2026年PassTestの最新EDGE-Expert PDFダンプおよびEDGE-Expert試験エンジンの無料共有：https://drive.google.com/open?id=1Lx6WgDD2OJYRjUw-8xjX1JKvo1-rFs4d
PassTestのIT認証試験問題集は長年のトレーニング経験を持っています。PassTest EDGEのEDGE-Expert試験トレーニング資料は信頼できる製品です。当社のスタッフ は受験生の皆様が試験で高い点数を取ることを保証できるように、巨大な努力をして皆様に最新版のEDGE-Expert試験トレーニング資料を提供しています。PassTest EDGEのEDGE-Expert試験材料は最も実用的なIT認定材料を提供することを確認することができます。
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Energy Efficiency | 25% | - Energy baseline calculation
|
| Topic 2: Materials & Embodied Carbon | 15% | - Embodied energy baseline
|
| Topic 3: Water Efficiency | 20% | - Water conservation measures
|
| Topic 4: EDGE Fundamentals & Framework | 20% | - Certification levels and criteria
|
| Topic 5: EDGE Software & Application | 10% | - Using EDGE calculation tool
|
| Topic 6: Certification Process & Roles | 10% | - Steps to certification
|
PassTestは、最新のテクノロジーに遅れずについていき、コンテンツだけでなくディスプレイでも試験の質問と回答にそれらを適用しようとしています。それが、私たちの合格率が98％から100％と高い理由です。データはユニークで、このキャリアに特有です。 EDGE-Expert勉強のトレントを使用すると、レジャーの学習体験を楽しむことができ、EDGE-Expert試験に合格すると確実に合格します。 EDGE-Expert準備資料の内容については、専門家によって簡素化され、ディスプレイは効果的に設計されています。試して楽しんでください！
質問 # 99
Which of the following properties of glass are used in EDGE?
正解：D
解説：
In the CBCI EDGE curriculum, glazing performance is characterized using properties that directly influence solar heat gains through windows, because this is a major driver of cooling energy demand in many climates.
The EDGE software uses Solar Heat Gain Coefficient, which represents the fraction of incident solar radiation that enters the building as heat through the glazing system. A lower SHGC reduces solar heat entering the indoor space, lowering cooling loads and improving the project's energy savings in the improved case.
Shading Coefficient is an older metric that is sometimes referenced in market literature, but EDGE standardizes the glazing solar performance input using SHGC for consistency across regions and products.
Solar Heat Loss Coefficient is not a standard glazing metric used in EDGE; heat loss through glazing is addressed using thermal transmittance measures such as U-value rather than an SHLC parameter. Solar Reflectivity may be relevant for certain roof or surface materials, but it is not the primary glazing property used in EDGE to quantify solar heat admitted indoors. Therefore, the correct glass property used in EDGE among the options provided is SHGC.
質問 # 100
Company A is developing a logistic center of 15,000 m² in Kenya. The project consists of 14,000 m² of warehouse space, 500 m² of office space, and 500 m² of technical areas mechanical and electrical. The company is looking for a single certification for the project. Which EDGE Building type should be selected for the certification?
正解：B
解説：
In the CBCI EDGE curriculum, the correct building type in the EDGE software is selected based on the project's dominant functional use, because the baseline assumptions for energy and water are driven by occupancy patterns, internal loads, operating hours, and typical system types for that use. In this project, the overwhelming majority of area is warehouse space: 14,000 m² out of 15,000 m², while office and technical areas together represent only 1,000 m².
EDGE does not treat "Logistic" as a separate building type for modeling; logistics centers are typically modeled under the Industrial category because warehouses and distribution facilities have industrial-like operational characteristics and baselines. Selecting Office would misrepresent schedules and plug loads and would distort the baseline comparison, leading to inaccurate savings results. Retail is also inappropriate because it assumes customer-facing operating hours, lighting levels, and HVAC patterns different from warehouses.
For a single certification covering the whole development, the appropriate approach is to select the building type that best matches the primary use and area share. Therefore, the correct EDGE building type for this logistics center is Industrial.
質問 # 101
Water consumption savings, resulting from greywater recovery, are based on which of the following?
正解：C
解説：
Greywater recovery in EDGE is a water efficiency measure, and the software calculates savings by comparing water consumption before and after implementing the measure. The EDGE Methodology Report explains the calculation method: "Water consumption savings from greywater recovery are calculated as the difference between the Base Case water consumption and the Improved Case water consumption after applying the measure. The Base Case represents the typical water use without any efficiency measures, serving as the benchmark for all savings calculations" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). Option A, Base Case water consumption, is the correct reference point for determining savings, as it establishes the baseline against which the greywater recovery measure is evaluated. Option B (Improved Case water consumption) is the result after applying the measure, not the basis for savings. Option C (cost of water consumption at local tariff) and Option D (incremental cost of installation and cost of water consumption at local tariff) relate to financial outputs, not the direct calculation of water savings, as clarified:
"Water savings in EDGE are quantified in volume (liters or cubic meters), not cost, though cost savings are derived later using local tariffs" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Thus, greywater recovery savings are based on Base Case water consumption (Option A).
Reference:EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations; EDGE User Guide Version 2.1, Section 5.2: Water Efficiency Measures.
質問 # 102
Which of the following is an EDGE measure to reduce the embodied energy in materials?
