2026 Latest Pass4guide JN0-352 PDF Dumps and JN0-352 Exam Engine Free Share: https://drive.google.com/open?id=1oAcOMunnXAl80L2Ybk4Ywlykp4WUfNEo
The design of our JN0-352 guide training is ingenious and delicate. Every detail is perfect. For example, if you choose to study our learning materials on our windows software, you will find the interface our learning materials are concise and beautiful, so it can allow you to study JN0-352 exam questions in a concise and undisturbed environment. In addition, you will find a lot of small buttons, which can give you a lot of help. Some buttons are used to hide or show the answer. What's more important is that we have spare space, so you can take notes under each question in the process of learning JN0-352 Study Tool. When you start, there will be a timer to help you to time, so that you can finish the problem within the prescribed time and it can create an environment. If you are satisfied with our JN0-352 exam questions, you can make a choice to purchase them.
| Section | Weight | Objectives |
|---|---|---|
| Layer 2 Security | 10-15% | - Layer 2 firewall filters and security features - DHCP snooping, Dynamic ARP Inspection and IP Source Guard - Port security, MAC limiting and storm control |
| IS-IS | 10-15% | - Adjacency establishment, levels and metrics - Configuration and route exchange - Scalable enterprise deployment and troubleshooting |
| Layer 2 Switching and VLANs | 15-20% | - Spanning Tree Protocol (STP, RSTP, MSTP) operation and configuration - VLAN concepts, configuration, trunking and tagging - Link Aggregation Groups (LAG) and Virtual Chassis |
| OSPF | 15-20% | - Neighbor formation, area design and LSA types - Configuration, verification and troubleshooting - Route summarization and redistribution |
| Tunnels and Overlays | 5-10% | - Tunnel types, encapsulation and operation - GRE, IP-IP and dynamic tunnel configuration - Overlay network design and connectivity |
| BGP | 15-20% | - Routing policies, filtering and common troubleshooting - Neighbor relationships and session establishment - Route advertisement, attributes and path selection |
| High Availability and Resiliency | 5-10% | - Redundancy protocols and failover mechanisms - Network resiliency design and troubleshooting - Graceful restart and non-stop routing |
| IP Multicast | 5-10% | - IGMP operation and configuration - PIM Dense Mode, Sparse Mode and RP mechanisms - Multicast routing monitoring and troubleshooting |
| Protocol Independent Routing | 10-15% | - Routing instances and route selection criteria - Basic routing policy and filter operation - Routing tables, static routes and route preference |
A Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-352) practice questions is a helpful, proven strategy to crack the Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-352) exam successfully. It helps candidates to know their weaknesses and overall performance. Pass4guide software has hundreds of Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-352) exam dumps that are useful to practice in real-time. The Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-352) practice questions have a close resemblance with the actual JN0-352 exam.
NEW QUESTION # 195
What is the purpose of the native VLAN feature on the Juniper Networks EX Series Switches?
Answer: B
Explanation:
A native VLAN is a trunk-port concept, not an access-port concept. On an 802.1Q trunk, every frame is normally expected to carry a VLAN tag identifying its membership; the native VLAN is the single exception that Junos permits an administrator to define using the native-vlan-id statement under the trunk interface's family ethernet-switching hierarchy. Any untagged frame arriving on that trunk port is automatically classified into the configured native VLAN, and conversely, outbound frames belonging to the native VLAN are transmitted untagged rather than with an 802.1Q header. This behavior exists chiefly for interoperability with legacy or third-party devices that either cannot generate 802.1Q tags or intentionally send management or default traffic untagged across an otherwise tagged trunk. Access ports, by definition, only ever carry a single VLAN's traffic and never receive tagged frames in normal operation, so the native VLAN mechanism has no relevance there -- which eliminates the access-port-oriented answer choices.
The native VLAN also does not restrict a trunk to a single VLAN; the trunk continues to carry all configured tagged VLANs simultaneously, with the native VLAN simply being the designated untagged exception. Misconfiguring or mismatching native VLAN IDs between two trunk peers is a classic Layer 2 troubleshooting scenario on the exam.
NEW QUESTION # 196
Refer to Exhibit:
R1 is not responding to ICMP requests sent to the VIP address.
Referring to the exhibit, which command option would you configure on the virtual address to correct this problem?
