very wonderful and effective platform to give chances to our worthy clients who want to achieve their expected scores and gain their SRAN-Radio-Network-Performance-Optimization certifications. With our professional experts’ tireless efforts, our SRAN-Radio-Network-Performance-Optimization exam guide is equipped with a simulated examination system with timing function, allowing you to examine your learning results at any time, keep checking for defects, and improve your strength. And you can be satisfied with our SRAN-Radio-Network-Performance-Optimization learning guide.
NEW QUESTION # 12
The slice type SST value for Extreme Broadband is typically:
Answer: C
Explanation:
The correct answer is B .
In 5G network slicing, SST means Slice/Service Type . It identifies the high-level service category of a network slice.
Typical standardized SST values are:
SST = 1 # eMBB, enhanced Mobile Broadband
SST = 2 # URLLC, Ultra-Reliable Low-Latency Communication
SST = 3 # MIoT/mMTC, Massive IoT or massive Machine Type Communication
SST = 4 # V2X-related slice type
"Extreme Broadband" is normally aligned with eMBB , because it refers to high data rate, high capacity, and broadband user experience.
Therefore, the SST value for Extreme Broadband is:
1.
NEW QUESTION # 13
Which parameter defines the PRACH format ?
Answer: D
Explanation:
The correct answer is B .
The prachConfigurationIndex defines the PRACH configuration, including the PRACH time-domain occasions and the associated PRACH format according to the PRACH configuration tables. In 5G NR, PRACH configuration is based on 3GPP-defined PRACH tables, where the configuration index maps to the PRACH format and PRACH occasion structure.
The other options have different meanings:
A). msg1-FrequencyStart defines the frequency-domain starting position of PRACH occasion resources.
C). prachRootSequenceIndex defines the root sequence used for PRACH preamble generation.
D). totalNumberOfRAPreambles defines how many random access preambles are available.
Therefore, the parameter that defines the PRACH format is:
prachConfigurationIndex.
NEW QUESTION # 14
At which mark are all conditions fulfilled for energy saving , so the cell will be switched off? Refer to the image below.
Answer: B
Explanation:
The correct answer is B , which corresponds to mark C in the diagram.
In the diagram, the energy-saving process follows these stages:
Before mark B , the cell is entering the power-saving period, but the required load condition has not yet been satisfied for the required duration.
At mark B , the measured load has gone below the configured threshold, but the cell is not switched off immediately. The system must confirm that the load remains below the required threshold for the configured time.
At mark C , the load has stayed below the required threshold for the required duration, shown as 5 minutes in the diagram. At this point, all conditions are fulfilled, and the cell can be switched off. The diagram also shows the state becoming:
energySavingState = energySaving
Marks D and E are already inside or near the later part of the power-saving period. Mark E is associated with operator suspension/exit behavior, not the initial moment when all switch-off conditions are first fulfilled.
NEW QUESTION # 15
Regarding the Vo5G / IMS voice and video over 5G feature, which statements are correct?
Answer: H
Explanation:
The correct answer is C: A, B, C, and D .
This question is about Vo5G / VoNR IMS service support in 5G SA. For IMS-based services over 5G, different QoS flows are used for signaling, voice media, and video media.
Statement A is correct.
The feature supports IMS voice and video over 5G in the gNB for FR1 , including both TDD and FDD deployments.
Statement B is correct.
IMS signaling commonly uses 5QI 5 . This QoS flow carries SIP/IMS signaling messages such as registration, session setup, modification, and release.
Statement C is correct.
IMS conversational voice uses 5QI 1 , which is the standardized GBR QoS identifier for conversational voice.
Statement D is correct.
IMS conversational video commonly uses 5QI 2 , which is associated with conversational video traffic.
NEW QUESTION # 16
In a high-mobility network, the maximum cell size must be restricted to 33 km . Which PRACH format and restricted-set type should be used?
Answer: A
Explanation:
The correct answer is Format 1 / Type B .
For PRACH planning, the selected preamble format must support the required cell radius. Format 0 is too short for a 33 km cell because it is typically suitable only up to around 14.5 km . Format 2 is also not suitable because its practical maximum cell radius is around 29.5 km , which is below the required 33 km . Therefore, a longer PRACH format is needed.
Because the scenario mentions high mobility , an unrestricted PRACH set is not preferred. High-mobility environments require a restricted set to handle Doppler effects and reduce ambiguity in PRACH preamble detection. Between the restricted-set options, Type B is the correct choice for this 33 km high-mobility case.
A matching Nokia-style question source also lists this exact scenario with Format 1 / Type B as option A.
NEW QUESTION # 17
......
The SRAN-Radio-Network-Performance-Optimization online exam simulator is the best way to prepare for the SRAN-Radio-Network-Performance-Optimization exam. PassSureExam has a huge selection of SRAN-Radio-Network-Performance-Optimization dumps and topics that you can choose from. The Nokia Exam Questions are categorized into specific areas, letting you focus on the SRAN-Radio-Network-Performance-Optimization subject areas you need to work on. Additionally, Nokia SRAN-Radio-Network-Performance-Optimization exam dumps are constantly updated with new SRAN-Radio-Network-Performance-Optimization questions to ensure you're always prepared for SRAN-Radio-Network-Performance-Optimization exam.
SRAN-Radio-Network-Performance-Optimization Frenquent Update: https://www.passsureexam.com/SRAN-Radio-Network-Performance-Optimization-pass4sure-exam-dumps.html
BTW, DOWNLOAD part of PassSureExam SRAN-Radio-Network-Performance-Optimization dumps from Cloud Storage: https://drive.google.com/open?id=1PqlUhl1q8sEQ5OUB5V_BLTVRVzEBjRwB