Now we can say that with the 300-110 Exam Dumps you will get the updated and verified Cisco 300-110 exam practice Test all the time. With the Designing Cisco Wireless Networks 300-110 Exam Questions, you will get the opportunity to download the updated and real Designing Cisco Wireless Networks 300-110 exam practice questions.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Wireless Site Survey | 25% | - Post-deployment site survey - Planning tools and network metrics evaluation - Predictive site survey - Pre-deployment site survey - Layer 1 site survey analysis - Collect design requirements and evaluate constraints - Material attenuation and its design effects |
| Topic 2: WLAN High Availability | 20% | - Design AP high availability - Design controller high availability |
| Topic 3: Mobility | 25% | - Site Tags - Design mobility groups - Validate mobility tunneling - Optimize client roaming |
| Topic 4: Wired and Wireless Infrastructure | 30% | - Logical infrastructure requirements - Design radio management - Design high-density wireless networks - Design wireless bridging (mesh) - Physical infrastructure requirements - Design for data, voice, video, location |
The Desktop Cisco 300-110 Practice Exam Software contains real Cisco 300-110 exam questions. This provides you with a realistic experience of being in an Cisco 300-110 examination setting. This feature assists you in becoming familiar with the layout of the Cisco 300-110 test and enhances your ability to do well on Designing Cisco Wireless Networks (300-110) examination.
NEW QUESTION # 29
An engineer is designing a solution where guests terminate on an anchor controller in the DMZ. The engineer is having issues and wants to test connectivity between members of a mobility group. Which two steps must be performed to test whether a mobility control packet can be reached over the management interface?
(Choose two.)
Answer: B,D
Explanation:
To test whether mobility control packets can reach between WLC peers in a mobility group (used to validate the anchor controller DMZ setup), two steps are required. First, the mping (mobility ping) command (Option A) is the Cisco WLC CLI tool specifically designed to test mobility control path connectivity between WLC peers. Running mping on both WLCs verifies that mobility control messages (UDP port 16666) can be exchanged bidirectionally. Second, UDP port 16666 must be open between the WLCs (Option C) - mping uses this port, and if it is blocked by a firewall (which is common when the anchor is in a DMZ), the mobility control path cannot be established. These two steps together - sending mping packets and confirming the firewall permits UDP 16666 - validate mobility control plane connectivity. The eping (EoIP ping) command (Option B) tests the data path tunnel, not the control path. IP Protocol 97 (Option D) is for the data plane in legacy mobility mode. Tracert (Option E) traces routing paths but does not validate mobility protocol connectivity. Reference: WLSD Study Guide - Mobility Group Troubleshooting, mping Command, UDP
16666 Firewall Requirements.
NEW QUESTION # 30
A customer has a Cisco wireless network that supports VoWLAN services. The customer wants supported voice clients to receive roaming recommendations and suggestions from APs. This functionality must not impact non-VoWLAN clients. What should be enabled on the VoWLAN SSID?
Answer: D
Explanation:
IEEE 802.11v BSS Transition Management is the standard that enables the network (via the AP) to actively provide roaming recommendations and suggestions to associated clients. When enabled on a SSID, the AP can send BSS Transition Management Request frames to clients, informing them of preferred target APs ranked by signal quality, load, and channel conditions. Critically, BSS Transition Management is a voluntary mechanism - clients that support 802.11v can act on the AP ' s recommendation, while clients that do not support 802.11v simply ignore the BSS Transition Request frames and continue operating normally. This selective applicability directly satisfies the requirement that non-VoWLAN clients must not be impacted.
802.11k (Option A) enables clients to build neighbor lists through measurement reports - this is a client- initiated process, not an AP-to-client recommendation. CCKM (Option B) is a Cisco proprietary fast roaming mechanism for legacy clients, unrelated to roaming guidance. 802.11r (Option D) accelerates the re- association handshake during roaming but does not provide proactive roaming recommendations. Reference:
WLSD Study Guide - VoWLAN Design, 802.11v BSS Transition Management, Roaming Optimization Protocols.
NEW QUESTION # 31
A conference center is designing a Wi-Fi 6 deployment for a room holding 2000 attendees, most of whom will use low-bandwidth applications. Which Wi-Fi 6 capability most directly improves efficiency in this scenario?
Answer: B
Explanation:
The defining problem in a high-density room with many low-bandwidth clients is not raw per-client throughput but the overhead of medium contention - under 802.11ac, each small packet requires a full channel access cycle, so the channel spends most of its airtime on contention and preamble rather than payload. OFDMA divides the channel into resource units so the AP can serve multiple clients within a single transmit opportunity, dramatically reducing per-frame overhead when the traffic mix is many small transmissions. This is precisely the profile of a conference audience running chat, email, and browsing. 1024-QAM raises peak modulation but only benefits clients already at very high signal levels and does nothing for contention. 160 MHz channel bonding is counterproductive in high density because it collapses the number of reusable channels. Target Wake Time improves client battery life by scheduling wake intervals, which is valuable for IoT but does not address the airtime efficiency problem in this design.
NEW QUESTION # 32
During a client roaming event, which device is responsible for communicating the new Layer 2 EID mapping of a wireless supplicant to the fabric domain?
Answer: A
Explanation:
During a client roaming event in a Cisco SD-Access fabric deployment, the Wireless LAN Controller (WLC) is responsible for communicating the new Layer 2 Endpoint ID (EID) mapping of a wireless supplicant to the fabric domain. In the SD-Access architecture, the WLC acts as a mobility orchestrator and serves as the interface between the wireless domain and the wired fabric. When a client roams from one AP to another, the WLC detects the roaming event and updates the fabric control plane with the new EID-to-RLOC (Routing Locator) mapping by notifying the fabric control plane node (CP). This ensures that the fabric knows the client ' s new location and can route traffic correctly without interruption. The Border Node (BN) handles traffic between the fabric and external networks. CP1 and CP2 are control plane nodes that maintain the mapping database but receive EID update notifications from the WLC - they do not initiate the EID mapping communication themselves. Reference: WLSD Study Guide - SD-Access Wireless Architecture, Client Roaming in Fabric Deployments, EID Mapping and Control Plane Notifications.
NEW QUESTION # 33
A network engineer is configuring high availability on an access point. What is the maximum number of controllers that can be configured?
Answer: B
Explanation:
When configuring high availability on a Cisco access point, the AP can be configured with a maximum of three controllers: a primary controller, a secondary controller, and a tertiary controller. This three-tier hierarchy defines the failover order - the AP first attempts to join its primary controller, then the secondary if the primary is unavailable, and finally the tertiary if both the primary and secondary are unreachable. After exhausting all three configured options, the AP enters a discovery process to find any available controller.
This three-controller configuration (primary, secondary, tertiary) allows network engineers to implement N+1 redundancy where critical APs can be directed to specific backup controllers in a deliberate sequence.
Limiting the configuration to only 2 controllers (as stated in Option B which would be incorrect) would reduce redundancy options for environments with geographically distributed controllers requiring specific failover paths. Reference: WLSD Study Guide - AP High Availability Configuration, Primary/Secondary
/Tertiary Controller Assignment, AP Failover Design.
NEW QUESTION # 34
......
When you choose to attempt the mock exam on the Cisco 300-110 practice software by DumpsReview, you have the leverage to custom the questions and attempt it at any time. Keeping a check on your Designing Cisco Wireless Networks exam preparation will make you aware of your strong and weak points. You can also identify your speed on the practice software by DumpsReview and thus manage time more efficiently in the actual Cisco exam.
Test 300-110 Cram: https://www.dumpsreview.com/300-110-exam-dumps-review.html