그리고 Fast2test CEDP 시험 문제집의 전체 버전을 클라우드 저장소에서 다운로드할 수 있습니다: https://drive.google.com/open?id=1th9gCrjOJOapZM3PAcmKhQ02acQve1RF
Fast2test는IBFCSM CEDP인증시험의 촉매제 같은 사이트입니다.IBFCSM CEDP인증시험 관연 덤프가 우리Fast2test에서 출시되었습니다. 여러분이IBFCSM CEDP인증시험으로 나 자신과 자기만의 뛰어난 지식 면을 증명하고 싶으시다면 우리 Fast2test의IBFCSM CEDP덤프자료가 많은 도움이 될 것입니다.
| Section | Objectives |
|---|---|
| Disaster Response and Recovery | - Recovery Management
|
| Risk and Safety Management | - Risk Assessment
|
| Emergency Management Principles | - Incident Management
|
Fast2test의IBFCSM인증 CEDP덤프는 인터넷에서 검색되는IBFCSM인증 CEDP시험공부자료중 가장 출중한 시험준비 자료입니다. IBFCSM인증 CEDP덤프를 공부하면 시험패스는 물론이고 IT지식을 더 많이 쌓을수 있어 일거량득입니다.자격증을 취득하여 자신있게 승진하여 연봉협상하세요.
질문 # 80
What should occur first when conducting a Hazard Vulnerability Analysis?
정답：A
설명：
The foundational first step in conducting aHazard Vulnerability Analysis (HVA), as outlined inFEMA's Comprehensive Preparedness Guide (CPG) 101and theTHIRAprocess, isHazard Identification, which involvesevaluating known hazards and risks posing threatsto the community or facility.4Before a planner can decide on a methodology (Option A) or consult specific experts (Option B), they must first understand the
"Universe of Hazards" that could potentially impact their jurisdiction.
This initial step involves researching historical data, geographic surveys, and industrial records to create a
"Master Hazard List." Hazards are typically categorized into three groups:
* Natural Hazards:Floods, hurricanes, earthquakes, and wildfires.
* Technological/Human-Caused Hazards:Chemical spills, power grid failures, and dam breaches.
* Adversarial/Threat-Based Hazards:Terrorist attacks, civil unrest, and cyber-attacks.
For theCEDPprofessional, this first step is critical because it dictates the entire scope of the emergency management program. If a hazard-such as a localized earthquake fault-is not "identified" and "evaluated" in the beginning, the resulting Emergency Operations Plan (EOP) will have a fundamental gap. Once the hazards are evaluated, the HVA process then moves to "Profiling" (determining frequency and magnitude) and "Vulnerability Assessment" (determining who and what is at risk). By starting with a comprehensive evaluation of known hazards, the organization ensures that its preparedness efforts are grounded in reality and that its limited mitigation resources are directed toward the threats that pose the greatest risk to life and property.
질문 # 81
What agency has responsibility for water and wastewater systems during an emergency?
정답：C
설명：
As established byHomeland Security Presidential Directive 7 (HSPD-7)and theNational Response Framework (NRF), theEnvironmental Protection Agency (EPA)is the designated Sector-Specific Agency (SSA) for theWater and Wastewater Systemssector. This sector is one of the 16 critical infrastructure sectors essential to the nation's security, economy, and public health.10During an emergency, the EPA's responsibility is to coordinate the protection and rapid restoration of these systems.
The EPA performs several critical roles during a disaster response:11
* Technical Assistance:Providing expertise on water treatment, contaminant identification, and infrastructure repair.12
* Laboratory Support:Utilizing the Environmental Response Laboratory Network (ERLN) to analyze water samples for chemical or biological agents.13
* Regulatory Oversight:Ensuring that emergency measures (like boil water advisories) follow the Safe Drinking Water Act (SDWA).
While theUSDA(Option B) provides support for water systems in rural communities (typically under 10,000 residents), the overall sector responsibility for the entire nation lies with the EPA. For aCEDPprofessional, the EPA is the primary federal partner forEmergency Support Function #10 (Oil and Hazardous Materials)and a key supporter forESF #3 (Public Works and Engineering). The EPA manages tools like theWater Health and Economic Analysis Tool (WHEAT)and theWaterISACto help water utilities assess risks and share threat information.14By leading this sector, the EPA ensures that one of the most vital "Community Lifelines"- potable water-is restored as quickly as possible, preventing secondary public health crises following a primary disaster.
질문 # 82
What terms best describe potential emergency preparedness related risks?
정답：B
설명：
In the standard scientific and regulatory definition of risk used byFEMA,ISO 31000, and theIBFCSM, risk is fundamentally expressed as a function ofLikelihood and Consequence. This is often simplified into the mathematical formula $Risk = Probability \times Impact$. "Likelihood" refers to the probability or frequency with which a specific hazard (e.g., a flood, earthquake, or cyber-attack) is expected to occur. "Consequence" (or Impact) refers to the severity of the result if that hazard does manifest, measured in terms of life safety, economic loss, environmental damage, and infrastructure failure.
