P.S.PassTestがGoogle Driveで共有している無料の2026 EDGE EDGE-Expertダンプ：https://drive.google.com/open?id=1GceMmYmwirUOUjAdQx9NP_p9LENCGy4A
弊社はEDGE-Expert問題集の英語版と日本語版をリリースしています。英語版と日本語版の内容は同じですけど、言語だけ違いがあります。それなので、EDGE-Expertに関する英語試験や日本語試験に参加する予定があるご客様は安心に問題集を購入できます。EDGE-Expert試験のために、気楽に準備したり、参加したりしています。その他、我々のEDGE-Expert日本語問題集を購入すると、英語版を送ります。
| Section | Objectives |
|---|---|
| Resource Efficiency Metrics | - Energy efficiency concepts and savings calculation - Water efficiency strategies and benchmarks - Materials efficiency and embodied energy basics |
| Certification Process | - Project registration and documentation requirements - Verification and audit process |
| EDGE Software Application | - Interpreting performance results and compliance - Project modeling and inputs in EDGE software |
| EDGE Green Building Fundamentals | - Sustainable design principles - Overview of EDGE system and certification framework |
EDGE-Expert試験にすばやく合格できるようにする必要があるため、信頼できる製品を選択する必要があります。 EDGE-Expert試験の教材は当局によって認定されており、ユーザーによってテストされています。これは間違いなく自信を持って使用できる製品です。もちろん、私たちのデータはあなたをもっと安心させるかもしれません。 EDGE-Expert準備準備の合格率は99％に達しました。これは非常に信じられない価値ですが、私たちはそれを行いました。製品について詳しく知りたい場合は、スタッフに相談するか、EDGE-Expert練習エンジンの無料試用版をダウンロードしてください。ご参加をお待ちしております。
質問 # 49
What is the application process for an architect with more than three years of professional experience to become an EDGE Auditor?
正解：B
解説：
According to the CBCI EDGE framework, the pathway to becoming an EDGE Auditor is structured to ensure technical competence and familiarity with the EDGE methodology before assuming third-party verification responsibilities. An architect with more than three years of professional experience satisfies the general professional experience requirement; however, this alone is not sufficient to directly become an EDGE Auditor.
The curriculum clarifies that the candidate must first qualify and be recognized as an EDGE Expert. This step ensures that the individual has demonstrated proficiency in using the EDGE software, understands baseline and improved case calculations, and is fully familiar with energy, water, and materials measures within the EDGE Standard. The EDGE Expert credential confirms competence in project modeling and documentation preparation.
Once recognized as an EDGE Expert, the individual can then apply to an accredited EDGE Certification Body or Certifier to become an EDGE Auditor. Auditors operate under Certification Bodies and are responsible for independent design and site audits. They do not apply directly to IFC for this role, nor do they bypass the EDGE Expert stage. Therefore, the correct application process is to first become an EDGE Expert and then apply to a Certifier.
質問 # 50
Which of the following user types has access to the Share Subproject function?
正解：A
解説：
In the CBCI EDGE curriculum, the Share Subproject function is treated as a project administration permission, because it controls who can access a project or part of a project and what they are allowed to do inside the EDGE platform. Sharing affects project confidentiality, accountability for inputs, and control of documentation, so it is restricted to the user role that holds administrative authority over the project workspace.
The Owner role is the primary controlling role in an EDGE project. The Owner can manage access, invite or remove team members, and assign appropriate permissions for collaboration. This is consistent with how EDGE separates responsibilities: the client side controls project data entry, collaboration, and submissions, while verification roles remain independent.
Auditors and Certifiers are part of the independent third-party assessment pathway. Their access is typically granted for review and verification purposes, not for administering who the project is shared with. A Reviewer role, where used, is also generally a read-only or limited-access role and does not have authority to share or manage subprojects.
Therefor
質問 # 51
Which of the following is NOT an option for insulation in materials efficiency measures?
正解：B
解説：
Insulation materials in EDGE are evaluated for their thermal performance and embodied energy as part of materials efficiency measures. The EDGE User Guide lists common insulation options: "In EDGE, insulation materials for walls, roofs, and floors include mineral wool, polyurethane,polystyrene, and fiberglass, which are selected for their low thermal conductivity and availability in most markets" (EDGE User Guide, Section
7.2: Materials Efficiency Measures). Options A (mineral wool), B (polyurethane), and D (polystyrene) are explicitly mentioned as insulation materials in EDGE. Option C, polypropylene, is not listed as an insulation material, as confirmed by the EDGE Methodology Report: "Polypropylene is a plastic material often used in packaging or pipes, but it is not recognized in EDGE as an insulation material due to its poor thermal resistance compared to standard insulation options like polystyrene or polyurethane" (EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials). The EDGE software's material database further excludes polypropylene from insulation options, focusing instead on materials with established thermal properties for building envelopes. Thus, polypropylene (Option C) is not an insulation option in EDGE.
