P.S.PassTestがGoogle Driveで共有している無料の2026 International Code Council Fire-Inspector-IIダンプ：https://drive.google.com/open?id=1CeUizbT_p9UMslnG_bYn66-p2rkgO-WA
IT業種で仕事している皆さんが現在最も受験したい認定試験はInternational Code Councilの認定試験のようですね。広く認証されている認証試験として、International Code Councilの試験はますます人気があるようになっています。その中で、Fire-Inspector-II認定試験が最も重要な一つです。この試験の認定資格はあなたが高い技能を身につけていることも証明できます。しかし、試験の大切さと同じ、この試験も非常に難しいです。試験に合格するのは少し大変ですが、心配しないでくださいよ。PassTestはFire-Inspector-II認定試験に合格することを助けてあげますから。
| Section | Weight | Objectives |
|---|---|---|
| General Fire Safety Provisions | 18% | - Code application and scope - General requirements for safety - Definitions and terminology |
| General Inspection Administration | 20% | - Communication
|
| Means of Egress | 15% | - Emergency escape and rescue - Capacity and arrangement - Egress components |
| Occupancy Classifications and Requirements | 22% | - Classification of occupancies - Specific requirements by occupancy type
|
| Fire Protection Systems | 15% | - Standpipes and hydrants - Fire alarm and detection systems - Portable fire extinguishers - Sprinkler systems |
| Regulated Materials and Processes | 10% | - Special processes and operations - Hazardous materials - High-piled storage |
>> Fire-Inspector-II試験問題解説集 <<
私たちInternational Code CouncilのFire-Inspector-II学習クイズは、仕上げの体系的な分析の分野での近年の試験状況のさまざまな専門家から作られ、学生の要求をできるだけ満たし、同時にチェックとレビューを行う専門スタッフがいますFire-Inspector-II実践教材、学生の学習に高品質の情報を楽しんでもらいました。 試験の多様性により、PassTestのFire-Inspector-II学習教材もさまざまな種類の学習教材にまとめられているため、学生は必要なFire-Inspector-IIガイド急流の情報をすばやく見つけることができます。
質問 # 13
Given: Scheduling inspections should be done to obtain a high level of efficiency. When scheduling inspections at multiple occupancies on the same day, the inspector should:
正解：D
解説：
Efficient scheduling minimizes travel time and maximizes inspection coverage, a practical aspect of fire inspection management (not explicitly detailed in the IFC but implied in Section 106.2, Inspections).
Selecting occupancies in the same geographic area (C) reduces travel, allowing more time for thorough inspections. Option A undermines the comprehensive nature of inspections required by IFC Section 106.1.
Option B could compromise inspection quality, not efficiency. Option D focuses on violation history, which doesn't inherently improve scheduling efficiency and may skew priorities. Thus, C is the most logical and IFC-aligned choice.
Reference: IFC 2021, Section 106.2 (Inspections).
質問 # 14
At each grinding, buffing, or wire brushing operation on magnesium, other than the rough finishing of casting, dust must be collected by means of suitable hoods or enclosures connected to a:
正解：D
解説：
Reference to Magnesium Dust Collection Requirements:
NFPA 484 (Standard for Combustible Metals), Section 9.3.2, requires that magnesium dust from grinding, buffing, or wire brushing must be collected using a liquid precipitation-type separator.
The International Fire Code (IFC 2021), Section 2205, also references proper dust collection for combustible metals like magnesium.
Why Use a Liquid Precipitation-Type Separator?
Magnesium dust is highly combustible and reacts violently with air and moisture.
A liquid precipitation-type separator prevents dust accumulation and ignition by using a liquid medium to safely capture and neutralize metal dust particles.
Other collection methods can generate static electricity or allow dangerous dust accumulation, increasing fire and explosion risks.
Clarification of Incorrect Answer Choices:
A: Cloth screen arrestor # Incorrect
Not effective for combustible metal dust, as magnesium dust can ignite easily and pass through fabric filters.
B: Low-pressure cyclone # Incorrect
Cyclones are used for larger particulate matter, but not suitable for fine magnesium dust due to fire and explosion hazards.
C: Dry-type dynamic precipitator # Incorrect
Dry-type systems can accumulate magnesium dust, creating an explosion hazard.
Conclusion:
The correct and verified answer is D (liquid precipitation type of separator) based on NFPA 484 Section 9.3.2 and IFC 2205, ensuring safe collection of magnesium dust during grinding, buffing, or wire brushing operations.
質問 # 15
A Type I handrail that is not circular shall have a minimum perimeter dimension of ___ inches.
正解：B
解説：
According to the 2021 International Fire Code (IFC) and the International Building Code (IBC) Section
1014.3, handrails are categorized into Type I and Type II based on their shape and size requirements.