While "Vulnerability" (Option C) and "Resilience" (Option B) are critical components of the riskequation, they are not the primary terms used to describe the risk itself. Vulnerability describes the characteristics of an asset that make it susceptible to a hazard, and Resilience describes the ability to recover. However, to prioritize emergency preparedness efforts, planners first plot hazards on aRisk Matrixusing likelihood and consequence. A high-likelihood, low-consequence event (like a localized power outage) might require different preparedness steps than a low-likelihood, high-consequence event (like a nuclear detonation).
According to theCEDPcurriculum, understanding these two terms allows for the objective ranking of threats.
This ranking is the core of theHazard Identification and Risk Assessment (HIRA)process. By quantifying the likelihood (e.g., a "100-year flood" has a 1% annual likelihood) and the consequence (e.g., $10 million in projected damage), emergency managers can justify the costs of mitigation and preparedness projects to stakeholders and government officials. It ensures that resources are directed toward the most significant
"Realized Risks"-those that are both plausible and potentially devastating.
질문 # 83
What transportation hazard class placard indicates flammable liquids?
정답：C
설명：
Under theDepartment of Transportation (DOT)hazardous materials regulations (49 CFR Part 172),Flammable Liquidsare designated asClass 3. A flammable liquid is defined as any liquid having a flash point of not more than 60°C (140°F), or any material in a liquid phase with a flash point at or above 37.8°C (100°F) that is intentionally heated and offered for transportation at or above its flash point in a bulk package. The Class 3 placard is identifiable by itsRed backgroundwith a white flame symbol at the top and the number "3" at the bottom.
The other classes mentioned are:
* Class 2 (Option A):Refers toGases, which are subdivided into 2.1 (Flammable Gas), 2.2 (Non- flammable Gas), and 2.3 (Poisonous Gas).
* Class 4 (Option C):Refers toFlammable Solids, including spontaneously combustible materials and dangerous-when-wet materials.
For aCertified Emergency and Disaster Professional (CEDP), the DOT Class 3 placard is a "High-Priority" indicator during a transportation accident. Whether on a tanker truck, a railcar, or a shipping container, the
"Red 3" placard signals an immediate risk of fire and potential explosion (BLEVE) if the container is exposed to heat. Responders use theEmergency Response Guidebook (ERG), specificallyGuide 128, to determine the initial isolation distance (typically 150 feet) and the appropriate firefighting foam for a Class 3 spill. This standardized classification system is the foundation of global hazardous materials transportation safety, ensuring that the "hazard communication" is clear and consistent across all modes of transport.1
질문 # 84
What alternative refers to the emergency management concept known as resource typing?
정답：B
설명：
Resource Typingis a central pillar of theNational Incident Management System (NIMS)that involves categorizing and describing resources-personnel, equipment, teams, and facilities-by theircapability.1The primary purpose of resource typing is to facilitateMutual aid response needs(Option A).2By using standardized definitions, an emergency manager in one state can request a "Type 1 Incident Management Team" or a "Type 3 Brush Truck" from another state and know exactly what level of capability they will receive.
Resource typing uses three main descriptors:
* Category:The broad function (e.g., Firefighting, Law Enforcement, Medical).
* Kind:The specific item or team (e.g., Ambulance, Helicopter, Search Dog).
* Type:The level of capability (Type 1 being the highest/most capable, Type 4 being the least).
Without resource typing, mutual aid is inefficient. For example, if a jurisdiction requests "pumps" for a flood, they might receive small basement pumps when they actually needed high-volume industrial pumps. By
"typing" the resource, the request is precise (e.g., "We need two Type 1 High-Volume Pumps"). This ensures that the "right tool" is sent to the "right job," which is critical when resources are scarce and time is of the essence.
For aCEDPprofessional, resource typing is essential forGap Analysis. During the preparedness phase, a manager "types" their existing inventory. If the analysis shows they only have Type 3 capabilities for a hazard that requires Type 1, they know they have a gap that must be filled through training, procurement, or a mutual aid agreement. This standardized language allows for the "interoperability" of resources across the entire country, ensuring that theEmergency Management Assistance Compact (EMAC)can function seamlessly by matching the requesting state's needs with the assisting state's typed assets.
질문 # 85
......
Fast2test의 도움을 받겠다고 하면 우리는 무조건 최선을 다하여 한번에 패스하도록 도와드릴 것입니다. 또한 일년무료 업뎃서비스를 제공합니다. 중요한 건 덤프가 갱신이 되면 또 갱신버전도 여러분 메일로 보내드립니다. 망설이지 마십시오. 우리를 선택하는 동시에 여러분은CEDP시험고민을 하시지 않으셔도 됩니다.빨리 우리덤프를 장바구니에 넣으시죠.
CEDP최고품질 덤프데모 다운로드: https://kr.fast2test.com/CEDP-premium-file.html
참고: Fast2test에서 Google Drive로 공유하는 무료, 최신 CEDP 시험 문제집이 있습니다: https://drive.google.com/open?id=1th9gCrjOJOapZM3PAcmKhQ02acQve1RF