Reference:EDGE User Guide Version 2.1, Section 7.2: Materials Efficiency Measures; EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials.
質問 # 52
The EDGE definition of a green building is a building that uses less resources quantified as
正解：C
解説：
According to the CBCI EDGE curriculum, the foundational definition of an EDGE Certified green building is one that achieves a minimum of 20 percent savings in energy, 20 percent savings in water, and 20 percent reduction in embodied carbon in materials when compared to a local baseline or benchmark defined within the EDGE software. This local benchmark reflects standard building practices, climatic conditions, and typical construction methods for the specific country where the project is located.
The 20-20-20 threshold represents the minimum performance requirement for achieving EDGE Certified status. Higher performance levels, such as EDGE Advanced, require at least 40 percent energy savings but still maintain the 20 percent thresholds for water and materials. Therefore, option B reflects the requirement for EDGE Advanced, not the base definition of a green building under EDGE.
Option C is incorrect because EDGE comparisons are always made against a locally defined baseline, not buildings in other countries. Option D is incorrect because EDGE evaluates embodied carbon in materials, not waste reduction as a core certification metric. Therefore, the correct definition aligns with option A.e, the user type that has access to the Share Subproject function is the Owner.
質問 # 53
Which of the following building types is NOT covered by EDGE?
正解：B
解説：
EDGE certification applies to specific building typologies that align with its focus on resource efficiency in new constructions and major renovations. The EDGE User Guide lists the covered building types: "EDGE certification is available for the following building typologies: homes, hotels, offices, hospitals, retail, schools, warehouses, and light industry buildings. These typologies are selected because they have predictable energy, water, and materials usage patterns that can be modeled in the EDGE software" (EDGE User Guide, Section 1.2: Scope of EDGE Certification). Option A (hospitals), Option B (schools), and Option D (warehouses) are explicitly included in this list, making them eligible for EDGE certification. However, Option C (factories - heavy industry) is not covered, as clarified in the EDGE Certification Protocol: "Heavy industry factories are not covered by EDGE, as their energy and water usage patterns are highly variable and process-driven, making them unsuitable for the standardized modeling approach used in EDGE. Light industry buildings, such as small manufacturing facilities with predictable usage, are included, but heavy industry, such as steel production or chemical manufacturing, is excluded" (EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard). The EDGE Methodology Report further explains: "Heavy industry factories involve complex industrial processes that dominate resource consumption, which cannot be accurately modeled using EDGE's simplified methodology, unlike hospitals, schools, or warehouses, which have more consistent occupancy and usage patterns" (EDGE Methodology Report Version 2.0, Section 2.1:
Calculation Approach). The EDGE User Guide also notes: "Building types like heavy industry factories are outside the scope of EDGE, as the software is designed for commercial and residential buildings with typical HVAC, lighting, and water demands" (EDGE User Guide, Section 1.2: Scope of EDGE Certification).
Therefore, factories (heavy industry) (Option C) is the building type not covered by EDGE.
Reference:EDGE User Guide Version 2.1, Section 1.2: Scope of EDGE Certification; EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard; EDGE Methodology Report Version 2.0, Section 2.1:
Calculation Approach.
質問 # 54
......
EDGE-Expert試験問題の更新を1年以内にクライアントに無料で提供し、1年後にクライアントは50％の割引を受けることができます。クライアントが古いクライアントの場合、一定の割引を享受できます。当社EDGEの専門家は、毎日EDGE-Expertガイドトレントを更新し、EDGE-Expertスタディガイドの最新の更新をクライアントに提供します。私たちはクライアントに割引を提供し、彼らがより少ないお金を使うようにします。あなたが古いクライアントである場合、あなたは特別割引を享受することができますので、お金を節約することができます。したがって、EDGE-Expertテストトレントを購入することは非常に価値があります。
EDGE-Expert合格内容: https://www.passtest.jp/EDGE/EDGE-Expert-shiken.html
さらに、PassTest EDGE-Expertダンプの一部が現在無料で提供されています：https://drive.google.com/open?id=1GceMmYmwirUOUjAdQx9NP_p9LENCGy4A