正解：C
解説：
Embodied energy in materials is one of the three core pillars of the EDGE standard, focusing on reducing the environmental impact of construction materials. The EDGE User Guide lists measures that specifically target embodied energy: "To reduce embodied energy in materials, EDGE includes measures such as the use of fly ash concrete, which substitutes a portion of cement with fly ash, a byproduct of coal combustion, thereby lowering the embodied energy and carbon footprint of concrete production" (EDGE User Guide, Section 7.2:
Materials Efficiency Measures). Option B, fly ash concrete, directly aligns with this measure, as it reduces the need for high-energy cement production. Option A (external shading) impacts energy by reducing cooling loads but does not directly address embodied energy: "External shading reduces operational energy use but does not contribute to embodied energy savings unless the shading materials themselves are low-impact, which is not specified in EDGE" (EDGE User Guide, Section 3.5: Passive Design Strategies). Option C (occupancy sensors) is an energy efficiency measure for lighting, not materials: "Occupancy sensors reduce lighting energy use but have no direct impact on embodied energy in materials" (EDGE User Guide, Section
4.4: Lighting Efficiency Measures). Option D (low-flow shower heads) targets water efficiency, not materials:
"Low-flow shower heads reduce water consumption, but their embodied energy impact is minimal and not a focus of EDGE materials measures" (EDGE User Guide, Section 5.2: Water Efficiency Measures). The EDGE MethodologyReport further elaborates: "Fly ash concrete can reduce embodied energy by up to 20% compared to traditional concrete, making it a key measure in EDGE for materials efficiency, especially in high-volume applications like hospitals or hotels" (EDGE Methodology Report Version 2.0, Section 6.1:
Embodied Energy in Materials). Other materials measures in EDGE, such as using recycled steel or bamboo, are not listed among the options, making fly ash concrete (Option B) the correct choice for reducing embodied energy.
Reference:EDGE User Guide Version 2.1, Section 7.2: Materials Efficiency Measures, Section 3.5: Passive Design Strategies, Section 4.4: Lighting Efficiency Measures, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials.
質問 # 103
During a design audit, an EDGE Auditor notices that the project does not meet the EDGE standard for energy.
Which of the following is an acceptable course of action for the Auditor?
正解：D
解説：
The role of an EDGE Auditor during a design audit (Preliminary Certification stage) is to verify compliance with the EDGE standard, which requires at least 20% savings in energy, water, and embodied energy in materials. If the project does not meet the standard, the Auditor must follow specific protocols without overstepping their role. The EDGE Expert and Auditor Protocols outline the acceptable actions: "If a project does not meet the EDGE standard for energy during a design audit, the Auditor should inform the Client of the shortfall and ask them to use the EDGE tool again to identify additional measures that will take the project comfortably over the EDGE standard (e.g., 20% energy savings). The Auditor must not provide design advice or modify the assessment themselves, as their role is to verify, not consult" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option A, ask the Client to use the EDGE tool again to identify options that will take the project comfortably over the EDGE standard, directly aligns with this guidance, as it keeps the Auditor in a verification role while encouraging the Client to revise their design. Option B (contact the design team directly to work with them) is incorrect, as it violates the Auditor's independence: "The Auditor must not engage directly with the design team to improve the project, as this constitutes consultancy, which conflicts with their role as an independent verifier" (EDGE Expert and Auditor Protocols, Section 2.3:
Conflict of Interest). Option C (take no further action) is also incorrect, as the Auditor has a responsibility to report the shortfall: "If a project does not meet the EDGE standard, the Auditor must document the failure in the audit report and inform the Client, rather than abandoning the process" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (provide a list of measures based on the Auditor's experience) oversteps the Auditor's role by offering consultancy: "The Auditor cannot provide specific design recommendations or measures, as this compromises their impartiality; they must direct the Client to use the EDGE software or consult an EDGE Expert" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). The EDGE User Guide further supports: "During a design audit, the Auditor's role is to assess compliance, not to guide the design process; if the project falls short, the Client should revisit the EDGE tool to explore additional measures, potentially with the help of an EDGE Expert" (EDGE User Guide, Section
6.5: Working with EDGE Auditors). The EDGE Certification Protocol adds: "The Auditor's report should note the energy shortfall and recommend that the Client revise the self-assessment to meet the 20% savings threshold, ensuring the process remains Client-driven" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Thus, asking the Client to use the EDGE tool again (Option A) is the acceptable course of action.
Reference:EDGE Expert and Auditor Protocols, Section 4.1: Audit Process, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.5:
Working with EDGE Auditors.
質問 # 104
......
21世紀は情報の世紀です。 そのため、EDGEのEDGE-Expert試験問題のフィールドには多くの変更があります。 彼らはまた、人々の生活と人間社会の運営方法を大きく変えています。 EDGE-Expert試験の準備をしている場合、弊社PassTestはこのWebサイトで最高の電子EDGE-Expert試験トレントを提供できます。 私たちのEDGE-ExpertのExcellence in Design for Greater Efficiencies (EDGE Expert) Examテストトレントの指導の下で、あなたはトラブルを回避し、すべてをあなたの歩みに乗せることができると強く信じています。
EDGE-Expert最新試験情報: https://www.passtest.jp/EDGE/EDGE-Expert-shiken.html
P.S.PassTestがGoogle Driveで共有している無料の2026 EDGE EDGE-Expertダンプ：https://drive.google.com/open?id=1Lx6WgDD2OJYRjUw-8xjX1JKvo1-rFs4d