Type I handrails refer to those that are not circular in shape but still comply with graspability requirements.
IBC Section 1014.3.1 states that:
If a handrail is not circular, it must have a perimeter dimension between 4 inches (minimum) and 6.25 inches (maximum).
The cross-section of such a handrail should provide an adequate grasping surface.
# Correct answer: D. 6.25 inches
質問 # 16
The occupant load of a building, or portion thereof, may be increased beyond the code's calculated minimum for the Group classification of the building, provided that all other requirements of the code are also met based on the modified number, and the occupant load does not exceed one occupant per ___ sq. ft.
正解：D
解説：
Reference to Occupant Load Calculation:
The International Fire Code (IFC 2021), Section 1004.2 states that the calculated occupant load of a building may be increased if all other life safety provisions are met.
However, the occupant load cannot exceed one person per 5 square feet when increased beyond the standard calculations.
Fire Safety Considerations for Increased Occupant Load:
Increasing the occupant load requires ensuring:
Egress capacity (number and width of exits) meets the increased load.
Fire protection systems (sprinklers, alarms, etc.) are adequate for the new load.
Proper ventilation and sanitation facilities are maintained.
IFC 1004.2 and NFPA 101 both enforce the maximum limit of 1 occupant per 5 square feet in modified occupant load scenarios.
Clarification of Incorrect Answer Choices:
A: 3 sq. ft. # Incorrect
Too small for safe egress and occupant movement; the code does not allow such high density in general occupancies.
C: 7 sq. ft. # Incorrect
While some occupancies have higher space-per-occupant allowances, 5 sq. ft. is the maximum density permitted when increasing load.
D: 15 sq. ft. # Incorrect
15 sq. ft. per person is for lower-density assembly and business occupancies, not for maximum occupant load increases.
Conclusion:
The correct and verified answer is B (5 sq. ft. per occupant) as per IFC 1004.2 and NFPA 101, which govern occupant load increases in buildings.
質問 # 17
Existing elevators in a four-story office building which are intended for use by emergency personnel for fire- fighting or rescue purposes must comply with which of the following standards?
正解：C
解説：
Reference to Elevator Safety and Firefighter Use:
ASME A17.1 (Safety Code for Elevators and Escalators) establishes the safety requirements for elevators, including those designated for firefighter and emergency personnel use.
The International Fire Code (IFC) and NFPA 101 (Life Safety Code) both reference ASME A17.1 when addressing elevator safety and firefighter access.
Firefighter Access and Operation Requirements:
ASME A17.1, Section 2.27 covers Firefighter Emergency Operations (FEO), which includes:
Phase I Operation (Automatic recall of elevators to a designated floor upon activation of fire alarms).
Phase II Operation (Manual override by firefighters for rescue and suppression operations).
IFC 607.1 (2021 Edition) mandates that fire service access elevators comply with ASME A17.1 for firefighter use in high-rise and multi-story buildings.
Clarification of Incorrect Answer Choices:
A: UL 803 # Incorrect
UL 803 is not related to elevator fire safety; it pertains to electrical control panels for industrial applications.
B: NFPA 70 (National Electrical Code) # Incorrect
While NFPA 70 covers electrical wiring and circuits, it does not specifically regulate elevator emergency operations.
D: ASME A17.3 # Incorrect
ASME A17.3 is the Safety Code for Existing Elevators and Escalators, which applies to retrofits and upgrades, but ASME A17.1 is the primary code for operational and emergency use elevators.
Conclusion:
The correct and verified answer is C (ASME A17.1) because it specifically outlines the requirements for firefighter and emergency personnel elevator use, ensuring compliance with the IFC and NFPA codes.
質問 # 18
......
PassTest有効なFire-Inspector-II研究急流がなければ、International Code Councilあなたの利益はあなたの努力に比例しないといつも感じていますか？ あなたは常に先延ばしに苦しみ、散発的な時間を十分に活用できないと感じていますか？ 答えが完全に「はい」の場合は、高品質で効率的なテストツールであるFire-Inspector-IIトレーニング資料を試してみることをお勧めします。 Fire-Inspector-II試験に合格し、夢のあるFire-Inspector-IIの67 - Fire Inspector II Exam認定を取得することで、あなたの成功は100％保証され、より高い収入やより良い企業により多くの機会を得ることができます。
Fire-Inspector-II更新版: https://www.passtest.jp/International-Code-Council/Fire-Inspector-II-shiken.html
2026年PassTestの最新Fire-Inspector-II PDFダンプおよびFire-Inspector-II試験エンジンの無料共有：https://drive.google.com/open?id=1CeUizbT_p9UMslnG_bYn66-p2rkgO-WA