If you want to be a more successful person and become the best, the first step you need to take is to have our FCSS_SDW_AR-7.6 exam questions. Get an internationally certified FCSS_SDW_AR-7.6 certificate to prove your strength. This is the best way. Your strength and efficiency will really bring you more job opportunities. And our FCSS_SDW_AR-7.6 study braindumps will help you pass the exam easily and get the certification for sure.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
>> Valid FCSS_SDW_AR-7.6 Real Test <<
Our experts have devised a set of exam like FCSS_SDW_AR-7.6 practice tests for the candidates who want to ensure the highest percentage in real exam. Doing them make sure your grasp on the syllabus content that not only imparts confidence to you but also develops your time management skills for solving the test comprise given time lim. FCSS_SDW_AR-7.6 Practice Tests comprise a real exam like scenario and are amply fruitful to make sure a memorable success in FCSS_SDW_AR-7.6 exam.
NEW QUESTION # 48
You have configured the performance SLA with the probe mode as Prefer Passive.
What are two observable impacts of this configuration? (Choose two.)
Answer: D,E
Explanation:
When "Prefer Passive" is set, FortiGate attempts to passively monitor the health of SD-WAN members using real application traffic like TCP sessions, collecting statistics such as latency, jitter, and packet loss from actual observed flows.
Passive monitoring does not generate probe packets; it relies entirely on existing traffic. If there is no matching traffic, health check data is unavailable, meaning dead members may go undetected when only passive monitoring is active.
NEW QUESTION # 49
You have a FortiGate configuration with three user-defined SD-WAN zones and two members in each of these zones. One SD-WAN member is no longer in use in health-check and SD-WAN rules. You want to delete it.
What happens if you delete the SD-WAN member from the FortiGate GUI?
Answer: D
Explanation:
In FortiOS, you can remove an SD-WAN member from the GUI as long as it is not in use in any health-checks, SD-WAN rules, or policies.
When you delete it, FortiGate will automatically clean up related routes (static or dynamic SD- WAN routes referencing that member).
NEW QUESTION # 50
Refer to the exhibit.
You configure SD-WAN on a standalone FortiGate device. You want to create an SD-WAN rule that steers Facebook and Linkedin traffic through the less costly internet link. The FortiGate GUI page appears as shown in the exhibit.
What should you do to set Facebook and LinkedIn as destinations?
Answer: B
Explanation:
In an SD-WAN rule, you can steer application traffic by using Internet Service Database (ISDB) entries. Facebook and LinkedIn are predefined ISDB objects in FortiGate, so the correct way is to select them in the Internet service field under Destination. This ensures that all traffic to these applications is matched and routed through the chosen (less costly) link.
NEW QUESTION # 51
Refer to the exhibit. The administrator configured the IPsec tunnel VPN1 on a FortiGate device with the parameters shown in exhibit.
Based on the configuration, which three conclusions can you draw about the characteristics and requirements of the VPN tunnel? (Choose three.)
Answer: C,D,E
Explanation:
The administrator must manually assign the tunnel interface IP address on the hub side The setting "set exchange-interface-ip enable" means the tunnel interface IP address is exchanged, but the hub side IP must be set manually.
The remote end must support IKEv2
The command "set ike-version 2" explicitly configures IKE version 2 for this tunnel, so the remote device must support IKEv2.
This configuration allows user-defined overlay IP addresses
The tunnel interface enables user control over IP addressing for the overlay network, allowing custom IP assignments.
NEW QUESTION # 52
(You plan a large SD-WAN deployment for a global company. You want to divide the network architecture into five geographical regions and install two hubs in each region for increased redundancy. You expect a significant amount of traffic within each region and limited traffic flow between spokes in different regions. You plan to connect the small branch sites to only the closest hub in their regions and the large branch sites to the two hubs in the regions.
Which statement about your plan is true? Choose one answer.)
Answer: A
Explanation:
The described design is a multi-region SD-WAN architecture, where:
Each region has its own dual-hub ADVPN domain
Most traffic is intra-region
Inter-region traffic is limited and controlled
Spokes can be single-hub or dual-hub, depending on size and redundancy requirements According to Fortinet's SD-WAN Architecture for Enterprise guidance, when deploying multiple ADVPN regions, eBGP is the recommended routing protocol between regions. Each region operates as an independent routing domain (typically iBGP within the region), while eBGP is used to exchange routes between regional hubs. This approach:
Prevents excessive route reflection and scaling issues
Provides clear administrative boundaries between regions
Improves stability and scalability in large global deployments
Matches the exact traffic pattern described (high intra-region, low inter-region traffic) This is explicitly documented in Fortinet guidance for "Using eBGP between regions with intra-region ADVPN", which confirms that the architecture described in the question is valid and recommended when eBGP is used between regions.
Why the other options are incorrect:
Option B is incorrect because FortiOS does not impose a hard "four-hub" architectural limit in the described regional model. Each region has its own hubs, not a single flat multihub domain.
Option C is incomplete. While FortiManager Overlay Orchestrator can help operationally, it is not the key architectural requirement that makes this design valid. The question asks what makes the plan correct from a design standpoint, not a tooling standpoint.
Option D is incorrect because FortiOS fully supports mixed spoke connectivity within the same region (some spokes single-hub, others dual-hub), which is a common enterprise SD-WAN design.
Therefore, the correct and documented conclusion is that the plan is possible and eBGP should be used as the routing protocol between regions, which corresponds to Answer A.
NEW QUESTION # 53
......
You will receive a registration code and download instructions via email. We will be happy to assist you with any questions regarding our products. Our FCSS - SD-WAN 7.6 Architect (FCSS_SDW_AR-7.6) practice exam software helps to prepare applicants to practice time management, problem-solving, and all other tasks on the standardized exam and lets them check their scores. The FCSS - SD-WAN 7.6 Architect (FCSS_SDW_AR-7.6) practice test results help students to evaluate their performance and determine their readiness without difficulty.
FCSS_SDW_AR-7.6 Examcollection: https://www.validdumps.top/FCSS_SDW_AR-7.6-exam-torrent.html