Answer: A
Explanation:
In this configuration, R1's physical interface address (10.10.10.1) is different from the VRRP virtual IP address (10.100.100.1), meaning R1 is operating as a non-owner VRRP master -- it did not originate the virtual address as one of its own real interface addresses. By default, Junos VRRP masters that do not own the virtual address will forward transit traffic destined through that address but will not process or respond to traffic addressed directly to the VIP itself, such as ICMP echo requests, Telnet, or SSH sessions aimed at 10.100.100.1. This is deliberate default behavior intended to prevent ambiguity about which physical device is answering on behalf of a shared virtual identity. To allow the master to accept and respond to packets whose destination is the virtual address itself, the accept-data statement must be explicitly configured under the vrrp- group hierarchy. Once enabled, the elected master will process locally destined traffic sent to the VIP, resolving exactly the symptom described. The track option is used for interface or route- based priority adjustment to influence mastership, advertise-interval tunes the frequency of VRRP hello advertisements, and no-preempt prevents a higher-priority router from reclaiming mastership once a lower-priority router has taken over -- none of these affect whether the master processes traffic destined to the VIP.
NEW QUESTION # 197
Which command solves the error that you see in the exhibit?
Answer: C
Explanation:
The error in the exhibit occurs because an access interface can only be a member of one VLAN, but it is currently configured with the "default" VLAN and is trying to be added to VLAN "v11." To resolve the issue, the correct command is:
delete ge-0/0/2 unit 0 family ethernet-switching vlan members default
This command removes the interface from the "default" VLAN, allowing it to be part of VLAN
"v11" as intended.
NEW QUESTION # 198
What does the * indicate in the output shown in the exhibit?
Answer: C
Explanation:
The exhibit shows the output of the command show vlans brief, which displays brief information about VLANs and their associated interfaces.
The output has four columns: Routing instance, VLAN name, Interfaces, and Tagging. The * symbol indicates that the interface is active, meaning that it is up and forwarding traffic. This can be verified by the command show interfaces terse, which displays the status of the interfaces.
NEW QUESTION # 199
Click the Exhibit button. You have two routers on your network that are not able to establish BGP sessions. Which two statements are correct in this scenario? (Choose two.)
Answer: A,C
Explanation:
The diagnostic output explicitly states the root cause: the local router has only the inet6-unicast address family configured for this peer, while the remote router advertised inet-unicast and inet- vpn-unicast in its OPEN message, and BGP requires at least one common negotiated address family (NLRI type) between two peers for a session to remain established; with zero overlap between the two sides' configured families, the session is torn down immediately after the OPEN exchange, which is precisely why the peer state shows Active rather than Established. This confirms the mismatched- address-family statement directly and unambiguously from the exhibit's own Down reason and Detail reason fields. The diagnostic tool's own embedded Suggestion text goes further, explicitly advising the administrator to additionally verify that the local-address configured for the peer matches the remote router's configured neighbor address and vice versa -
- a secondary, commonly encountered condition in which mismatched or effectively duplicated/incorrect address bindings between the two sides' neighbor statements can independently prevent a session from completing correctly, even once the family mismatch is resolved. This is why address-configuration consistency between the peers is flagged as a second concern worth checking in this scenario. Nothing in the exhibit references NTP or time synchronization at all, nor does anything in the output reference authentication, an MD5 mismatch, or any related failure signature; both of those conditions would present through entirely different diagnostic messages than the one shown here.
NEW QUESTION # 200
......
Download Juniper JN0-352 Real Exam Dumps Today. Today is the right time to learn new and in demands skills. You can do this easily, just get registered in Juniper JN0-352 certification exam and start preparation with Juniper JN0-352 exam dumps. The Enterprise Routing and Switching, Specialist (JNCIS-ENT) JN0-352 PDF Questions and practice test are ready for download. Just pay the affordable JN0-352 authentic dumps charges and click on the download button. Get the Enterprise Routing and Switching, Specialist (JNCIS-ENT) JN0-352 latest dumps and start preparing today.
JN0-352 VCE Exam Simulator: https://www.pass4guide.com/JN0-352-exam-guide-torrent.html
What's more, part of that Pass4guide JN0-352 dumps now are free: https://drive.google.com/open?id=1oAcOMunnXAl80L2Ybk4Ywlykp4WUfNEo